• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.104-104
• /
• 2017

유럽의 폐차 처리 지침, RoHs 및 국내 친환경 소재 부품의 개발이 날로 가속화 되면서 종래 사용해 오던 인산염 피막 등 중금속이 함유된 코팅 재료는 점차 친환경 코팅 용액으로 전환이 되었다. 최근 자동차 산업 등에서 종래 중금속인 $Cr^{+6}$을 함유하지 않는 다양한 코팅 용액이 상용화 되고 있다. 그 중 가장 효율적으로 적용되고 있는 용액이 아연 flake를 첨가하여 희생 양극효과를 가능하게 하여 내식용 코팅 용액으로 상용화 하고 있다. 이 용액에는 내식성을 확보하기 위하여 희생양극이 가능한 소재 인 아연 분말을 첨가하며, 이 분말의 분산성이 소재와 코팅 층의 밀착성, 내식성에 결정적인 영향을 미친다. 특히 산업 현장에서는 아연 분말의 효율적인 분산을 위하여 24시간 이상 교반해야하기 때문에 생산성을 감소시키는 결정적인 요인으로 작용을 한다. 아연 분말의 분산은 용액 내에 첨가하는 각종 첨가제의 종류와 첨가량에 따라 현저하게 분산성이 다르기 때문에 첨가 원소에 대한 연구가 매우 중요하다. 본 연구에서는 서로 다른 이종 합금을 첨가하여 각종 첨가제의 종류 및 첨가량이 분산에 미치는 영향을 조사하였고, 첨가량이 코팅 층의 밀착성 및 내식성에 미치는 영향에 대하여 연구하였다. 분산제 첨가량이 낮을 경우 용액은 두껍게 코팅이 되며 분산 거리가 짧아졌다. 이 경우 코팅 층의 박리가 쉽게 발생하며, 코팅 층이 불균일하였다. 1.7% 첨가량에서 최적분산효과를 얻을 수 있었으며, 1,000시간 이상의 내식성을 확보할 수 있었다. 분산성과 동시에 유동성 확보가 중요하며, 유동성 확보를 위하여 점증제의 첨가량에 대한 변화를 주었다. 최적의 첨가량은 1.5% 이상으로 이 경우 부식 발생시간을 억제할 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.3 no.3
• /
• pp.144-149
• /
• 1971

The sensitive technique of activation analysis is well suited for this study since the elements such as As, Br, and Se in tobaccoes are expected to be high concentration. As, Br, and Hg were determined by Bethge destruction method and subsequent neutron activation analysis. $^{77m}Se$ was also by non-destruction activation analysis. The quantities of the element determined in Korean tobaccoes are given as follows in ppm: As, 0.65 ppm. Hg, 0.74 ppm. Se, 1.18 ppm. Br, 7.1 ppm. From the date given it seems that Korean tobaccoes and foreign tobaccoes contained considerably high concentration of selenium and mercury.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.5 no.2
• /
• pp.133-143
• /
• 2007

This study was performed to evaluate the co- and sequential separation of Tc, Np and U from the simulated multi-component HLW solution by a TBP (tributyl phosphate)-TOA (tri- octyl amine)/NDD $(n-dodecane)-HNO_3$ extraction system. An optimal condition of (30% TBP-0.5% TOA)/NDD-1 M $HNO_3$ was selected by taking account of a prevention of the 3rd phase and effects of concentration of TBP, TOA and nitric acid on the co-extraction of Tc, Np and U. In that condition, the extraction yields were 81% (Tc), 85% (Np), less than 9% (Am and RE elements), about 8% (Pd), and less than 5% (other elements) so that the system developed for the co-extraction of Tc, Np and U was proved to be available. For that, however, more than 99% of Zr was found to be pre-removed. The co-extracted Tc, Np and U were sequentially separated in order of Tc(stripping agent : 5 M $HNO_3$)${\rightarrow}Np$ by reductive stripping (reductive-stripping agent : 0.1 M AHA)${\rightarrow}U$ (stripping agent : 0.01 M $HNO_3$), and then their separation factors were evaluated. At these conditions, 95% of Tc, 98% of Np and 99% of U could be recovered in each step.

