• Journal of the Korea Society of Computer and Information
• /
• v.16 no.11
• /
• pp.35-44
• /
• 2011

Advances in science and technology have made a lot of changes in our life. Especially, sensors have used in various ways to monitor in real time and analyze the world effectively. Traditional sensor networks, however, have used their own protocols and architecture so it had to be paid a lot of additional cost. In the past 8 years, OGC and ISO have been formulating standards and protocols for the geospatial Sensor Web. Although the OGC SWE initiatives have deployed some components, attempts have been made to access sensor data. All spatial operations had to calculate on the client side because traditional SOS architecture did not consider spatial operation for GeoSensor. As a result, clients have to implement and run spatial operations, and it caused a lot of overload on them and decreased approachableness. In this paper we propose S-SOS for in-situ and moving GeoSensor that extends 52 North SOS and provides spatialFilter and spatialFinder operations. The proposed S-SOS provides an architecture that does not need to edit already deployed SOSs and can add spatial operations as occasion. Additionally we explain how to express the spatial queries and to be used effectively for various location based services.

• Science of Emotion and Sensibility
• /
• v.15 no.1
• /
• pp.37-46
• /
• 2012

We tested the effects of endogenous attention and reorienting on the performance of detection task. In the classic detection paradigm of Posner and Cohen (1980), performance on target detection is measured, where target appears either on the same or difference spatial location of cue stimulus after brief period of SOA (stimulus onset asynchrony). In this study, we induced exogenous attention by manipulating predictability of cue for target, and also induced reorientation by inserting additional (reorienting) cue between initial cue and target. Experiment 1 had three conditions of reorienting speed: Early, middle, and late. Facilitation and IOR (inhibition of return) occurred in different forms depending on SOA and reorienting speed, but we were not able to discover interpretable pattern in the results. However, reanalysis of early reorienting condition revealed that facilitation and IOR occurred in a crossed manner where short SOA found facilitation and long SOA did IOR, the typical results of simple detection task. Experiment 2 collected additional data to replicate the results in early reorienting condition of experiment 1. The results obtained that facilitation occurred with short SOA and IOR with long SOA. These results contrast with those of Wright and Richard (2000) where they reported elimination of IOR when cue had predictability of target locations. These results suggest that additional cue (here, orienting cue), which rapidly appears before extinction of IOR by prior cue, brings about double IOR. The present research demonstrates that even when attention is allocated to certain location via endogenous mechanism, rapidly repeating cues in certain location maximizes IOR that offsets the effects of endogenous attention to the same location.

• Cartoon and Animation Studies
• /
• s.39
• /
• pp.183-214
• /
• 2015

For a long time, Disney has made animations including world views such as family-focused, conservative ideology, happy ending, etc. for families. Periodical situation and spectators' demands have been changed little by little, but Disney is still a company who is the most successful both nominally and virtually in animation industry. For the secrets of their success, there is fantasy world of fabricated animation, thoroughly organized story and image. When spectators watch animations, their sufficient immersion in the fantasy is to let them forget realities. In the introduction of Disney animations, spectators turn off the switch of realities and turn on the switch of fantasy world through the procedure to recognize and confirm virtual world sufficiently. In the switch of the introduction used frequently by Disney, there are four methods. First is to start while opening the cover of storybook. Second is to start while storyteller gives a talk directly. Third is to start with live action film and continue to animation. Fourth is musical method. Those four switches play a role of the gate which distinguishes spectators' realities from Disney's fantasy clearly. The process makes an opportunity to set spectators who feel uneasy due to the vague boundary between realities and fantasy at ease and let them immerse in animation sufficiently with mind at ease.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.46-46
• /
• 2000

