• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.26 no.1
• /
• pp.48-56
• /
• 2012

• Korean Journal of Optics and Photonics
• /
• v.24 no.1
• /
• pp.29-38
• /
• 2013

In this paper, the illumination performances of three freeform lenses optimally designed for a point source were investigated for several LEDs with different source sizes, and also the tolerance characteristics of the lenses were analyzed. For comparison, two lenses with different sizes were designed with a divergent illumination model, and the last one was done with an overlapped illumination model. As the LED source size increased, the illuminance uniformity decreased more strongly, and the influence of a source misalignment on illumination performance became insignificant. However, the variation of LED radiation characteristics had strong effect on the illumination performance, irrespective of LED source size. Even though the lens based on a divergent illumination model showed superior performance compared to the lens based on an overlapped illumination model, the latter was less sensitive to the variation of LED radiation characteristics.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1497-1498
• /
• 2008

LED 조명기구의 최적 배광제어를 위한 방법으로 Reflector 와 Lens를 설계하여 빛을 제어한다. 그러나 Lens설계는 제작의 어려움과 광효율의 감소로 인하여 2차적으로 사용되는 방법이다. 이를 해결하기 위하여 본 논문에서는 Reflector를 이용한 배광 설계를 최적화하여 경제적인 제작이 가능 하도록 Photopia2.0을 이용하여 설계하였다. LED 각각의 개별 반사판과 모듈 전체 적용된 반사판을 적용하여 각 형태별 특징을 도출하였다.

• Proceedings of the Speleological Society Conference
• /
• 1996.09a
• /
• pp.84-84
• /
• 1996

동굴의 전기 시설은 전문가에 의하여 작성된 동굴 도면과 지형지물의 철저한 조사에 의한 전기 시설의 설계가 이루어진 후에 전기공사업 자격자에 의하여 시공되고, 설계자 또는 감리기관에 의하여 시공의 감독이 이루어져야 한다. 다음으로 시설 후의 관리, 유지, 보수가 더욱 중요한 것으로 조명등의 전구 교체라든가 등기구 교체시 설계 도면에 의거하여 설계자의 의도를 벗어나서는 안될 것이며, 기본 도면에 의한 보수공사 또는 재설계가 이루어진 후에 설계에 의한 보수공사가 시행되는 것이 일반적인 상식임이다.(중략)

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2003.11a
• /
• pp.15-18
• /
• 2003

무전극 형광램프는 발광하는 부분의 사이즈가 크고 광원의 특성상 점광원으로 볼 수 없기 때문에 효율적인 광학기구를 설계하기 어렵다. 특히 반사판 설계시 반사광이 램프로 재흡수 되는 것을 고려하여야 한다. 본 논문은 무전극 형광램프에 대하여 반사광이 램프로 재흡수 되는 것을 막고 효율을 높이며 목표배광에 맞출 수 있는 2차원 축대칭형 반사판 설계법을 제시하였다. 그리고 이 설계법의 문제점과 해결방법에 대하여 고찰하였다.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.3
• /
• pp.42-50
• /
• 2002

In this paper, we have designed and implemented lamp control system in underground parking place using WWW. The proposed system consists of lamp control system which is connected by RS-485 communication bus and monitoring system (WebPL) which can provide web interface using the web server. The lamp control system is controlled through a user command within the monitoring system (WebPL), senses moving object and turns lamps in underground parking place on or off. The monitoring system displays the status values of on or off received from lamp control system on the web browser and can real-timely control lamps in underground parking place on the web browser. 

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.1
• /
• pp.145-152
• /
• 2016

The usage of LED(Light Emitting Diode) has been rapidly increased and energy efficient management of LED light system is regarded as an important technology to enhance the energy efficiency. In this paper, we design and implementation of LED lighting controller which can control the LED lighting by using the wire and wireless communication technology based on the LAN(Local Area Network) and PAN(Personal Area Network). The implemented system can reduce the cost of LED lighting installing and avoids complicated wiring problem. And it is possible to minimize power consumption through automatic or manual LED control that they wished. In experimental results, the implemented LED lighting controller was satisfactory for all of the desired functions.

• Korean Journal of Optics and Photonics
• /
• v.35 no.1
• /
• pp.18-23
• /
• 2024

In exhibition spaces such as art museums, lighting should primarily illuminate the walls where exhibits are displayed rather than the floor. Commonly used LED lighting consists of an LED and a diffusion plate that closely resembles a Lambertian light source with uniform light distribution at every angle. This type of illumination focuses on the floor surface where normal incidence occurs. Consequently, this general illumination method is not well-suited for effectively lighting the wall surface. Specifically, to illuminate a wall, it is necessary to increase the light intensity in areas with a large incident angle in the light distribution. In response to this issue, our study proposes an illumination system that uses an ultra wide converter to adjust the divergence angle from the light source to 180 degrees.

• The Journal of the Korea Contents Association
• /
• v.13 no.12
• /
• pp.19-26
• /
• 2013

In this paper, we present a novel illumination system for parking lots constructed underground. We design and implement this system using microwave sensors and dimming control of LED fluorescent lamps so that we can obtain lighting efficiency of the illumination scheme. We construct an effective illumination system in the aspects of performance and cost, resulting in energy-saving and electricity reduction. Recently conventional energy-saving method applied to old underground parking lots mainly relies upon turning off the half of total number of lamps installed in the parking lot. Sometimes there are some lots that have infrared sensor to be used to turn on/off the fluorescent lamps to realize these operations smoothing. The other schemes utilize timer to control lighting time of the fluorescent lamps. These conventional schemes are forcing to turn off a part of lamps installed so that we cannot apply them in a systematic way. Moreover they will be most inefficient when we leave them alone to be continuous consumers. The lighting control system proposed in this paper can recognize objects through microwave sensors and inform the appropriate lighting time, furthermore we can adjust brightness of LED lamps following the surroundings using dimming control scheme so that we can epochally improve the illumination system for underground parking lots. According to our sophisticated test experiments, we can maximally obtain 81.9% of energy-saving effectiveness using the system proposed in this paper.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.10 no.3
• /
• pp.47-54
• /
• 1996

In this paper, the band pass filter was designed and constructed for personal communication services of information facilities. For the band pass filter design, after dielectric resonator structures were analyzed. J-inverter design theory and its simulation method were studied. The parameters obtained from design theory were practically applied to filter construction. The simulation results are well agreed with the measured result of constructed filter after fine tunings.