• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.356-359
• /
• 2011

In this study, applicable to Sounding Rocket about the development of high-performance propellant was studied. Sounding Rocket requires generally multistage rocket system for atmospheric research. This study describes the development of two types solid propellant compositions which are based on HTPB/AP for the two-stage rocket. CEA code of NASA and internal ballistic analysis were used for confirming the theoretical performance of designed propellants. The strand burner and JANNAF tensile test was used to measure ballistic and mechanical properties of designed propellants. Finally, static fired test of standard motors was performed to prove the possibility of development.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.8
• /
• pp.589-595
• /
• 2020

Large eddy simulation (LES) of a partially premixed gas turbine combustor is conducted. Four different hydrogen compositions are considered to investigate the fuel composition effects on the flow field inside the combustor. The comparison with the experimental flame structure and velocity profile is conducted to verify the LES results, revealing that the partially premixed flame structure is altered when hydrogen composition is changed. The flame structure becomes shorter and thicker as the hydrogen composition is increased, and therefore, the flame effect in the rigid wall is minimized. The change in the recirculation zone at the combustor wall with hydrogen addition is further investigated. Overall, the LES with combustion model is quite promising for accurately predicting the reactive flow characteristics in connection with the fuel composition.

• Asian Journal of Turfgrass Science
• /
• v.17 no.1
• /
• pp.1-12
• /
• 2003

Research was Initiated to investigate germination characteristics of cool-season grasses (CSG). Several turfgrasses were tested in different experiments. Experiments I and III were conducted under a room temperature condition of 16$^{\circ}C$ to 23 $^{\circ}C$ and under a constant light condition at 25 $^{\circ}C$, respectively. An alternative environment condition that is a requirement for a CSG germination test by International Seed Testing Association (ISTA) was applied in the Experiment II, consisting of 8-hr light at 25 $^{\circ}C$ and 16-hr dark at 15 $^{\circ}C$. In each experiment, data such as early germinating vigor, germination speed and germination rate were evaluated. Six turfgrass entries were comprised of two varieties each from Kentucky bluegrass (KB, Poa pratensis L.), perennial ryegrass (PR, Lolium perenne L.), and tall fescue (TF, Festuca arundinacea Schreb.), respectively. Significant differences were observed in early germinating vigor, germination speed and germination rate. Early germinating vigor as measured by days to 70% seed germination was variable according to environment conditions, turfgrasses and varieties. It was less than 6 days in PR and 6 to 9 days in TF. However, KB resulted in 11 to 13 days under an alternative condition and 11 to 28 days under a room temperature condition. The germination speed was fastest in PR of 7 to 10 days and slowest in KB of 14 to 21 days. However, intermediate speed of 10 to 14 days was associated with TF. There were considerable variations in germination rate among turfgrasses according to different conditions. Generally, PR and TF germinated well, regardless of environment conditions. However, a great difference was observed among KB varieties, when compared with others. Under a room temperature condition, total germination rate was 71.0% in Midnight and 77.7% in Award. And it increased under an alternative condition, which was 81.7% and 91.7% in Award and Midnight, respectively. However, the poorest rate was found under a constant temperature condition, resulting in 18.0% in Award and 15.3% in Midnight. These results suggest that an intensive germination test required by ISTA be needed prior to the decision of seeding rate, including early germinating vigor and germination speed as well as total germination rate. KB is very sensitive to environment conditions and thus its variety selection should be based on a careful expertise.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.6
• /
• pp.234-238
• /
• 2005

Effects of plasma composition, ion flux and ion energy on the etch rate, surface morphology and near surface stoichiometry of a single crystalline $La_3Ga_5SiO_{14}$ wafer have been examined in $Cl_2/Ar$ inductively coupled plasma (ICP) discharges. Maximum etch rate ${\sim}1600{\AA}/min$ was achieved either at relatively high source power $({\sim}1000W)$ or high $Cl_2$ content conditions in $Cl_2/Ar$ discharges. The etched surfaces showed similar or better RMS roughness values than those of the unetched control sample and the near surface stoichiometry was found not to be affected by ICP etching.