과학기술 및 산업의 발달로 인하여 실험 중 또는 공정 상에서 in situ, 실시간으로 측정하고 분석하며 이를 되먹임하는 품질제어의 중요성이 대두되고 있다. 반도체 공정 또는 박막제조 공정 중에서 박막의 두께, 굴절율, 물질의 조성비 등을 알아내는 것이 긴요한 과제로 대두되고 있으며, 이를 위하여 공정중인 제품의 품질을 실시간으로 평가하는 장비가 요구되고 있는 것이다. 나아가 공정중의 예상하지 못한 시료의 특성변화를 그대로 감지하여 적절히 보정해 주는 되먹임 기법은 높은 수율을 보장하는 첨단기법이라 할 수 있다. 이러한요구에 부응할 수 있는 본 제품(Elli-situ 2000)은 박막의 두께 표면변화를 sub 의 정밀도를 가지고 in situ, 실시간으로 정밀 측정할 수 있는 첨단 계측장비로서 빛의 편광상태 변화를 측정하기 때문에 공정 중의 시료에 영향을 주지 않는 비간섭 특성과 비접촉 특성의 장점 뿐만 아니라 공기중에서는 물론 진공이나 액체 등의 매질에서도 사용될 수 있어서 매질에 대한 제약이 거의 없다는 장점도 가지고 있다. 편광상태의 제어 및 측정을 필요한 광학장비의 경우, 제작이 까다롭기 때문에 대부분 가격이 높은 편이고 사용방법이나 측정 데이터에 대한 해석이 어렵다는 단점이 있으나, Elli-situ 2000의 경우 상용화된 외국제품(국내제품은 없슴)과 비교하여 성능 및 가격경쟁력에 있어서도 우위에 있으며 간단, 명료한 장비조작 및 컴퓨터를 사용한 구동의 전자동화를 이룸으로써 초보자도 쉽게 측정하고 데이터를 처리할 수 있도록 하였다. 또한 취부대의 경우, 진공포트 플랜지의 표준규격(2-3" Del-Seal 플랜지 규격)에 맞춤으로써 기존의 진공챔버에 부착하여 진공에 전혀 영향을 주지 않는 상태에서 시료의 변화를 in situ, 실시간으로 정밀 측정할 수 있도록 하였다. 하였다.O 박막은 산소 가스압력과 기판온도, 인가 전류를 변화시켜가며 증착하였으며 이에 따른 박막의 결정성 변화를 알아보았다. 기판온도를 실온에서 점차 증가시켜나가면 $\Delta$$\theta$50은 급격히 감소하며 30$0^{\circ}C$에서는 결정성이 우수한 막을 얻을 수 있었다. 또한 산소 가스 압력이 0.5~1mTorr에서 $\Delta$$\theta$50은 양호한 값을 나타내었지만 그 이상에서는 c-축 배향성이 나빠짐을 확인하였다. 따라서 대향타겟식스퍼터 장치를 이용하여 ZnO 박막을 증착시 가스압력 0.5~1mTorr, 기판온도 20$0^{\circ}C$이상의 막 제작조건에서 결정성이 우수하게 나타나는 것을 확인할 수 있었다. gluten이 단단해졌음을 알수 있었다. 유화제 stearly 칼슘, 혹은 hemicellulase를 amarans 10% 대체한 밀가루에 첨가하면 확연히 비용적을 증대시킬 수 있다는 사실을 알 수 있었다. quinoa는 명아주과 Chenopodium에 속하고 페루, 볼리비아 등의 고산지에서 재배 되어지는 것을 시료로 사용하였다. quinoa 분말은 중량의 5-20%을 quinoa를 대체하고 더욱이 분말중량에 대하여 0-200ppm의 lipase를 lipid(밀가루의 2-3배)에 대하여 품질개량제로서 이용했다. 그 결과 quinoa 대량 7.5%에서 비용적, gas cell이 가장 긍정적 결과를 산출했고 반죽의 조직구조가 강화되었다. 또 quinoa 대체에 의해 전분-지질 복합제의 흡열량이 증대된 것으로부터 전분-지질복합제의 형성 촉진이 시사되었다.이것으로 인하여 호화억제에 의한 노화 방지효과가 기대되었지만 실제로 빵의 노화는 현저히 진행되었다. 이것은

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.10
• /
• pp.83-91
• /
• 2021

In this paper, presents an efficient education method for training specialized edutainment SW education instructors and drone realistic media creators, not just training to acquire certificates through drone manipulation training. To this end, the NCS-based curriculum was derived. The developed curriculum includes the edutainment drone curriculum and the realistic media creator curriculum. Among them, core responsibilities were defined for the drone control curriculum and core tasks, knowledge, and attitudes were described for each. After that, a detailed curriculum for drone control was derived. In the realistic media creator curriculum, pilot education was conducted to actually produce advertisement videos to foster experts who can work directly in the industrial field. Finally, through holding an online conference in a metaverse environment, a virtual conference was operated to share and discuss media videos produced by trainees. After the end of education, the efficiency of this curriculum was proved through education satisfaction analysis for 46 education graduates. This paper presented a method to achieve internalization of SW education in non-face-to-face online education that our society must solve after post-COVID-19. In addition, an efficient educational method in a realistic media environment was suggested by showing a realistic media creator training curriculum, pilot programs, and metaverse conference management cases.

• Journal of the HCI Society of Korea
• /
• v.14 no.2
• /
• pp.49-60
• /
• 2019

With the appearance of self-driving cars and electric cars, the automobile industry is rapidly changing. In the midst of these changes, HMI studies are becoming more important as to how the driver obtains safety and convenience with controlling the vehicle. This study sought to understand how automobile manufacturers understand the driving situation, and how they define and limit driver interaction. For this, prior studies about HMI were reviewed and 15 participants performed an on-road study to drive vehicles from five manufacturers with using their interfaces. The results of the study confirmed that buttons and switches that are easily controlled by the user while driving were different from manufacturer to manufacturer. And there are some buttons that are more intensively controlled and others that are difficult to control while driving. It was able to derive 'selection and concentration' from Audi's vehicle, 'optimization of the driving ' from BMW's, 'simple and minimize' from Benz's vehicle, 'remove the manual distraction' from the vehicle of Lexus, and 'visual stability' from KIA's vehicle as the distinctive keywords for the HMI. This shows that each manufacturer has a different definition and interpretation of the driver's driving control area. This study has a distinct value in that it has identified the characteristics of vehicle-specific HMI in actual driving conditions, which is not apparent in appearance. It is expected that this research approach can be useful to see differences in interaction through actual driving despite changes in driving environment such as vehicle platooning and self-driving technology.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.15-27
• /
• 2022

