• Journal of Bio-Environment Control
• /
• v.25 no.4
• /
• pp.262-269
• /
• 2016

The objective of this study was to evaluate the effect of storage temperature on fruit quality attributes and physiological disorders including peel blackening in 'Sangjudungsi' persimmon (Diospyros kaki Thunb.) fruit stored in air at -1, 0.5 or $3^{\circ}C$ for up to 3 months. Higher storage temperature reduced ethylene production but not respiration rate, compared with lower storage temperature. Flesh firmness decreased continuously as storage time passed but firmness was reduced rapidly in the fruits stored at higher storage temperature. Fresh weight loss increased at higher storage temperatures. Soluble solids content was higher at lower storage temperature than at higher storage temperature. All color variables ($L^*$, $a^*$, $b^*$) were reduced by lower storage temperature, compared with higher storage temperature, regardless of tissue regions. Fruit softening increased as storage duration advanced and with the increase in storage temperature. Results indicated that the 'Sangjudungsi' persimmon fruits stored at higher storage temperature ($3^{\circ}C$) could not retain fruit quality properly on account of lower flesh firmness and higher incidence of peel blackening and fruit decay, compared with lower storage temperature.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.11
• /
• pp.1186-1192
• /
• 2005

The relationship between bacteria and anaerobic archaea, sludge yield coefficient and nitrogen removal rate were investigated in intermittent aeration systems(I/A) with added archaea, I/A and conventional activated sludge system. As the archaea solution was added to the I/A reactor, organic removal rate as well as nitrogen removal rate increased. Also, sludge production rate in I/A system added the archaea was maintained lower than other systems because sludge yield coefficient was decreased due to the role of anaerobic archaea such as anaerobic degradation of organics. The experimental data supported the possibility of symbiotic activated sludge system with anaerobic archaea under intermittent aeration, leading to the enhanced nitrogen removal. Crucial results to be presented are: 1) specific oxygen utilization rate(SOUR) of the I/A-arch system was $2.9\;mg-O_2/(g-VSS{\cdot}min)$. SOUR and nitrification rate of the sludge from the I/A-arch system was higher than those from the I/A and A/S reactors. 2) Removal efficiencies of $TCOD_{Cr}$ in the I/A-arch, I/A and A/S reactors were 93, 90 and 87%, respectively. 3) Nitrification occurred successfully in each reactor, while denitrification rate was much higher in the I/A-arch reactor. Efficiencies of TN removal in the I/A-arch, I/A and A/S reactors were 75, 63 and 33%, respectively.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.16 no.1
• /
• pp.39-51
• /
• 2011

Acute toxicity test and behavioral change analysis of seawater acclimated Japanese medaka were conducted to identify the brine effects on fish by seawater desalination. 7 day acute toxicity test of brine revealed linear concentration-response relationship from 40.0~80.0 psu treatment groups. There was no significant brine effect for 30-40 psu groups and mass mortality was observed from >50 psu exposure (7-day $LC_{50}$=51.4 psu). Images from the real time camera system were analyzed to observe the changes in behavioral patterns of medaka exposed to various salinity. 40.0 and 50.0 psu exposed groups were stabilized in behavioral patterns after 3.1 and 4.6 hours, respectively and 60.0 psu group showed sharp increase in activity during first 12 hours and 50% mortality thereafter. Similar patterns were observed to 70 and 80 psu groups and both experimental groups showed 100% mortality within 12 hours. Acute toxicity test and behavioral patterns showed very similar toxicity results which revealed the increases in mortality and behavioral activities from 50.0 psu. This critical salinity for fish impacts must be implemented to brine discharge strategy by seawater desalination into the coastal area. Also, we recommend that real time camera monitoring system must be a useful tool for early warning of fish toxicity for other applications. This research was funded by Ministry of Land, Transport and Maritime Affairs, Korea.

