• Tunnel and Underground Space
• /
• v.25 no.4
• /
• pp.320-331
• /
• 2015

This paper presents a case study of an enhanced geothermal system(EGS) demonstration project conducted in $Gro{\ss}$ $Sch{\ddot{o}}nebeck$, Northerm Germany, focusing on hydraulic stimulation. The project was conducted with doublet system in sandstone and volcanic formations at 4 - 4.4 km depth. Under normal faulting to strike-slip faulting stress regime, hydraulic stimulations were conducted at injection and production wells by massive waterfrac and gel-proppant fracturing. Injectivity index increased from $0.97m^3/(hr^*MPa)$ to $7.5m^3/(hr^*MPa)$ and productivity index increased from $2.4m^3/(hr^*MPa)$ to $10.1m^3/(hr^*MPa)$ by a series of hydraulic stimulations at both wells. After circulation tests through injection and production wells, however, productivity index decreased from $8.9m^3/(hr^*MPa)$ to $0.6m^3/(hr^*MPa)$ in two years. Slip tendency analysis for the stimulation in volcanic layer estimated the required pressure for shear slip and its preferred orientations and it showed reasonable match with actual stimulation results. Through the microseismicity observation for the stimulation of volcanic formation, only 80 seismic events with its moment magnitudes in -1.8<$M_W$<-1.0 were observed, which are unexpectedly low for EGS hydraulic stimulation.

• Microbiology and Biotechnology Letters
• /
• v.33 no.1
• /
• pp.29-34
• /
• 2005

Lipase-producing bacteria (S3) were isolated from intertidal flat at Saemanguem. A isolated strain was identified as Psychrobacter species by physiological and fermentational characterization as well as 16S rRNA analysis. The strain was then named as Psychrobacter sp. S3. P. sp. S3 grew most rapidly at $30^{\circ}C$, but grew well even at $10^{\circ}C$ and its lipase activity was most high when cultivated at $20^{\circ}C$. Lipase S3 had optimum temperature of $30^{\circ}C$ for the hydrolysis of p-nitrophenyl caproate and had more than $80^{\circ}C$ activity even at $10^{\circ}C$. The activation energy was calculated to be 1.5 kcal/mol, which showed that it was a typical cold-adapted enzyme. It was an alkaline enzyme with optimum pH of $9.0\~9.5$. It could hydrolyze various length of triglycerides. Among them, it hydrolyzed most rapidly $C_4,\;C_{14},\; C_{16}-length$ triglycerides. When added to tributyrin-agarose gel, lipase S3 hydrolyzed tributyrin most rapidly at 30 and $40^{\circ}C$, but it could hydrolyze well even at $4^{\circ}C$.

• Journal of Applied Biological Chemistry
• /
• v.56 no.2
• /
• pp.95-100
• /
• 2013

Soil microbes are important integral components of soil ecosystem which have significant and diverse role in organic matter decomposition, nitrogen cycling, and nitrogen fixation. In this study an effective denaturing gradient gel electrophoresis (DGGE) method was employed for paddy soil microbial diversity survey. For optimum paddy soil microbial DNA extraction, different methods such as Lysis buffer, skim milk bead, sodium phosphate buffer, Epicentre Soil Master DNA extraction kit (Epicentre, USA) and Mo Bio Power Soil DNA kit (MO BIO, USA) methods were utilized. Among all the method, using Mo Bio Power Soil kit was most effective. DGGE analysis of Bacteria was carried out at 6% polyacylamide gel and 45-60% denaturing gradient in the optimal conditions. Whereas DGGE analysis of fungi was done at 6% polyacrylamide gel and 45-80% denaturing gradient in the optimal conditions. By applying the above assay, it was found that variation within the microbial community of paddy soil occurs by a factor of time. DGGE assay used in this study through for a variety of soil microbial analysis suggests the potential use of this method.

