• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.12 no.2
• /
• pp.157-157
• /
• 1998

이 논문은 브리시리스 직류전동기의 구동 인버터의 실시간 데이터를 이용한 고장진단에 관한 것이다. 구동 인버터의 고장유형을 파악하여 주요 고장증세별로 분류하고, 고장결과를 예측하여 ASCL로 시뮬레이션함으로써 지식 베이스로 구성하였다. 구동 인버터에 대해 실시간으로 감시된 데이터는 전문가 시스템의 추론기관에서 시뮬레이션된 지식베이스와 비교하게 된다. 고장이 발생하면, 운전을 중지시킨 후, 전문가 추론을 함으로써 고장원인을 진단한다. 이로써 구동 인버터에 대해 전문적인 지식을 갖고 있지 않는 사용자에게, 고장원인 제거 및 수리대책에 관한 전문가의 지식을 신속히 제공하는 것이다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.4
• /
• pp.81-86
• /
• 2003

Using DG for peak-shaving unit could reduce the overall system operating cost, and using DG for standby power unit could improve the reliability of the distribution system The models of peak-shaving unit and standby power unit are different from each other. The Monte-Carlo simulation is suitable for the purpose of the analysis of two DG models. In this paper, the reliability indices are calculated from the time-sequential method, and the merit and defect of the peak-shaving unit and standby power unit are investigated.

• 한국디지털정책학회:학술대회논문집
• /
• 2005.11a
• /
• pp.581-593
• /
• 2005

최근 기술 중 국방, 교육, 오락 등 다양한 산업 분야의 핵심 기술로 부상하고 있는 "모델링 및 시뮬레이션 (M&S: Modeling & Simulation)"에 관한 기술 연구와 어플리케이션 개발이 활발하게 이루어지고 있다. 특히 e-Learning 산업분야와 관련하여 가상현실 또는 가상 시뮬레이션 기술로 대표되는 가상 시뮬레이터 교육 구현 기술에 관하여 집중적으로 조명되고 있다. 그러나 이를 만족시킬 수 있는 가상 시뮬레이션 기술에 공통으로 적용할 수 있는 표준 기술은 현재 매우 부족한 상태이다. 따라서 본 논문에서는 e-Learning 분야의 학습효과를 증대하기 위한 목적으로 가상 시뮬레이션 데이터 요소, 즉 이와 관련된 기재 사항들의 기재 방식에 관한 표준 기술을 정의하고, 이를 표준 요소들로 제안한다.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.7
• /
• pp.1-5
• /
• 2006

Fixed lighting of public ways for both drivers and pedestrians can create a nighttime environment in which people can see comfortably and can quickly and accurately identify objects on the roadway being travelled. Roadway lighting can improve traffic safety, achieve efficient traffic movement and promote the general use of the facility during darkness. The design of a roadway lighting system involves consideration of visibility, economics, esthetics, safety and environmental conditions. This paper shows estimation of horizontal illuminance and uniformity ratio by actual measurement of roadway lighting at main streets in Jejusi and evaluation of Jejusi roadway lighting conditions for modeling by computer simulation.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.83-88
• /
• 2003

This paper analyses a fault operation due to the effect of miller capacitance, which severely influences the performance of the IPMs based on computer-aided simulations, and also it presents a good solution to solve that problem. A miller capacitance existed between gate and collect is very closely related to the stray capacitance formed between gate and emitter, and the value of gate resistor. These relationships are proved by the computer-aided simulation. Based on the PSpice simulation results, a customized IPM employing an auxiliary circuit is presented to minimize a fault operation. And it is compared to the standard IPM by the experimental waveform. As a result, it is verified that a customized IPM has a voltage margin to prevent a fault operation approx. 3 [V].

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.4
• /
• pp.8-14
• /
• 2004

In this paper, We designed the electronic ballast power factor corrected(PFC) circuity for an 400[W] hight pressure soldium lamp using boost-converter. The values of PFC elements in the proposed boost-converter circuit are calculated theoretically and performed simulation using IsSPICE. We also implemented the ballast for high pressure sodium lamp and experiments. We found that the experimental characteristics of implemented PFC circuit were same with those of simulation results. The experimental results show the performance as PF 90.3[%] at output 400(W).

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.13 no.5
• /
• pp.371-383
• /
• 2011

It is important to secure illumination for the driver's safety because the tunnel is a space for changing brightness quickly, and lighting fixtures of the tunnel have consumed a lot of electric lighting energy for operating in both the daytime and at night. This study aims to evaluate daylighting performance of Mirror Reflector System for luminous environment improvement of tunnel space by using RADIANCE simulation program. The results of simulation show that illuminance of bar type is higher than illuminance of pole type at 20 m from the tunnel entrance.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.5
• /
• pp.70-76
• /
• 2010

It is required to analyze the characteristics of inverter-fed induction motor according to the increase of inverter uses. However the previous simulation researches usually uses simplified induction motor model and fixed power source because the difficulties of their modeling and analysis. In this study, high frequency induction motor is simulated and the induction motor model considering high frequency characteristics is developed and it is combined with inverter model. With these, from the sinusoidal commercial frequency to PWM high frequency, induction motor characteristics can be simulated and analyzed.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.8
• /
• pp.26-30
• /
• 2008

The simulation and experiment for the fault current limiting characteristics of the superconducting fault current limiter (SFCL) using the magnetic coupling of series connected two coils were performed. The magnetic fluxes generated from two coils were canceled out during a normal time. However, the resistance generation of high-Tc superconducting (HTSC) element after a fault occurrence allows the magnetic fluxes of two coils and contributes to the fault current limiting operation. Through the computer simulation and the current limiting experiment for this SFCL, the operational current and the limiting impedance of the SFCL could be confirmed to be improved by adjusting the inductance ratio of two coils.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.70-78
• /
• 2008

This paper deals with the simulation modeling of PV generation system for its application to utility distribution network PSCAD/EMIDC simulation model is developed for use in studying the effect of the PV generation to the distribution system. Simulation results show that the addition of the PV system improves the voltage profile of the area by decreasing the power flow from the utility substation. Case studies also show that power quality at the load side is also improved via voltage compensation at the load bus.