• Polymer(Korea)
• /
• v.27 no.4
• /
• pp.285-292
• /
• 2003

The compatibility of poly(lactic acid)/poly($\varepsilon$-caprolactone) (PLA/PCL) blends as a function of blend composition was studied and triphenyl phosphite (TPP) was applied to PLA/PCL blends as a reactive compatibilizer. Especially the effect of compatibility on the crystallization behavior in both PLA/PCL blends and PLA/PCL blends with TPP was considered. PLA/PCL blends were immiscible based on thermal characteristics of PLA/PCL blends and the miscibility was depend upon the blend composition. The enhancement of compatibility was found in PLA/PCL blends with TPP depend upon its content. The rate of crystallization in PLA/PCL blend varied with blend composition. This was understood as the development of nucleation at the interface of PLA-PCL due to the immiscibility. TPP was acting as a compatibilizer as well as an agent for the acceleration of spherulite growth In PLA. As a result, the crystallization rate increased and the size of spherulite became larger than that of PLA/PCL blend without TPP.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1452-1457
• /
• 2010

Recently, coal ash is used as resources to make controlled low-strength material (CLSM) which a self-compacted, cementitious material used primarily as a backfill in lieu of compacted fill. Pozzolanic reaction is strongly related with self-cementation of coal ashes. However, this reaction depends on pozzolanic content in fill materials and is disappeared in 2-3 days after placement of coal ash fill. Therefore, state of coal ash fill is commonly very loose and not appropriate for foundations of structures without special treatments. In this study, a coal ash placement device was developed to place coal ashes effectively to improve density of coal ash fills. The device consists of a ribbon type mixer to obtain homogeneous materials mixture and a piston type pump for density control of fill materials. Based on several laboratory test results, more stable coal ash fill state can be obtained with controlling placement pressure.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.2
• /
• pp.23-33
• /
• 1991

Mn - Zn Ferrite has the natural characteristics of incongruent melting and the zinc oxide evaporation while the crystal is being grown. As a result of these, it comes into existence to be a non-uniform distribution of cations along the crystal growth axis and also Pt particles are usually precipitated into the crystals in Bridgman method since the melt zone is maintained for a long time in the crucible. These have bad effects on the magnetic properties of ferrites. But, to overcome these faults and then acquire the better single crystals. new modified growth method was developed and the growth factors were investigated as following: melt height in the crucible, surface tension and density of melt, the behavior of melt at interface, the shapes of crucible and solid -liquid interface, powder feeding rate, and the crystal growing speed. In additon, when we analyzed the compositional fluctuations of grown crystals, they were supressed within 1.5 mol% $Fe_20_3$, 2 mol% MnO, ZnO respectively with comparing to initial composition of crystal and the microstructures of crystals on the(110) plane were observed by optical microscope through the chemical etching technique and the magnetic properties were determined.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.9
• /
• pp.829-836
• /
• 2013

The combustion characteristics with variations in synthetic natural gas (SNG) compositions were studied in a lab-scale combustor. The objective of the current study is to investigate the flame stabilization, flame structure, and spectrometry in a non-premixed SNG flame with varying fuel compositions. For the analysis of light emission in SNG flames, we used a spectrometer. As experimental conditions, the fuel jet velocity at the nozzle exit $u_F$ was varied from 5 to 40 m/s and the coaxial air velocity $u_A$ was varies from 0 to 0.43 m/s. The experiments showed that the flame stability increased with the hydrogen component in SNG.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.502-502
• /
• 2011