• Journal of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.390-393
• /
• 1981

Eight new compounds were prepared by the addition reaction of thioglycolic acid to ${\beta}$-nitrostyrene and its derivatives. s-[2-Nitro-1-phenylethyl]-thioglycolic acid; s-[2-nitro-1-(p-methyl)phenylethyl]-thioglycolic acid; s-[2-nitro-1-(p-methoxy)phenylethyl]-thioglycolic acid; s-[2-nitro-1-(p-chloro)phenylethyl]-thioglycolic acid; s-[2-nitro-1-(p-bromo)phenylethyl]-thioglycolic acid; s-[2-nitro-1-(p-nitro)phenylethyl]-thioglycolic acid; s-[2-nitro-1-(3-methoxy-4-ethoxy)phenylethyl]-thioglycolic acid; s-[2-nitro-1-(3,4,5-trimethoxy)phenylethyl]-thioglycolic acid; The structure of these compound were identified by elemental analysis, UV, IR and NMR spectral data.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.191.1-191.1
• /
• 2015

최근에 백색 발광다이오드를 개발하기 위한 고효율의 형광체 개발에 많은 연구가 집중되고 있다. 본 연구에서는 $La_2WO_6$ 모체 결정에 다양한 활성제 이온인 $Eu^{3+}$, $Dy^{3+}$, $Sm^{3+}$, $Tb^{3+}$를 각각 도핑하여 다양한 발광 파장을 갖는 고효율의 형광체를 제조하였다. 합성한 형광체 분말은 초기물질 $La_2O_3$, $WO_3$, 희토류 원소 ($Eu_2O_3$, $Dy_2O_3$, $Sm_2O_3$, $Tb_4O_7$)를 각각 화학양론적으로 준비하여 고상반응법으로 제조하였으며, 이때 하소 공정은 $400^{\circ}C$에서 3시간, 소결 공정은 $1050^{\circ}C$에서 5시간 유지하여 합성하였다. $La_2WO_6:Eu^{3+}$ 형광체 분말의 경우에 320, 395, 465 nm에서 강한 흡광 파장이 발생하였으며, 파장 320 nm로 여기 시켰을 때 최대 발광 세기는 618 nm에서 관측되었다. $Sm^{3+}$을 도핑한 형광체의 흡광 스펙트럼은 310, 375, 406, 475 nm에서 발생하였으며, 310 nm로 여기 시켰을 때 602 nm의 강한 주황색 발광 신호가 나타났다. $Dy^{3+}$가 도핑된 $La_2WO_6$ 형광체는 575 nm에 강한 발광 피크를 갖는 황색을 나타내었으며, 흡광 파장은 313 nm 이었다. $Tb^{3+}$를 도핑한 형광체의 주 흡광 스펙트럼은 316 nm에서 발생하였고, 발광 스펙트럼은 545 nm에 피크를 갖는 녹색 발광 신호가 나타났다. 활성제이온의 종류에 따른 형광체의 흡광과 발광, 결정 구조의 특성을 체계적으로 제시하고자 한다.

• Analytical Science and Technology
• /
• v.14 no.5
• /
• pp.410-415
• /
• 2001

An analytical method has been developed which determines lead in steel samples by inductively coupled plasma mass spectrometry (ICP-MS) with sample introduction by the hydride generation. The lead hydride is not stable and requires and oxidant for the oxidation into metastable Pb(IV) before reduction to $PbH_4$ with $NaBH_4$. A study was carried out to find and optimum lead hydride generation condition for a sample solution with more than $1000{\mu}g/mL$ Fe matrix. $K_2Cr_2O_7$ was found to work as an efficient oxidant when more than $10{\mu}g/mL$ Fe matrix was present. Lactic acid was used with the oxidant as a complexing agent of the metastable Pb(IV) to enhance sensitivity. Optimum concentrations of the sample acidity, oxidant and lactic acid were different depending on the matrix concentration. The isotope dilution method was employed for the quantitation of lead. The determined Pb concentrations of the NIST steel SRM 361 and 362 were in good agreement with the certified values within the uncertainty range.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.4 no.3
• /
• pp.198-207
• /
• 1999

Five core sediments acquired from the Lake Shihwa are analyzed for variations of sedimentary environment and heavy metal pollution after the Shihwa seawall construction. The depositional environment of the study area is divided into anoxic, oxic and mixed suboxic conditions based on the C/N ratio and C/S ratios of organic matters. Controlling factors for redox condition are the water depth and the difference in industrial effluents supply. Correlations among geochemical elements (Mn, U, Mo) show a distinctive difference and thus can be used as an indicator of redox condition. The content of Al, Ti are dependent on the sediment characteristics, and the contents of heavy metals (Cr, Ni, Cu, Zn, and Pb) indicate heavy metal pollution. The concentrations of heavy metals are higher near Shiswa-Banwol industrial complexies than the central part of Lake Shihwa. Especially, the accumulation of the heavy metal at the surface sediments near Shihwa-Banwol industrial complex are two to eight times higher than in the center of Lake Shihwa.

