• Tunnel and Underground Space
• /
• v.13 no.3
• /
• pp.235-243
• /
• 2003

Recent worldwide trends show that tunnel length is getting longer, and the demand for longitudinal ventilation system with jet-fans in highway tunnels has also increased mainly due to the economic reasons. Improvements in vehicle engine subsequently reduced required ventilation rate(Qreq) which is the decisive factor in choosing the optimal ventilation system. Qreq contour map is a graph that defines the relationship among tunnel length, grade and required ventilation rate. It is important to understand the variation of Qreq in order to evaluate the characteristics of ventilation system with jet fans. Therefore this study aims at studying a graphical method for determining the characteristics of jet-fm ventilation system using Qreq contour map. Also, this study focuses on traffic composition on local highways.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.30 no.7
• /
• pp.24-28
• /
• 2001

터널 환기 설비는 터널에서 발생하는 오염물질을 희석 배출하여 터널에서의 안전운행 및 쾌적한 환경을 유지함을 목적으로 한다. 이를 위해서 각종 환기설비가 필요하게 되며, 이에 대한 설계 검토가 요구되고 있다. 본 원고에서는 제트팬 방식의 터널에서 풍속 측정을 중심으로 하여 측정결과 및 분석결과를 소개하고자 한다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.313-318
• /
• 2011

도로터널은 반지하 공간으로서 환기에 많은 설비와 구조에 대한 연구가 진행되고 있으며 특히 제트팬의 경우 평상시에는 환기를 담당하고 있다. 또한 화재시에는 화재연기의 유독가스를 효과적으로 차단하는 제연역할을 함으로서 피난에 대한 중요한 역할을 담당한다. 이러한 제트팬의 특성을 정량적으로 유추하고 공학적인 QRA의 수행을 위한 기초적 연구로서 터널내부의 제트팬의 환기특성을 알아보기 위하여 모형실험체의 내부측정을 2/3까지한 전보에 이어 이번 연구에서는 터널내부전체를 측정하여 제트팬이 모형터널내에 미치는 영향을 CFD와 비교한 연구이다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.749-762
• /
• 2019

In recent years, in urban areas, underground of roads are being promoted in order to resolve traffic congestion and to secure green spaces, and due to the low ratio of large vehicles, they are planned or constructed as road tunnels for small cars only. In addition, the tunnels being built in the city is a tendency to be enlarged to play the role of main roads. Accordingly, the capacity of the ventilation system is increasing and various ventilation methods are required, and the importance of maintenance after the completion of the tunnel such as the operating cost of the ventilation system is emphasized. Therefore, the need for optimization of the operation stage for reducing the power consumption of the ventilation system and the study of the ventilation system operation control logic is increasing. In this study, the study on the necessity of the optimization of operation stage and control logic of the ventilation system was carried out to realize the energy-saving operation for the small car only passing through tunnels which is applied of ① jet fan and combination ventilation system (② jet fan + air purifying equipment, ③ jet fan + vertical shaft, ④ jet fan + supply air semi-transverse). As a result of this study, there can be various operating combinations in the case of the combined ventilation system, and even though the amount of ventilation air is the same, the operating power varies greatly according to the operating combinations. It was found that operating the axial fan first rather than the jet fan first operation method has an effect on power saving.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.2
• /
• pp.107-116
• /
• 2012

The experiment was performed to analyze the intersectional ventilation efficiency by intersection structure and Jet Fan in network-form road tunnel. For this, the size of real road tunnel was reduced by 1/45. To apply traffic inertia force when driving, blower fan was used to form an airflow in model tunnel and the intersectional efficiency was also investigated by measuring the speed at local point of the tunnel. To improve the reduction of ventilation caused by the structure character, Jet Fan was installed to optimize ventilation efficiency in tunnel.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1995.04a
• /
• pp.92.1-92
• /
• 1995