• Journal of Nutrition and Health
• /
• v.52 no.4
• /
• pp.354-368
• /
• 2019

Purpose: This study evaluated the glycemic response of diets using estimated glycemic load (eGL), which had been developed for mixed meals for Korean adults, and examined its associations with cardiometabolic risk factors among Korean adults. Methods: A total of 4,655 men and 6,760 women aged 19 years and above were included from the 2013 ~ 2016 Korea National Health and Nutrition Examination Survey. eGL was calculated by each meal (breakfast, lunch, dinner, and snack) and then summed to give daily total eGL. A multiple logistic regression analysis was used to examine the association. Results: Mean daily total eGL was 112.6 in men and 99.3 in women. Daily total eGL was positively associated with carbohydrate and fiber intakes, but negatively associated with protein and fat intakes in both men and women (p < 0.05 for all). Daily total eGL showed an inverse association with HDL-cholesterol level in both men and women (p = 0.0036 for men and p = 0.0008 for women). Men in the highest quintile of daily total eGL showed a 66% increased risk of hypercholesterolemia (OR, 1.66; 95% CI, 1.10 ~ 2.50; p for trend = 0.0447) compared with those in the lowest quintile. Conclusion: These findings suggest that eGL based on carbohydrate, protein, fat and fiber intakes can reflect glycemic response and therefore can be used as an index for dietary planning, nutrition education and in the food industry.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.5 no.1
• /
• pp.47-55
• /
• 1999

Applications of chitosan are related to molecular weight and degree of deacetylation(DOD) of chitosan completely. The molecular weight and DOD were greatly affected by the concentration of solution time and temperature. The degree of demineralization was not significantly different at $50^{\circ}C\;and\;70^{\circ}C$ after 30 minutes. Deproteinization decreased as process time increased. The nitrogen content was reached to 6.92% after 90 minute at $80^{\circ}C$, which is similar to theoretical nitrogen content of chitin. The DOD was 82.84% after 2 hours reaction and increased as the reaction time increased in the process. Viscosity and molecular weight are increased as recycling number of concentrated NaOH solution increased. Chemical, biological and physical properties of chitosan depend on the DOD and molecular size of the molecule. Tensile strength of the films from acetic acid solutions was between $28.9{\sim}33.6$ MPa and was generally higher than that of the films from lactic acid. Elongation of the films from lactic acid was between $97.0{\sim}109.7%$ and was generally higher than that of the films from the acetic acid. Water vapor permeability of the films prepared from lcetic acid solutions was between $1.9{\sim}2.3ng{\cdot}m/m^2{\cdot}s{\cdot}Pa$ and was generally higher than that of the films from the acetic acid.

• Korean Chemical Engineering Research
• /
• v.58 no.4
• /
• pp.618-623
• /
• 2020

Spherical phenolic resin beads were synthesized by suspension polymerization at 98 ℃ from phenol, ortho-cresol, formaldehyde, with triethylamine as a basic catalyst, and spherical phenol-cresol copolymer resin beads with relatively low crosslinking density as well. Phenol reacts with formaldehyde at two ortho- and one para- positions to form a crosslinked structure, but ortho-cresol instead of phenol reduces the crosslinking density during copolymerization due to the methyl group at a ortho- position. As a result, spherical phenol-cresol copolymer beads showed more shrinkage with decreasing apparent density compared to the spherical phenol beads when carbonized at 700 ℃ under nitrogen. As the molecular weight of the cresol oligomer increases, the pore radius of the carbonized copolymer beads decreases, which is consistent with the density and shrinkage results. It was confirmed that the characteristics such as density decrease, shrinkage, yield and so on during carbonization can be controlled by controlling the degree of crosslinking of the spherical phenolic resin particles with cresol.

• Journal of Bio-Environment Control
• /
• v.15 no.4
• /
• pp.364-368
• /
• 2006

This experiment was carried out to figure out the $CO_2$ biomass and the growth response of Chinese cabbage and radish grown under the condition of high temperature and high $CO_2$ concentration to provide the information for the coming climatic change. Chinese cabbage and radish were cultivated in spring and autumn seasons under 4 treatments, 'ambient temp.+ambient $CO_2$ conc.', 'ambient temp.+elevated $CO_2$ conc.', 'elevated temp.+ ambient $CO_2$ conc.', and 'elevated temp. +elevated $CO_2$ conc.'. The 'elevated temp,' plot was maintained at 5 higher than 'ambient temp. (outside temperature)'and the 'elevated $CO_2$ cone.' plot was done in 650 ppm $CO_2$. The growth of spring-sown Chinese cabbage was worse than autumn-sown one, and was affected more by high temperature than high $CO_2$. concentration. The $CO_2$ biomass of Chinese cabbage was lower as 25.1-39.1 g/plant in spring-sown one than 54.8-63.4 g/plant of autumn-sown one. Daily $CO_2$2 fixation ability was not significantly different between spring- and autumn-sown Chinese cabbage as 1.9-2.9, 2.7-3.1 kg/10a/day, respectively. The $CO_2$ biomass of radish were 87.4-104.6 /plant in spring-sown one and 51.3$\sim$76.4 g/plant in autumn-sown one. Daily $CO_2$ fixation ability of radish were 6.2-10.1 kg/10a/day in spring-sown one and 4.6-6.9 kg/10a/day in autumn-sown one.

