• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.1108-1112
• /
• 2005

보(round-crested weir)는 수로나 하천의 수위를 조절 과 취수 등의 편의를 제공하기 위해 건설되는 하천 구조물이다. 일반적으로 보의 수리특성은 자유 월류라는 측면에서 댐의 여수로와 유사하지만 하류 수위가 높아져 수중(submerged)에 잠기게 되면 보의 수리 특성은 여수로와 다르게 해석하여야 한다. 기존의 연구에서는 하류수위조건에 따라 4가지의 경우 1) 사류, 2) 도수현상을 수반한 상류, 3) 사류흐름으로 인한 도수발생, 4) 잠김상태(submerged)로 구분하고 있다(Chow ,1952). 그러나 이에 대한 흐름 해석은 대표적인 보에 대해 제안된 식으로 각 경우에 대한 정확해 해석은 어려움이 있다. 특히 하천에 수문과 동시에 보가 설치될 경우 그 차이는 클 것으로 판단된다. 본 연구에서는 하천에 설치되는 보와 수문에 대한 실험연구로써 보의 높이에 비해 수위가 과다하게 높은 경우에서의 수위-유량관계를 이론식과 기존 웨어공식에 대해 각각 비교하여 그에 대한 차이를 검토하였으며 하류수위에 대한 상류수위변동 시점을 측정하여 하류수위의 영향을 받는 임계수심을 제안한 Knapp(1960)식과 비교하였다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.349-353
• /
• 2006

국내에서도 최근 이상기후 현상이 빈번하게 발생하고 있고, 이로 인해 매년 봄가뭄과 여름홍수가 반복적으로 발생하여 효율적 수자원 관리의 중요성이 더욱 강조되고 있다. 최적 저수지 운영을 통한 효율적인 수자원 이용으로 과다한 무효 방류와 같이 낭비되는 수자원을 절감시켜 신규 수자원 개발과 유사한 효과를 획득하고, 기존 시설에 의한 지역 용수의 안정적인 공급으로 신규 수자원 개발 억제에 의한 비용 절감의 필요성과 유역의 수자원 변화를 평가하기 위한 모형의 개발이 필요하다. 본 연구에서는 저수량 확보, 생활.농업.공업.하천유지용수 공급, 홍수조절, 수력발전 등의 다양한 목적들을 적절히 고려하고, 사용자의 요구에 따라 목적별 우선권을 변경할 수 있도록 적절한 membership 함수를 구축하여 fuzzy DP 모형을 개발하였다. 또한, 개발된 fuzzy DP 모형에 소양강 다목적댐의 기왕의 수문자료를 도입한 모형의 최적화 운영결과와 기왕의 실적자료를 비교 검토하여 최적화 운영의 우수성을 확인하였다. 본 연구의 결과는 향후 저수지의 효율적인 운영을 위한 지침으로 사용될 수 있을 것이며, 유역의 수자원 영향 평가에 활용할 수 있을 것으로 기대된다.

• KOREAN POULTRY JOURNAL
• /
• v.25 no.9 s.287
• /
• pp.119-123
• /
• 1993

요즈음 날씨같이 낮에는 전형적인 혹서기를 나타내나 밤이되면 썰렁해져서 자다가도 이불을 찾게 되는데 이런 경우 병아리는 어떤 영향을 받게될까? 병아리날개는 피부보다도 더 예민하여 저온 스트레스를 받게되면 금방 흉터가 생기게 되며 이는 환우를 할때까지 없어지지 않는다. 또한 복부를 덮고 있는 피부는 종이같이 얇으며, 자체 체온조절기능이 미숙하여 외부의 기온영향을 장기에 바로 받게된다. 번개가 치고 난 이후 변압기 등이 손상되었을때 폐사가 많이 나는 이유도 이런데 있는 것이다. 온도관리가 그만큼 중요하다는 이야기이며 성장과도 직결되는 문제이다. 그러나 계절차이, 일교차, 수용시설, 수용수수 과다 등으로 실제 온도관리는 어려움도 많이 따르며 제대로 되지 않는 경우도 많이 볼 수가 있다. 더군다나 요즘같은 날씨에서는 더욱더 그러하다. 병아리는 입추 후 어느 일령에 다다르면 원래 가지고 있던 솜털을 벗으면서 첫번째 환우를 하게되는데 이것으로 병아리 상태파악과 관리에 응용할 수 있는 방법은 없을까?

• Nuclear Engineering and Technology
• /
• v.20 no.1
• /
• pp.19-26
• /
• 1988

The low leakage leading pattern has features as the placement of some fresh fuel assemblies in the core interior to reduce the neutron fluence on the pressure vessel and to enhance the neutron economics. But as fresh fuel assemblies are loaded in the core interior, the local power tends to exceed safety limit due to the high reactivity of the fresh assemblies. Therefore, a large number of burnable poisons must be utilized in a low leakage scheme to suppress the high assembly power as well as the excess reactivity. In this study the effects of burnable poisons are treated as a perturbation on the power distribution, and the 'Power Sensitivity Coefficient' concept is adopted. An application study is performed for cycle 1 of the Korea Nuclear Unit-7 (KNU-7) to justify the usefulness of the reverse depletion method coupled with the above concept. To obtain the optimal burnable poision distribution at the given burnup step, the linear programming technique is adopted. The result shows maximum 4.5% error in the amount of burnable poisons between the calculated and the reference values. It is concluded that the design methodology which consists of the reverse depletion, the power sensitivity coefficient concept, and the linear programming technique can be used to find the optimal turnable poison distribution.