• Journal of the Korean Society of Radiology
• /
• v.15 no.1
• /
• pp.63-70
• /
• 2021

Radiographic contrast agents are used for diagnostic purposes and are one of the factors affecting measured values in bone density tests. They are absorbed into tissues and have an effect of increasing the measured values of bone density, so they are avoided as much as possible before performing a bone density test. MRI contrast agents, which have different physical properties and mechanisms of action than radiographic contrast agents, are based on gadolinium, a metal element. They have radiopacity characteristics, so MRI are generally performed prior to examination using radiation. The purpose of this study was to investigate the effects of MRI contrast agents on bone mineral density examination using dual energy X-ray absorption. Two types of gadolinium based MRI contrast agents were injected into an acrylic water tank for each volume, and the humanoid spine phantom was inserted and the BMD and T-score from (L1-L4) were analyzed by scanning a total of 30 times, 5 times for each injection type. The average value of the measured total (L1-L4) bone density for each of the two contrast agents was 0.952±0.052, 0.957±0.050, and 0.956±0.05g/㎠, respectively, for the Gadoterate Meglumine component 0mL, 7.5mL and 15mL, when the gadobutrol components were 0mL, 5mL, and 10mL, there was no statistically significant difference at all sites at 0.953±0.001, 0.954±0.001, and 0.945±0.001g/㎠, respectively(p>0.05). The average value of total T-score was -0.46±0.05, -0.4±0, -0.42±0.04 when the Gadoterate Meglumine component was 0mL, 7.5mL and 15mL, respectively. When the Gadobutrol ingredients were 0mL, 5mL and 10mL, there was no statistically significant difference in all areas, with -0.46±0.05, -0.46±0.05, and 0.5±0.00, respectively. In this experiment, the MRI contrast agent was found to have no effect on bone density tests, using the dual-energy X-ray absorption method. There is a limitation in that physical conditions such as kidney and health conditions etc. were not taken into consideration, so further clinical research is expected to be conducted in the future.

• The Journal of the Petrological Society of Korea
• /
• v.23 no.3
• /
• pp.167-185
• /
• 2014

SHRIMP zircon U-Pb ages and major element and Sr-Nd isotopic compositions were determined for drill cores (374-3390 m in depth) recovered from three boreholes in the Pohonag basin, southeastern Korea. Shallow-seated volcanic rocks and underlain plutonic rocks were geochemically classified as rhyolite and gabbro-granite, respectively. They showed high-K calc-alkaline trends on the $K_2O-SiO_2$ and AFM diagrams. Zircons from volcanic rocks of borehole PB-1 yielded concordia ages of $66.84{\pm}0.66Ma$ (n=12, MSWD=0.02) and $66.52{\pm}0.55Ma$ (n=12, MSWD=0.46). Zircons from volcanic rocks of borehole PB-2 gave a concordia age of $71.34{\pm}0.85Ma$ (n=11, MSWD=0.79) and a weighted mean $^{206}Pb/^{238}U$ ages of $49.40{\pm}0.37Ma$ (n=11, MSWD=1.9). On the other hand, zircons from plutonic rocks of borehole PB-3 yielded weighted mean $^{206}Pb/^{238}U$ ages of $262.4{\pm}3.6Ma$ (n=21, MSWD=4.5), $252.4{\pm}3.6Ma$ (n=8, MSWD=1.9) and $261.8{\pm}1.5Ma$ (n=31, MSWD=1.3). Detrital zircons from the sedimentary strata overlain the volcanic rocks showed a wide age span from Neoproterozoic to Cenozoic, with the youngest population corresponding to $21.89{\pm}1.1Ma$ (n=15, MSWD=0.04) and $21.68{\pm}1.2Ma$ (n=10, MSWD=19). These dating results indicate that the basement of the Pohang basin is composed of Late Permian plutonic rocks and overlain Late Cretaceous to Eocene volcanic sequences. Miocene sediments were deposited in the uppermost part of the basin, possibly associated with the opening of the East Sea. The Sr-Nd isotopic compositions of the Permian plutonic rocks were comparable with those reported from Permian-Triassic granitoids in the Yeongdeok area, northern Gyeongsang basin. They may have been recycled into parts of the Cretaceous-Paleogene magmatic rocks within the Gyeongsang basin.

• Applied Chemistry for Engineering
• /
• v.20 no.1
• /
• pp.21-27
• /
• 2009

Resins were synthesized by mixing 1-aza-15-crown-5 macrocyclic ligand attached to styrene (a hazardous material) divinylbenzene (DVB) copolymer with crosslink of 1％, 2％, 5％ and 20％ by a substitution reaction. The characteristic of these resins was confirmed by the content of chlorine, element analysis, thermogravimetric analysis (TGA), surface area (BET), and IR-spectroscopy. The effects of pH, time, dielectric constant of solvents and crosslink on adsorption of metal ions by the synthetic resin adsorbent were investigated. The metal ion was showed a fast adsorption on the resins above pH 3. The optimum equilibrium time for adsorption of metallic ions was about two hours. The adsorption selectivity determined in ethanol was in increasing order of uranium ($UO_2^{2+}$) > manganese ($Mn^{2+}$) > praseodymium ($Pr^{3+}$). The adsorption was in the order of 1％, 2％, 5％, and 20％ crosslink resin and adsorption of resin decreased in proportion to the order of dielectric constant of solvents.