• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.696-698
• /
• 1997

The marine diesel engine have been widely applied with a mechanical hydraulic governor to control the ship speed for long time. But it was recently very difficult for the mechanical hydraulic governor to control the speed of engine under the condition of low speed and low load because of jiggling by rough fluctuation of rotating torque and hunting by dead time of diesel engine. In order to analyze the speed control system the transfer function was converted from z to w transformation. The author proposed velocity control system with feedback loop by PID controller in order to stabilize for unstable area. The influence of dead time was discussed by Nichols chart and unit step response curve. It was confirmed through computer simulation that the performance improvement of a mechanical hydraulic governor can be obtained by PID controller.

• Proceedings of the KIEE Conference
• /
• 1997.07b
• /
• pp.558-560
• /
• 1997

실제 디젤 자동차를 운행할 때 헌팅이나 서지현상이 발생하여 운전상 좋지 못한 현상이 발생한다. 자동차의 디젤기관은 회전수의 안정화를 도모하기 위해서 연료 분사펌퍼의 분사량 조정봉(Rack)을 가바나의 조속기에 의해 위치 제어할 필요가 있다. 본 연구에서는 헌팅을 억제할 목적으로 종래에 사용한 기계식 가바나 대신에 최근에 등장하고 비교적 자유로운 제어규칙을 갖도록 할 수 있는 전자식 가바나를 사용할 때 헌칭이 발생하는 조건이 시뮬레이션을 통하여 조사검토 할 수 있음을 나타내었다. 이 결과에 기초하여 헌칭의 억제는 운전상태에 따라 행할 수 있는 헌팅 억제 규칙을 얻었다.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.501-503
• /
• 2005

The improvement of load following operation of the thermal power plant is influenced to the electrical quality. Analysis of boiler, turbine, and governor system, and the study of control algorithm are preceded. The thermal power plant is operated by various control systems. In the case of faulty governor system, it takes long days to solve the problem and impossible to repair the mechanism without outage. A non-planned out-age is taken into consideration because of economical power production. In this paper, to clear the continuous swings of an old turbine governor system(YEOSU #1), the trend, the control logic, and the hydraulic mechanism are analyzed, and then the control circuit with ADAPT function and the 1st order lag circuit are inserted and modified. After that, the power plant comes to automatic governor control operation.

• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.84-87
• /
• 1996

This paper presents a energy function to reflect the control effect of speed governor which has a cut-off property which means position and rate limit The proposed energy function satisfies the semi-negativeness of its time derivative and well reflects the parameters of speed governor to the energy function. The transient stability analysis by the direct method for the single machine infinite bus system has been conducted with the use of the proposed energy function, which shows that the results by the direct method well agree with that by the conventional time simulation method. This thesis shows a possibility of more accurate stability analysis by taking into account the cut-off property of speed governor's output.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.52-53
• /
• 2007

현 CBP(Cost Based Pool)에서 주파수조정은 전기품질유지와 전력계통 안정성 확보에 절대적으로 필요한 계통운영보조서비스의 항목이다. 이는 해외 전력계통에서도 예외없이 채택하여 적용하고 있으며 적극적인 참여를 유도하기 위하여 다양한 비용보상 방안을 시행하고 있다. 순시 주파수조정은 발전기 조속기 특성에 따라 다양한 출력응동특성을 가지고 있으며 이에 따라 계통에 기여하는 바도 달라지게 된다. 따라서 주파수조정에 참여하는 발전기의 계통기여도에 따른 주파수추종운전 능력에 대한 평가를 계량화할 수 있는 방법이 요구된다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.11
• /
• pp.47-52
• /
• 2015

This paper derives the problems that occur when asynchronous transfer in case of phase, frequency, voltage between the emergency generator and the grid and proposed the countermeasure to solve this problem when the transfer switch replace ATS(Automatic Transfer Switch) with CTTS(Closed Transition Transfer Switch) for the non-interrupting switching. In order to simulate above cases, modelling was used the transient analysis program PSCAD/EMTDC. By using this, the customer installed emergency generator and the grid was implemented. We compared three cases of asynchronous transition based on the basic case and proposed improvement by controlling the governor of emergency generator.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.233-234
• /
• 2015