• Journal of Korean Society of Steel Construction
• /
• v.17 no.3 s.76
• /
• pp.285-294
• /
• 2005

Drift design is one of the core techniques in the structural design of high-rise buildings and resizing technique is regarded as a practical drift design method for high-rise buildings. In the resizing technique, the structural weight is re-distributed to minimize the target displacement without a change in structural weights. However, the structural weight determined from resizing algorithm is bound to the structural weight based on the preliminary design. Therefore, in this paper, a drift design method that can control the weight of the structure without causing drift control performance to deteriorate is proposed by incorporating the weight control factor in the formulation of resizing algorithm. The proposed drift design method is applied to the drift design of two frame-shear wall systems. The proposed drift design method, in this study, makes it possible to control both the drift and weight of a high-rise building.

• Reproductive and Developmental Biology
• /
• v.29 no.1
• /
• pp.49-55
• /
• 2005

We cloned cDNA of the PGH(porcine growth hormone) gene and constructed retrovirus vector designed to express PGH gene under the regulation of CMV (cytomegalovirus) promoter. To maximize the expression, WPRE(woodchuck hepatitis virus posttranscriptional regulatory element) sequence was placed at the downstream of the PGH gene. After infection with recombinant viruses, approximately 1×10/sup 6/ PFF(porcine fetal fibroblast) cells released PGH protein into the media as much as 1,400 ng. In a subsequent experiment, a modifications of the retrovirus vector was made to express the PGH gene in a teracycline-inducible manner. In PFF cells carrying these viral vector sequences, addition of doxycycline to the media resulted in 2∼6 fold increase in PGH synthesis. In the modified retrovirus vectors, the WPRE sequence also played a role in boosting the effect of the tetracycline induction. This result indicates that our tetracycline-inducible expression system might be a promising candidate in alleviating the complicate physiological problems caused by constitutive expression of the exogenous genes in the transgenic animals.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.1
• /
• pp.111-121
• /
• 2017

Management condition of small business is very poor owing to entry barriers and excessive competition. Of course, it is believed that differences in competitiveness and result arise from characteristics of a businessman. Therefore, this study intends to grasp relationships between businessman's characteristics and management result of small business and to investigate moderating effects of trust in social capital on the management result. Through this, it mainly aims to draw implications to secure self-regenerating power of small business which faces various difficulties now. Research result is as follows: First, it was found that management result was influenced by the order of achievement need, risk-taking propensity and intuition among businessmen's characteristics. It seems to well reflect businessman's characteristics of the tendency to rely on his own intuition through confidence and an optimistic view. Second, there were moderating effects on confidence between achievement need and management result. Third, as implications to secure self-regenerating power of small business based on above contents, this study asserted to prepare various political measures in order to encourage achievement need of small business and then, to raise survival rates of small businessmen who face serious social problems today.

• Analytical Science and Technology
• /
• v.24 no.4
• /
• pp.282-289
• /
• 2011

Rapid screening method for the determination of the emissions of pollutants from vehicle interior parts and materials have been developed as ISO 12219-2 which is using bag and based on a static condition. The method was not controlled humidity in the test bag, so it is not suitable test method for formaldehyde emission test which is highly related to humidity condition. In this study, possibility of control humidity in the static test bag by adding extra water and the effect of humidity condition for formaldehyde emissions have been investigated. The relative humidity in the test bag was affected not only amount of water added also material of test bag and test specimen. The emission intensity of formaldehyde was increased according to increasing relative humidity in test bag. But excessively supplied water was condensed on the inner surface of test bag and surface of sample specimen that were sorption formaldehyde and were reduced its emission intensity.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.28 no.3
• /
• pp.7-39
• /
• 2002

The extensive variation in human cutaneous pigmentation is mainly due to differences in the rate of melanin synthesis by epidermal melanocytes, the relative amounts of eumelanin and pheomelanin synthesized, and the manner and rate of transfer of melanosomes from melanocytes to keratinocytes. Pigmentation is a complex trait that is regulated genetically and environmentally. One gene that has been receiving a lot of attention is the gene for the melanocortin 1 receptor The extensive polymorphism of this gene in human populations suggests its significance in the diversity of pigmentation. Exposure to solar ultraviolet radiation (UV) results in increased synthesis of a variety of growth factors, cytokines and hormones, and in modulation of their receptors in the epidermis. Knowledge about the regulation of pigmentation has led to strategies for clinical treatment of hyperpigmented skin lesions. Three main strategies are: 1) the use of chemicals that interfere with the melanin synthetic pathway, 2) the design of peptides or peptide-mimetics based on the structure of hormones that regulate eumelanin synthesis, and 3) the use of agents that reduce melanosome transfer from melanocytes to keratinocytes. All three strategies are expected to induce hypopigmentation, by inhibiting total melanin synthesis, eumelanin production, or the epidermal melanin unit, respectively.

• Progress in Medical Physics
• /
• v.15 no.4
• /
• pp.247-254
• /
• 2004

According to developing high energy linear accelerators and treatment methods, like (3 dimensional conformal radiotherapy (3D-CRT), intensity modulated radiotherapy (IMRT), many radiotherapy centers are replacing older linear accelerators with new higher technical machines. This often presents a shielding problem as the designed shield for the existing rooms is not adequate for the higher technical machines. Additional shielding in limited existing space becomes necessary. We are replacing older brachytherapy room with new higher technical linear accelerator for IMRT. This room is not adequate for the IMRT machine without additional shielding design. The logical development of optimum structural shielding designs with concrete and high density shielding blocks are presented. We obtained following results by comparison between the pre-calculating values and actual survey of completed LINAC installation. High density shielding blocks have more powerful radiation protection about 2 times.