An omnidirectional VR treadmill is a highly-immersive walking simulator that allows identical body movements, such as walking, running, and sitting. However, the operation difficulty of an omnidirectional VR treadmill may cause data reliability problems. Therefore, this study aims to verify the effectiveness of a VR treadmill by comparing the ability to orient in the real and virtual worlds spatially. For this purpose, a rotating and searching path experiment was conducted with participants. This experiment showed that there was no statistically significant difference in the ability of the participants to orient in the real and virtual worlds spatially. In addition, the omnidirectional VR treadmill requires an adaptation time for the users due to the difficulty in the treadmill operation. However, there was no significant difference in the difficulty felt by the participants according to the adaptation time. Hence, these findings supported the possibility of collecting realistic walking data without safety concerns through an omnidirectional VR treadmill. Furthermore, this treadmill could be used in future research to solve problems directly related to pedestrian safety, such as the interaction between vehicles and pedestrians.

• Journal of Sensor Science and Technology
• /
• v.5 no.2
• /
• pp.29-36
• /
• 1996

With the three dimensional magnetic field measuring system dealt with in this paper, accurate measurements and analyses of extremely low frequency(ELF) magnetic fields caused by starting and/or operating electric devices and power installations can be conducted. To obtain high performance for lower frequency and spatial components without any distortion, the measuring system is designed as three dimensionally including the multiturn loop-type magnetic field sensors, differential amplifiers and active integrators. As the results of calibration experiments, the frequency response characteristics of the measuring system range from 8[Hz] to about 53[kHz] for each direction of x, y, z axes, and the response sensitivities are 9.54, 9.21, $10.89[mV/{\mu}T]$, respectively. The actual survey experiments by using an oscillating impulse current generator confirm a reliability of the proposed measuring system. Also, through the other experiments by using small-sized induction motors, the magnetic field intensities when starting and steady-state operating mark 15.8, $8.61[{\mu}T]$ as maximum value, respectively. And those intensities decrease steeply according as the measuring distance increases.

• Journal of Bio-Environment Control
• /
• v.6 no.3
• /
• pp.159-167
• /
• 1997

To cope with the mass-production and supply of plug seedling, the supply of transplanters is necessary. In the study, a transplanting test was carried out to find the optimum working condition in the mechanizd transplantation and to acquire the basic data for the improvement of transplanters by the research and analysis of working capacity of the local manual transplanters. The size of hopper affected transplanting stand and rate. Re-irrigation was required for the transplanted seedlings because they wilt 1 day after the transplanting if soil compaction is incomplete. Consequently, back-forth-left-right compaction method was good for soil covering and compaction. It may be thought to increase the amount of irrigation water at the time of transplanting by double-irrigation mechanism, but it needs to increase the larger water tank which makes the operation uneasy. So, assuming the working model by 1 or 2 operators with the machine size as small as possible, it seemed that eliminating of automatic irrigation method was desirable in view of efficiency. Though semiautomatic transplanter needs some structural improvements, it seemed still suitable for transplanting of plug seedlings such as 45-day red pepper seedlings in 128-hole tray and 25-day Chinese cabbage seedling in 128-hole tray. If traveling speed of the transplanter is limited to less than 14 m/min, with the transplanting depth of 2~3cm and transplanting space of 30cm.

• Korean Journal of Food Science and Technology
• /
• v.18 no.6
• /
• pp.479-484
• /
• 1986

Two different types of solar collector for farm dryer- the flatplate type and the modified tubular type-were constructed and analyzed on their performances. The transparent plastic film, black painted galvanized iron sheet and black vinyl film were used for the cover and absorber of the flat-plate types. The simplified tubular type was constructed with transparent films for the cover and black vinyl films for the absorber Two elliptical iron rings were used to form a tubular shape through which air could pass. No remarkable differences were found in thermal efficiences between the absorbers made with galvanized iron sheet and black vinyl film. The average thermal efficiencies of the solar collectors were 42.8%(max.48.2%, min.38.2%) for flat plate type and 22.971 (max. 25.4%, min. 14.8%)) for tubular one. The empirical equations were proved to be applicable to the prediction of temperature elevation. The tubular solar heat collector was successfully applied to red peppers drying as a practical farm dryer. The drying rate was almost doubled compared to a conventional sun drying.