• Korean Journal of Food Science and Technology
• /
• v.39 no.6
• /
• pp.600-607
• /
• 2007

In this study, attempts were made to develop a method for controlling the volatile sulfur compounds in garlic. Crude alliinase extracted from fresh garlic was applied to garlic pulp blanched far 5 min at $100^{\circ}C$, and the changes in the thiosulfinates and volatile compounds of the blanched garlic pulp reacted with the enzyme were investigated. Eight kinds of thiosulfinates from garlic were separated by HPLC, and identified by LC/MS/MS. When the alliinase was added to the blanched garlic pulp at 100, 200, 300, or 400 units, and reacted for 15 min, respectively, thiosulfinates were generated in the amounts of 37, 68, 77, and 80% of the fresh garlic content (control). Under the same conditions, we analyzed the volatile compounds, where 28 peaks were identified by GC/MSD. Of the 28 peaks, 23 were volatile sulfur compounds. The results of the analysis showed that all the volatile compounds were generated at amounts of 25, 36, 66, and 76% of the content of the control, respectively. These results indicate that the sulfur compound content of garlic can be regulated, depending upon the reaction conditions of allinase.

• KSBB Journal
• /
• v.13 no.1
• /
• pp.96-100
• /
• 1998

Two promoters (trc and P$\rho$) were inserted in PHA operon derived from Alcaligenes eutrophus to obtain high chain molecules of polyhydroxybutyrate (PHB) in recombinant Escherichia coli. Newly designed PHA operon was used to control the gene expressions of hydroxybutyric CoA and PHA polymerization, separately. Plasmids containing new synthetic operon was transformed into E. coli DH5$\alpha$ and analyzed for PHB production. Without induction of the PHA biosynthetic operon, PHA synthase which has low activity might supply low concentration of initiator during the polymerization reaction, resulting very high molecular weight of polymer. An increase of PHB average molecular weight was observed with decreased IPTG (isopropyl $\beta$ -Dithiogalactosidase) concentration. When no IPTG was added to the culture of E. coli DH5$\alpha$ /$\rho$ SJS1 which contained two promoters in PHA operon, high chain polymer having an average molecular weight of $2.5{\times}10^7$ was achieved. Analysis of the enzyme activities of PHA biosynthetic enzymes suggests that PHA synthase, the enzyme responsible for polymerizing 3-hydroxybutyric CoA, controls the molecular weight of PHB produced in vivo.

• Journal of the Korean Electrochemical Society
• /
• v.17 no.4
• /
• pp.209-215
• /
• 2014

We report on the electrocatalytic activities at Pt nanostructure surfaces electrodeposited with different deposition charges on indium tin oxide electrodes for oxygen reduction and methanol oxidation reactions. The surface properties of Pt nanostructures depending on deposition charges were characterized by scanning electron microscopy, electrochemical surface area measurement, X-ray diffraction, and CO stripping analysis, which were correlated to the electrocatalytic activities. Pt nanostructures with deposition charge of 0.03 C exhibited the highest electrocatalytic activity for oxygen reduction and methanol oxidation. The sharp sites of Pt nanostructure and the presence of highly active facet play a key role, whereas the electrochemical surface area does not significantly affect the electrocatalytic activity. The results obtained in this work with regard to the dependence of electrocatalytic activity on the variation of the Pt nanostructures will give insights into the development of advanced electrocatalytic systems.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.725-728
• /
• 1996

