• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.367-375
• /
• 1986

On the hypothesis that the unstable intermediates yield by the pre-reaction of auxiliary fuel become an initiator or an explosive center which promotes the chain reaction of main fuel, various organic compounds below $C_{10}$ are injected as an auxiliary fuel prior to main injection. In the previous papers, the effects of the auxiliary fuel additions on the ignition delay period, the stability of flame, the NO concentrations in their exhaust gases have been investigated. In the present paper, to confirm where the most suitable location of lean pre-mixture for the combustion of main fuel is, and how the lean pre-mixture is contacted with main fuel, the effects of the injection timing of auxiliary fuel and the turbulence on combustion processes are investigated. Moreover, from the schlieren and color photographs of flame in the combution field, it could be found that the ignition nuclei are formed in a wider region of main spray, and that these ignition nuclei promote the development of flame, which results in the reduction of flaming duration.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.4
• /
• pp.567-573
• /
• 2003

Surimi yields from acid and alkaline processing of 5 fishes were compared to those from conventional processing Effect of sarcoplasmic protein and NaCl on heating gel from acid and alkaline surimi were also investigated by punch test and color. Yield of alkaline surimi was higher than that of conventional surimi. However, the breaking force, deformation and whiteness of heating gel from alkaline surimi were lower than those of heating gel from conventional surimi. The sarcoplasmic protein increased a breaking force and a deformation of gel. A breaking force was decreased, but deformation not significantly with NaCl concentration. Myosin heavy chain (MHC) and actin were greatly degraded in acid processing. Alkaline process for surimi is a valuable way of increasing the utilization of frozen and pelagic fishes, and making kamaboko-type products.

• Journal of Periodontal and Implant Science
• /
• v.38 no.4
• /
• pp.621-628
• /
• 2008

Purpose: Osteopontin is one of the major non-collagenous protein of hard tissue. Use of peptide domain of biologically active protein has some advantages. The objective of this experimental study is evaluation of periodontal regenerative potency of synthetic peptide gel which containing collagen binding domain of osteopontin in the degree III periodontal defect of beagle dogs. Material and Methods: Experimental degree III furcation defect was made in the mandibular third and fourth premolar of beagles. Regenerative material was applied during flap operation. 8 weeks after regenerative surgery, all animals were sacrificed and histomorphometric measurement was performed to calculate the linear percentage of the new cementum formation and the volume percentage of new bone formation. Result: The linear percent of new cementum formation was 41.6% at control group and 67.1% at test group and there was statistically significant difference. The volume percent of new bone formation was 52.1% at control group and 58.9% at test group. Conclusion: As the results of present experiment, synthetic peptide gel containing collagen binding domain of osteopontin significantly increase new bone and cementum formation in the degree III furcation defect of canine mandible.

• Particle and aerosol research
• /
• v.6 no.2
• /
• pp.51-59
• /
• 2010

ZnO quantum dots embedded in a silica matrix without agglomeration were synthesized from $TEOS:Zn(NO_3)_2$ solutions in one-step process by aerosol-gel method. It was successfully demonstrated that the size of ZnO Q-dots could be controlled from 2 to 7 mm verified by a high resolution transmission electron microscope observation. The line scanning energy dispersive X-ray spectroscopy(EDS) revealed that the Q-dots existed preferentially inside SiO2 sphere when Zn/Si < 0.5. However, the Q-dots distributed homogeneously all over the sphere when Zn/Si > 1.0. Blue-shifted UV/Vis absorption peak observation confirmed the quantum size effect on the optical properties. The photoluminescence(PL) emission peaks of the powders at room temperature were consistent with previous reports in the following aspects: 1) PL characteristics are dominated by two peaks of deep-level defect-related emissions at 2.4 - 2.8 eV, 2) the first defect-related peak at 2.4 eV was blue shifted due to the quantum size effect with decreasing the concentration of $Zn(NO_3)_2$(decreasing the size of ZnO q dots). More interestingly, the existence of surface-exposed ZnO q dots affects greatly the second defect PL peak at 2.8 eV.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.5
• /
• pp.241-246
• /
• 2003

The transparent conducting thin film of ATO (antimony-doped tin oxide) was successfully fabricated on$SiO_2$/glass substrate by a sol-gel dip coating method. The crystalline phase of the ATO thin film was identified as SnO$_2$ major phase and the film thickness was about 100 nm/layer at the withdrawal speed of 50 mm/minute. Optical transmittance and electrical resistivity of the 400 nm-thick ATO thin film which was annealed under nitrogen atmosphere were 84% and $5.0\times 10^{-3}\Omega \textrm{cm}$, respectively. It was found that the $SiO_2$ layer inhibited Na ion diffusion and the formation of impurities like $Na_2SnO_3$ or SnO while increasing Sb ion concentration and higher ratio of $Sb^{5+}/Sb^{3+}$in the film. Annealing at nitrogen atmosphere leads to the reduction of $Sn^{4+}$ as well as $Sb^{5+}$ resulting in decrease of the electrical resistivity of the film.