• Journal of radiological science and technology
• /
• v.32 no.1
• /
• pp.61-67
• /
• 2009

Purpose : The purpose of this study was to investigate the applicability of poly-L-guluronic alginate (PGA) gel in vascular embolization with angiography simulation. Materials and Methods : To prepare a gel-forming PGA from no guluronate-rich Laminaria japonica, a new acid hydrolysis method was employed with a lower HCL concentration (0.03 M) and a shorter treatment time (5 min). The obtained PGAs were selected based on gel stability and viscosity. Glass aneurysm model was used to simulate gel embolization in vitro. Then, finally, the PGA was used to embolize the renal vascular system by using a rabbit model and angiography. Results : Glass aneurysm model was made to simulate gel embolization procedure. PGA solution was injected from pump through 2-way catheter. Subsequent injection of $CaCl_2$ successfully formed gels inside aneurysm model that conforming to its inner contour. In rabbit model, first, renal artery and aorta leading to the right kidney were ligated to block blood flow, then conventional contrast agent was injected through aorta to check the arterial patency to the left kidney. In sequential artery injection method, PGA and $CaCl_2$ were injected through renal artery sequentially via a single catheter. Re-injection of contrast agent after removing ligated aorta showed blood flow to the right kidney but no flow in the left kidney. This result demonstrated a complete blocking of blood flow due to gel formation in vascular bed of the left kidney. Conclusion : Instillation of calcium alginate into aneurysm model and arterial system in vivo produced an embolization that better fills and conforms to the contour of aneurysms or blocking vascular bed completely. Therefore, PGA was effective endovascular occlusion materials and provide an efficiency of vascular angiography.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.259-265
• /
• 2006

Small intestinal submucosa (SIS) consists of some growth factors which can stimulate cell activity, and PVA has been widely utilized in the area of wound dressing as hydrogel which is easy to be removed from wounds. In this study, native SIS sheets were coated with PVA by immersing them into 2, 4, and 10 wt% of PVA solution and then lyophilized on two type of molds to endow the prepared wound dressing with easy removal property from wounds. The mechanical properties were examined through tensile test. Moreover, enzymatic degradation, water uptake, and in vitro test were carried out to characterize the prepared SIS sheets. The tensile strength of the SIS sheets coated with PVA (PVA-SIS) were decreased, whereas the elongation were increased. Degradation ratio of the PVA-SIS sheets was decreased compare to native SIS. Water uptake ability was improved at 2 and 4 wt% of PVA. The degree of fibroblast attachment was lower than the native SIS sheets. In conclusion, this study suggests that the PVA coated SIS sheets have a potential for the applications of wound dressing and biodegradable injectable materials.

• Polymer(Korea)
• /
• v.36 no.3
• /
• pp.344-350
• /
• 2012

New pressure sensitive adhesives (PSAs) for polarizer film were prepared by electron beam (e-beam) radiation to acrylic copolymers, and their adhesive properties were investigated. The acrylic copolymers were synthesized by free radical polymerization of $n$-butylacrylate (BA), 2-hydroxyethyl methacrylate (HEMA), and acrylic acid (AA). The acrylic copolymers were coated on PET release films to a thickness of 25 ${\mu}m$, laminated to polarizer films, and then radiated with e-beam at room temperature. Gel fractions of all the acrylic copolymers after e-beam radiation at 50 kGy were higher than 93%, and their crosslinking densities were increased with increasing the content of HEMA units. PSA prepared by e-beam radiation of acrylic copolymer synthesized with a feed ratio of BA/HEMA/AA = 89.5/10/0.5 (w/w/w) at a dose of 50 kGy exhibited the best adhesion performances in terms of peel strength, creep resistance, durability and reliability, and light leakage. It is expected that the preparation method of PSAs via e-beam irradiation will improve the producibility and workability of polarizer film for liquid crystal display.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.459-463
• /
• 2010