This study was conducted to investigate effect of leaf temperature on light response and respiration during short-term exposure to a sequnce of PPFD cycle(100-200-300-400$\mu$ mol m$^{-2}$ s$^{-1}$ ) under increasing leaf temperature sequnce up to 3$0^{\circ}C$ and in dark condition, increasing up to 46$^{\circ}C$ with step size (1$^{\circ}C$) in Panax ginseng C. A. Meyer. When leaflet exposed to low light intensity and temperature, Rubisco activity was higher than remained activity in high condition. Leaves adapted to 100$\mu$mol m$^{-2}$ s$^{-1}$ PPFD had a peak response similar to that of 200$\mu$mol m$^{-2}$ s$^{-1}$ at 18$^{\circ}C$, but in above PPFD cycle(300, 400$\mu$mol m$^{-2}$ s$^{-1}$ ) it represented at 17$^{\circ}C$ and 16$^{\circ}C$, re-spectively. $CO_2$ evolution in dark condition increased rapidly when leaf temperature was increased up to 28$^{\circ}C$ and then 'dipped' below steady-state level from above 4$0^{\circ}C$. Thus, Pananx ginseng is able to take advantage of irradiance increase and decrease of $CO_2$ evolution in dark condition to control leaf temperature.mperature.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.417-421
• /
• 2005

Novel two synthetic technics using cationic ring-opening copolymerization of tetrahydrofuran (THF) and ethylene oxide (EO), or just polymerized EO on Poly-THF, could lead to random hydroxyl-terminated poly(EO-ran-THF) or tri-block PEG-PTHF-PEC, respectively. These reactions were carried out using $BF_3O(C_2H_5)_2$ as catalyst, 1,4-butanediol or PTHF as diol initiator. Copolymer structures were controlled by monomer feed ratio, or initial PTHF and EO monomer added amount. The molecular weight of polymer was merely dependant on the ratio of [monomer]/[diol], but not on catalyst. Well-defined random and block hydroxyl-terminated copolyether was found to be as the prepolymer for the propellant binder from the experiment to polyurethane with them.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.4
• /
• pp.369-376
• /
• 2012

In this study, to reduce the hydration heat velocity (HHV) of high-strength mass concrete at early ages, phase change materials (PCM) that could absorb hydration heat were applied, and the changes in autogenous shrinkage were investigated, as well as the relationship between the hydration temperature and autogenous shrinkage. The acceleration of the cement hydration process by the PCM leads to an early setting and a higher development of the compressive strength and elastic modulus of concrete at very early ages. The function of PCM could be worked below the original melting point due to the eutectic effect, while the hydration temperature and HHV of high-strength mass concrete can be decreased through the use of the PCM. A close relationship was found between the hydration temperature and autogenous shrinkage: the higher the HHV, the greater the ultimate autogenous shrinkage.

• Journal of the Korean Chemical Society
• /
• v.24 no.3
• /
• pp.259-265
• /
• 1980

Poly (styrene-b-methyl methacrylate) (PS-b-PMMA) was synthesized by free radical telomerization: the telomerization of styrene with $CCI_4$ by using AIBN as initiator followed by a second telomerization of methyl methacrylate using $CCI_3$ end group of the resulting polymer as the macrotelogen, with AIBN initiation, gave the styrene-methyl methacrylate block copolymer. The effects of the concentration of the macrotelogen, the concentration of monomer, the molecular weight of the macrotelogen, the reaction temperature and the concentration of the solvent on the formation of the block copolymer were investigated. Block copolymers containing up to 10 weight percent PMMA were obtained by adjusting the reaction conditions.

• Korean Chemical Engineering Research
• /
• v.43 no.4
• /
• pp.452-457
• /
• 2005

Foam-type MFI zeolite catalyst was prepared by dispersing fine ($-0.2{\mu}m$) particles of MFI zeolite on silicalite foam. Catalytic cracking of n-octane was investigated over the foam-type catalyst and Delplot method was employed to interpret product compositions for deducing reaction mechanism. The Si/Al molar ratio of dispersed MFI zeolite was estimated 25 and its dispersed amount of silicalite foam was 25 wt％. Since the apparent density of the foam type catalyst was very low $0.11g{\cdot}cm^{-3}$, the catalyst loading amount could be varied from 0.02 g to 0.5 g without concerning pressure drop, providing a wide variance in the residence time of the reactants and products. The conversion and olefin yield in the catalytic cracking of n-octane increased with the catalyst loading. The product composition was very simple and could be explained by applying the protolytic cracking mechanism when the catalyst loading was small. Higher loading of the catalyst brought about further reactions of cracked products, accumulating lower olefin and paraffin with low reactivity in product stream and resulting in complex product composition.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.5
• /
• pp.354-363
• /
• 2007