전기추진선박의 엔진발전기를 부하에 따라 가변속 운전하면 일정속도로 운전하는 것보다 연료를 절약할 수 있다. 내연 기관 엔진은 저속 운전 시 속도 리플로 인하여 운전이 불안정해지므로 저속 운전에 한계가 있다. 또 발전기 조속기의 느린 응답으로 속도 리플이 발생하기도 한다. 본 논문에서는 배터리 에너지 저장 장치를 이용하여, 과도 상태에서의 속도 리플을 감소시키는 제어 방식을 제안하여 가변속 엔진의 운전 범위를 넓히고자 한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.9
• /
• pp.64-72
• /
• 2012

The interest in wind power generation area such as developing and operating wind-diesel pilot complex in remote and island regions that have difficulty in having power plant and connecting to power system is growing rapidly in the world. We have installed and researched the hybrid system in Sekgok Pilot Complex to meet the new generation system. From the monitored data of the system, the performance of each diesel power plant is outstanding. However, step out problem was detected with respect to load sharing and synchronization with decentralized power supply. An advanced controller design having better response time and stability is needed to solve such problem. In this paper, we proposed the algorithm, through digital controller of Governor, which is applied to hybrid system. As a result, we obtained the stable frequency value in variable loading conditions. Also, we proved the advanced response time and stability through the simulation and experiment by applying additional current signal to the control algorithm.

• Journal of Advanced Marine Engineering and Technology
• /
• v.20 no.4
• /
• pp.20-26
• /
• 1996

Recently, for the speed control of a diesel engine, some methods using the modern control theory such as LQ control technique, or $\textit{H}_{\infty}$control theory etc., have been reported. However, most of speed controlers of a diesel engine ever developed are still using the PID control algorithm. And, as another approach to the speed control of a diesel engine, the authors proposed already a new method to adjust the parameters of the PID controller by a model matching method. In the previous paper, the authors confirmed that the proposed new method is superior to Ziegler & Nichols's method through the analysis of results of the digital simulations under the assumption that the parameters of a diesel engine are known exactly. But, actually, it is very difficult to find out the value of parameters of a diesel engine accurately. And the parameters of a diesel engine are changigng according to the operating condition of a diesel engine. So, in this paper, a method to estimate the parameters of the PID controller for the speed control of a diesel engine by means of the model matching method are proposed. Also, the digital simulations are carried out in cases either with or without measurement noise. And this paper confirms that the proposed method here is superior to Ziegler & Nichols's method through the analysis of the characteristics of indicial responses.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.3
• /
• pp.320-327
• /
• 1998

The purpose of this study is to design the intelligent speed control system for marine diesel engine by combining the Model Matching Method and the Nominal Model Tracking Method. Recently for the speed control of a diesel engine some methods using the advanced control techniques such as LQ control Fuzzy control or H$\infty$ control etc. have been reported. However most of speed controllers of a marine diesel engine developed are still using the PID control algorithm But the performance of a marine diesel engine depends highly on the parameter setting of the PID controllers. The authors proposed already a new method to tune efficiently the PID parameters by the Model Mathcing Method typically taking a marine diesel engine as a non-oscillatory second-order system. It was confirmed that the previously proposed method is superior to Ziegler & Nichols's method through simulations under the assumption that the parameters of a diesel engine are exactly known. But actually it is very difficult to find out the exact model of the diesel engine. Therefore when the model and the actual diesel engine are unmatched as an alternative to enhance the speed control characteristics this paper proposes a Model Refernce Adaptive Speed Control system of a diesel engine in which PID control system for the model of a diesel engine is adopted as the nominal model and a Fuzzy controller is adopted as the adaptive controller, And in the nominal model parameters of a diesel engine are adjusted using the Model Matching Method. it is confirmed that the proposed method gives better performance than the case of using only Model Matching Method through the analysis of the characteristics of indicial responses.