Amphotericin B (AmB) is anti-fungal agent for the treatment of systemic fungal infections, but its poor solubility has limited clinical applications. In this study, a new gel formulation made up of L-arginine as solubilizer, thermosensitive Poloxamer 407 (P 407), and adhesive carbopol was designed for effective solubilization and delivery of AmB. The aqueous solubility of AmB was enhanced up to 2.6 mg/mL by addition of L-arginine. Aqueous P 407 solutions of more than 20% w/v showed thermo-induced sol-gel-sol phase transition. The phase transition behavior was affected by the presence of AmB and L-arginine, and the phase transition range was broadened by addition of carbopol. In vitro drug release was improved by the solubilizing effect of L-arginine, and the presence of mucoadhesive carbopol prolonged the release rate as a function of concentration.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.5
• /
• pp.659-666
• /
• 1995

Fucoidans were isolated from Hizikia fusiformis and Sargassum fulvellum and characterized on their chemical properties. Crude fucoidans were extracted at $65^{\circ}C$ for 1hr with acid solution of pH 2.0, and cetylpyridinum chloride was used for partial purification. The yields of partially purified fucoidans were $2.51\%$ for H. fusiformis, and $65\%$ for S. fulvellum, respectively. The partially purified fucoidans were separated into 3 fractions by DEAE-Sephadex A-25 ion exchange column chromatography and the major fractions were refractionated with fractional preripitation with ethanol. $60-70\%$ ethanol precipitated fraction(P-70) of H. fusiformis and $60-65\%$ ethanol precipitated fraction(P-65) of S. fulvellum turned out to be homogeneous by cellulose acetate electrophoresis and gel filtration chromatography. The molar ratios of fucose, galactose, and sulfate In the purified fucoidans were 1 : 0.66 2.74 for H. fusiformis and 1 : 0.24. 1.46 for 5. fulvellum. The averaged molecular weights of the purified fucoidans from H. fusiformis and S. fulvellum were 26,000 and 105,000, respectively.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.4
• /
• pp.662-670
• /
• 2008

The purpose of this in vitro study was to evaluate the effect of fluoride containing adhesive film on prevention of enamel demineralization. Eighty bovine enamel blocks were divided randomly into 4 groups of 25: (1) APF gel applied ; (2) CavityShield$^{TM}$ applied; (3) 3% fluoride film applied; (4) 5% fluoride film applied; Early caries lesions were produced by placing each specimen into demineralization solution at pH 4.0 for 72 hours. Then lesion of the surface microhardness were measured by the Vicke's hardness test and the lesions depth were measured by polarizing light microscope. The results of the present study are as follows: 1. Difference of microhardness value ($M{\pm}SD$) between control and experimental side was the highest in group II, followed by group IV, III, I but, no significant difference was between group II, III and IV. 2. Difference of mean lesion depth ($M{\pm}SD$) between control and experimental side was the highest in group II, followed by group III, IV and I but no significant difference was between group III and IV. The results of the present study indicate that the fluoride film application is more effective than APF gel and is similar to fluoride varnish application for prevention of dental caries.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.369-378
• /
• 2017

Vascular endotherial growth factor (VEGF) is a potent mitogen that stimulates vascular permeability and angiogenesis and has a potential in therapeutic applications. An industrial production method that provides high yield as well as purity is needed. Researches for various factors of mild solubilization with combination of ubiquitin fusion protein to increase solubility were carried out as well as by changing pH and denaturant concentration. Usage of pET28-a bacteral expression vector in BL21 (DE3) host cell was capable of producing approximately 14 g/L VEGF fusion protein in 20L fermentor. A purification process consisting of four chromatography steps including refolding and digestion with UBP1 resulted in mild solublization under the conditions of 2M urea and pH 10.0 due to ubiquitin fusion tag protein that increases in solubility of target protein VEGF. High yield of refolding and dimerization could be obtained between two step Ni-affinity chromatography. Multimeric and misfolded proteins and endotoxin were removed by DEAE anion exchange chromatography. Final monomers were removed from dimers by gel filtration chromatography. Characterization analysis of purified dimeric VEGF was performed using SDS-PAGE and RP-HPLC with a purity of 97%.