• Applied Chemistry for Engineering
• /
• v.9 no.1
• /
• pp.6-12
• /
• 1998

A FET(Field Effect Transistor) type dissolved $CO_2$ sensor based on Severinghaus type $CO_2$ sensor was fabricated by the photolithographic process. The sensor consists of Ag/AgCl reference electrode and membranes (hydrogel membrane and $CO_2$ gas permeable membrane) on the pH-ISFET base chip. Ag/AgCl reference electrode was fabricated as follows. Ag layer was thermally evaporated and then its upper surface was chemically chloridized into the AgCl. The hydrogel used as an internal electrolyte solution was fabricated by a photolithographic method using 2-hydroxyethyl methacrylate(HEMA) and acrylamide. $CO_2$ permeable membrane on the top of the hydrogel layer was formed by photolithographic process with UV-oligomer. The FET type $pCO_2$ sensor fabricated by photolithographic method showed good linearity within the concentration range of $10^{-3}{\sim}10^0mole/{\ell}$ of dissolved $CO_2$ in aqueous solution with high sensitivity.

• Archives of Plastic Surgery
• /
• v.37 no.3
• /
• pp.256-258
• /
• 2010

Purpose: Predicting the change in breast size for a specific patient's need is a challenging problem in breast augmentation. We intended to investigate the postaugmentation degree of breast size according to the size of cohesive silicone gel implant. Methods: To predict post-augmentation breast size, we measured 100 patients' pre-and postoperative 3 month's bust circumference. All patients were performed by total subfascial breast augmentation with moderate profile cohesive silicone gel implant through areolar omega (transareolar-perinipple) incision. Results: According to this study, each additional one pair of 100 mL in implant size yielded an approximate 1.5 cm increase in bust circumference (p=0.006). Conclusion: From this result, we conclude that each additional one pair of 100 mL in implant volume yielded about 1.5 cm increase in bust circumference. Although this result may not be applied to every patient, we believe that it yields a practical chart that can help to predict the amount of increase in breast size with the use of cohesive silicone gel implant of a specific size preoperatively.

• Parasites, Hosts and Diseases
• /
• v.30 no.3
• /
• pp.227-230
• /
• 1992

Spirometra mansoni plerocercoid (sparganum) was incubated in saline at $4^{\circ}C{\;}or{\;}37^{\circ}C$ up to 100 hours. Protein contests in the excretory$.$secretory product (ESP) were rather constant (mean 7.7 mg of protein/gram of sparganum) in the preparations. Reducing SDS-PAGE of ESP showed similar protein subunit compositions with those in crude extract. Antigenic 36 and 31 kDa Proteins were major bands in ESP. ESP exhibited specific activities of protease(2.9~5.3 units/mg) at pH 6.0 and pH 7.5. Presence of protease activity in ESP may be a supporting evidence that hitherto known cysteiRe protease of sparganum is possibly secreted.

• Parasites, Hosts and Diseases
• /
• v.31 no.3
• /
• pp.277-284
• /
• 1993

Leishmaniasis is one of the important tropical diseases in the world. Although it is not prevalent In Korea, imported cases have been recorded. The karyotype of Leishmcnic sp. has been observed to be variable by localities or by strains, but the karyotype of a strain is known to be stable. This study was performed to observe if the karyotype of a Leishmonio sp. would be changed under some stressful conditions. The karyotype, analyzed by pulsed Held gradient gel electrophoresis, was not grossly changed by heat shock, chemotherapeutics, UV illumination, and gamma irradiation. Radiation destroyed the chromosomes mechanically but subcultured organisms after irradiation showed unaffected karyotype. The present findings suggest that the karyotype of a Leishmnnia strain is so stable that it is not altered by temporary stimulation with heat, drugs, and radiation.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.216-220
• /
• 2005

A new type of polymer gel electrolyte was prepared from poly(ethylene glycol) diacrylate(PEGDA) and 1-butyl-3-methylimidazolium bis((trifluorornethyl) sulfonyl) amide$(BuMeIm^+Tf_2N^-)$ ionic liquid. The effect of the ionic liquid on ionic conductivity of the gel polymer electrolyte was investigated. It was observed that the gel polymer electrolyte having the ionic liquid exhibited higher ionic conductivity $(ca.\;10^{-3}S/cm)$ as well as electrochemical stability than that using organic solvent.