In order to investigate the optimum rate and interval of silicate fertilizer application for rice cultivation, Chucheong byeo variety, one of commonly cultivated rice cultivar in Korea was planted on two different wetland rice soils located on Hwaseong-si from 2002 to 2005; Jisan series(a member of the fine loamy, mixed, mesic family of Fluvaquentic Endoaquepts), known as "Productive Paddy Soil", without any conspicuous limiting factor, and Seokcheon series (a member of the coarse loamy, mixed, nonacid, mesic family of Fluvaquentic Endoaquetps), known as "Sandy Paddy Soil", sandiness being major limiting factor. There were three rate treatments of silicate fertilizer application; the amount of silicate fertilizers needed to adjust the available soil silicate contents to 130, 200, and $270mg\;kg^{-1}$ was applied, in the first year only. There was an additional plot; applying the amount of silicate fertilizer needed to adjust soil available silicate to 130 ppm every year, which would serve as the base for the evaluation of residual effects of silicate fertilizers in the plots where different rates of silicate fertilizer were applied. From the yield data in first year, it was found that optimum available silica in the soil are $154mg\;kg^{-1$ and $160mg\;kg^{-1}$, in Jisan and Seogcheon soils, respectably. The duration of residual effects of silicate fertilizer was different depending upon the amount of applied silicate fertilizers and the soils. The higher the application rate, the residual effect lasted longer, and the residual effect was lasted longer in Jisan(clay loam) soil than in Seogcheon(sandy loam) soil. During four years, sum of the rate of contribution to increase available soil silica of applied silicate fertilizer in different soils ranged 18.6% and 24.1% in Jisan soil and Seogcheon soil, respectively. This may suggest that much portion of applied silicate would be either lost from the soil or remain in the soil as insoluble form. This deserves further study.

• Journal of Korea Water Resources Association
• /
• v.52 no.11
• /
• pp.917-929
• /
• 2019

Denitrification in streams is of great importance because it is essential for amelioration of water quality and accurate estimation of $N_2O$ budgets. Denitrification is a major biological source or sink of $N_2O$, an important greenhouse gas, which is a multi-step respiratory process that converts nitrate ($NO_3{^-}$) to gaseous forms of nitrogen ($N_2$ or $N_2O$). In aquatic ecosystems, the complex interactions of water flooding condition, substrate supply, hydrodynamic and biogeochemical properties modulate the extent of multi-step reactions required for $N_2O$ flux. Although water flow in streambed and residence time affect reaction output, effects of a complex interaction of hydrodynamic, geomorphology and biogeochemical controls on the magnitude of denitrification in streams are still illusive. In this work, we built a two-dimensional water flow channel and measured $N_2O$ flux from channel sediment with different bed geomorphology by using static closed chambers. Two independent experiments were conducted with identical flume and geomorphology but sediment with differences in dissolved organic carbon (DOC). The experiment flume was a circulation channel through which the effluent flows back, and the size of it was $37m{\times}1.2m{\times}1m$. Five days before the experiment began, urea fertilizer (46% N) was added to sediment with the rate of $0.5kg\;N/m^2$. A sand dune (1 m length and 0.15 m height) was made at the middle of channel to simulate variations in microtopography. In high- DOC experiment, $N_2O$ flux increases in the direction of flow, while the highest flux ($14.6{\pm}8.40{\mu}g\;N_2O-N/m^2\;hr$) was measured in the slope on the back side of the sand dune. followed by decreases afterward. In contrast, low DOC sediment did not show the geomorphological variations. We found that even though topographic variation influenced $N_2O$ flux and chemical properties, this effect is highly constrained by carbon availability.