• Journal of Bio-Environment Control
• /
• v.19 no.1
• /
• pp.19-24
• /
• 2010

The experiment was implemented to introduce the drainage electrode irrigation system as early as possible after transplanting in order to save the nutrient solution in a convenient way. Drainage electrode irrigation method was introduced 15, 19 or 22 days after transplanting after irrigation was firstly controlled by time clock. Time clock method was also treated as a control plot. Drainage electrode method could be adopted from 15 days after transplanting, 15 days earlier than the present introducing time. The growth and yield was better in treatments with drainage electrode method. Water and fertilizer use efficiency were the highest in the treatment of 15 days, the lowest in time clock treatment.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.259-259
• /
• 2012

Mo-Cu 합금은 열전도도, 전기전도도가 우수하고 합금조성에 따라 열팽창계수의 조절이 가능하여 반도체소재, 방열소재, 접점소재 등에 적용가능성이 높은 재료로 주목받고 있다. 또한 상태도 상에서 고용도가 전혀 없기 때문에 박막을 제작하였을 경우, 나노 복합체 형성이 용이하고 질소 분위기에서는 MoN-Cu로 상분리가 가능하여 하드상과 소프트상의 물성을 동시에 보유한 박막 제작이 가능하다. 또한 고온에서 산화반응에 의해 생기는 $MoO_3$, $CuO_3$와 같은 준안정상의 산화물들은 육방정계 구조(HCP)를 가지며 전단특성이 우수하여 자동차 저마찰 코팅재료로써 많은 연구가 진행되고 있다. 반면, Mo-Cu 는 상호간에 고상은 물론 액상에서도 고용도가 전혀 없기 때문에 일반적인 방법으로는 합금화 또는 복합화가 어렵다. 또한 Mo-Cu 박막을 제작할 경우 복수의 타겟을 이용해야 하기 때문에 성분조절과 구조적 제어가 불리하고 공정의 복잡화라는 단점을 가지고 있으며 추가적으로 다른 원소를 첨가하여 3원계, 4원계 이상의 박막을 형성하는 것에 한계가 있다. 따라서 본 연구에서는 위와 같은 문제점을 해결하기 위하여 상호간의 고용도가 없는 재료의 합금화가 용이한 기계적 합금화법(Mechanical Alloying)을 이용하여 Mo-Cu 합금분말을 제조하였고, 준안정상태의 구조의 유지가 가능한 방전 플라즈마 소결법(Spark Plasma Sintering)을 이용하여 합금타겟을 제작하였다. Mo-Cu 박막은 제작된 합금타겟을 사용하여 DC 스퍼터링 공정으로 제작하였다. Mo-Cu 박막의 공정조건으로는 타겟조성, 공정분위기, 가스 비율로 정하여 실험을 진행하였다. 제작된 박막은 자동차 코팅재료로써의 적용가능성을 보기 위해서 내열성, 내식성, 내마모성의 특성을 평가하였다.

• Microbiology and Biotechnology Letters
• /
• v.45 no.1
• /
• pp.1-11
• /
• 2017

In this review, we focus on one of the most attractive biomaterials, microfibrillated cellulose (MFC). MFC, a type of nanocellulose, mainly originates from cellulose in lignocellulosic biomass. MFC represents one of incredible important natural resources due to its abundancy, renewability, and sustainability. MFC is produced through mechanical pretreatment, and it is composed of various sizes of microfibers, ranging from a few nanometers to a few micrometers. Because of the heterogenetic compositions of MFC, it possesses superior properties as a material, such as high surface area, high aspect ratio, and peculiar insolubility as a biomaterial. These properties allow MFC to be used in various bio-industries, from the traditional pulp industry to the high-tech food/bio/chemical/medical industries. However, it is difficult to use MFC on a commercial scale owing to the high energy input required during its production and the challenge of controlling its reactivity. Therefore, future studies should be focused on accurately characterizing MFC's surface morphologies, regulating its characteristics in a desirable direction, and standardizing proper guidelines for the analysis of surface morphologies its analysis.