기존 연구에서는 단일 타겟으로부터 증착된 코팅층 내에 다상으로 이루어진 나노 복합구조를 형성하기 위하여, 나노 합금분말을 방전플라즈마 소결법 등으로 급속 소결하여 타겟을 제조하는 방법이 고려되어 왔다. 반면, 비정질 재료가 우수한 비정질 형성능을 가지는 경우 주조 방법에 의해서도 타겟 제조가 가능하며, 특히 최근 들어 금속 비정질 합금에서 합금의 주요 구성 원소들이 양의 혼합열을 가지는 경우, 액상 또는 과냉각 액상에서 상분리 현상이 발생한다는 것이 밝혀졌다. 이러한 사실에 기초하면, 우수한 비정질 형성능을 가지는 합금 시스템에 합금 구성 원소와 양의 혼합열 관계를 갖는 원소를 첨가함으로써, 비정질 기지 내에 화학적 불균일성을 유도하여 다상으로 이루어진 복합 구조를 형성시키는 것이 가능하다. 본 연구에서는 이러한 합금 설계법을 이용하여, 비정질 기지 내에 존재할 수 있는 불균일성 정도를 합금 조성과 주조 조건의 변화를 통하여 나노 크기에서 원자 크기까지 조절하고, 이에 따른 재료 특성과의 상관관계를 밝히고자 하였다. 이를 위하여 우수한 비정질 형성능을 가지는 Cu-(Zr, Hf)-Al 벌크 비정질 합금계에서 (Zr, Hf)과 (Y, Gd)간의 양의 혼합열 관계에 주목하여 Cu-(Zr, Hf)-(Y, Gd)-Al 벌크 비정질 형성 합금계를 설계하였으며, 이 합금계 내에서 조성과 냉각속도의 조절에 따라 나타나는 불균일성의 정도와 특성변화의 영향을 체계적으로 고찰하였다. 결과로서, Cu-(Zr, Hf)-Al 합금계에서 (Zr, Hf)을 (Y, Gd)으로 15 at.% 이상 치환한 경우, Cu-(Zr, Hf)-rich 와 Cu-(Y, Gd)-rich 비정질상으로 이상분리가 일어났으며, 이렇게 생성된 비정질-비정질 복합재는 응력 하에서 소성 변형을 거의 보이지 않았다. 반면, 5 at.% 이하로 (Zr, Hf)을 (Y, Gd)으로 치환한 경우에는 비정질 기지에 SAXS 혹은 WAXS로 확인 가능한 원자 크기의 불균일성이 나타났으며, 이 경우 비정질 합금의 점성 유동의 변화를 통해 합금의 연신 특성이 향상되었다. 특히, 본 연구에서는 비정질 기지내 불균일 제어를 통한 기계적 특성 향상을 위해서 조성 제어뿐 아니라 동역학적인 요소를 고려한 냉각속도 조절을 통한 원자단위 불균일성의 최적화가 필요함을 규명하였다. 이러한 연구 결과는 분말화 및 소결 과정을 배제하고 제조된 단일 타겟을 통해 코팅층에 다수의 합금원소를 혼합하고 나노/원자 스케일의 복합구조 형성 및 고집적화가 가능한, 타겟 모물질 설계의 새로운 방향을 제시함으로써 다기능성 복합소재 코팅층의 연구에 크게 기여할 것으로 사료된다.

• Korean Journal of Materials Research
• /
• v.7 no.1
• /
• pp.21-26
• /
• 1997

고주파 마그네트론 반응성 스퍼터링(rf magnetron reactive sputtering)으로 티타늄산화물 박막을 제조하여 산소비율에 따른 반응성 스퍼터링의 증착기구를 조사하고 산소비율 및 기판온도에 따른 산화물 조성의 변화, 미세조직, 광학적 특성의 변화를 연구하였다. 기존의 진공기상증착법으로 증착만 박막에 비해, 금속타겟을 사용하여 높은 증착속도를 얻을 수 있는 반응성 마그네트론 스퍼터링으로 성막한 티타늄산화물 박막은 치밀도가 우수하여 높은 굴절률(2.06)과 높은 광투과율을 보였다. 상온에서 성막된 티타늄 산화물박막의 경우, 산소비율이 낮은 조건에서는 다결정형의조직을 보였으나 산소비율이 높은 경우에는 비정질조직을 나타냈으며, 기판온도가 30$0^{\circ}C$ 이상에서는 산소비율에 상관없이 다결정형의 조직을 나타냈다. 하지만 산소비율이 임계값이상에서는 박막의 조성, 증착속도 등이 거의 변하지 않는 안정된 증착조건을 보였다. 30% 이상의 산소비율의 반응성 스퍼터링의 조건에서는 TiO$_{2}$의 조성의 박막으로 성장하여 약 3.82-3.87 eV의 band gap을 나타냈으며 기판온도의 증가에 따라 비정질 TiO$_{2}$에서 다결정 TiO$_{2}$으로 조직의 변화를 보여 광투과도도 약간 증가하는 경향을 나타냈다.