Weerdar 개폐식 후두경은 Kleinsasser 후두경과 Killian-Lynch 현가 후두경의 장점을 혼합하여 개발한 것으로서 광학장치, 흡인관, injection cannula 등을 후두경에 부착할 수 있다. 그리고 후두경 내강에 injection cannula를 장치하여 고빈도 제트환기법, 고빈도 진동법, 고빈도 양압환기법을 시행할 수 있다. 이 경우 기관내 삽관을 배제하여 cannula선단이 성대 위에 위치하기 때문에 성대의 후교련까지 시야를 확보할 수 있고, 후두경 양측에 넓은 틈이 있기에 수술조작이 용이하며, 레이저 사용시에 화재의 위험을 최소로 할 수 있다. 이에 성대수술시 cannula를 통한 제트환기 중 시간 경과에 따른 활력징후, 동맥혈산소화, 이산화탄소의 배출상태 변화를 관찰하였다. 그 결과 수슬시간 30분까지 동맥혈 산소분압의 감소나 이산화탄소 축적은 관찰되지 않았기에 30분 이내의 성대수술시 기관내 삽관없이도 시행할 수 있는 안전한 마취관리의 한 방법이라 생각한다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.341-351
• /
• 2015

When rainfall occurred on road tunnel, that is likely to have influence upon ventilation force in the tunnels but the tunnels ventilation system did not consider factors of rainfall. Thus, this study investigated effects of rainfall upon ventilation force in the tunnels at no rainfall and changing of rainfall by 3 dimensional numerical method. Flow rate into road tunnels decreased as many as 52.34% at rainfall of 150 mm/hr, and pressure drop of road tunnel between entrance and exit decreased as many as 22.22%, so that rainfall had influence upon ventilation force in the tunnel. The number of necessary jet fan in road tunnels is 12 at no rainfall but, when rainfall of 80 mm/hr on road tunnels, the number of necessary jet fan in road tunnels is 16, when rainfall of 150 mm/hr on road tunnels, the number of necessary jet fan in road tunnels is 17. So, factor of rainfall should be considered at estimation of ventilation system of road tunnel.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.4
• /
• pp.81-89
• /
• 2014

Tandem-ejector has been devised for engine-bay cooling. In this study, 1-D model has been developed to analyze Tandem-ejector. In the model, the primary, the secondary and the tertiary flow conditions have been analyzed with isentropic process. The mixing process has been analyzed with conservation laws based on the control volume analysis. The total pressure loss of the primary flow has been analyzed under the matching condition between the static pressure of Tandem-ejector discharge flow and atmospheric pressure. Consequently, 1-D model can predict Tandem-ejector performance accurately and provide the performance map.

• Magazine of korean Tunnelling and Underground Space Association
• /
• v.14 no.3
• /
• pp.38-47
• /
• 2012

고속도로 터널 공사비의 가장 큰 비중을 차지하는 터널 단면 설계시, 주요 표준단면 결정요소의 일률적인 적용 및 기존 단면을 답습함에 따라 터널 천단부 등에 과대한 사공간이 발생하고 있으며, 기계환기 터널의 경우 제트팬 설치가 가능하도록 계획된 단면을 터널 전연장에 적용하고 있으나, 대부분의 구간은 제트팬 설치가 불필요한 구간이므로 이를 감안한 경제적인 단면 계획이 필요한 실정이다. 본 연구에서는 터널 내공단면 결정요소에 대한 개선 사항 및 기계환기 터널 적용시 단면 이원화를 통한 고속도로 터널 단면 최적화 방안을 도출하였다. 결과적으로 굴착 단면 최적화에 따른 경제성 확보 및 $CO_2$ 절감 효과를 기대할 수 있으며, 설계시 이를 바탕으로, 터널의 환기, 방재조건 및 토공량 등 노선 특성을 고려한 최적의 단면 계획이 필요하다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.7
• /
• pp.567-574
• /
• 2002

In the present study, ventilation flow rates and pressure rises through a road tunnel are simulated numerically using CFD with the various conditions such as roughness height, swirl angle of jet fan, entrance and exit effect and hub to tip ratio. By using a modified wall function, friction factor can be predicted under 10％ of error with respect to the Moody chart for the circular pipe flow and 15％, for the present tunnel. For more precise design, the effects of the swirl angle and hub to tip ratio of jet fan, which is not included in the theoretical equation of pressure rise by jet fan are necessary to be considered.