• The Journal of the Korea Contents Association
• /
• v.18 no.6
• /
• pp.564-573
• /
• 2018

External environment of enterprises are rapidly changing brought about mainly by global competition, cost and profitability pressures, and emerging new technology. In particular, frequent change of customer requirements is a tough challenge to manufacturing company. To cope with these challenges, a production planning and scheduling (PP&S) function might be established to provide accountability for both customer service and operational efficiency. PP&S deals with short-term decision making in the production process of whole supply chain. The task of PP&S is to seek a balance between customer orders and limited resources. At present, many PP&S software solutions have been utilized in many enterprises to generate a realistic production plan and schedule efficiently. The aim of this paper is to analyze the PP&S functionalities and its system architecture from the perspective of SCM (Supply Chain Management), and propose the PP&S solution classification framework to facilitate the comparison among various solutions.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.67-73
• /
• 2012

After flash memory card(FMC) was manufactured by $B^2it$ process, interfacial reaction of silver bump with thermal stress was studied. To investigate bonding reliability of Ag bump, thermal shock and thermal stress tests were conducted and then examined on the crack between Cu land and Ag bump interface. Diffusion reaction of Ag bump/Cu land interface was analyzed using SEM, EDS and FIB. The Ag-Cu alloy layer due to the interfacial reaction was formed at the Ag/Cu interface. As the diffusivity of Ag ${\rightarrow}$ Cu is faster than Cu ${\rightarrow}$ Ag, a lot of (Cu, Ag) alloy layers were observed at the Cu layer than Ag. These alloy layers contributed to increase the Cu-Ag bonding strength and its reliability.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.2
• /
• pp.153-160
• /
• 2015

The marble powder is a by-product that can be freely collected during the manufacturing process of marble, such as sawing, shaping, and polishing. Disposal of this waste powder is one of the environmental problems worldwide today. Therefore, this study investigated to solve this problem by consuming the waste marble powder in high fluidity concrete, as a pore filler. For this purpose, the waste marble powder was used as a binder replacing 5%, 10%, 15%, and 20% of cement in high fluidity concrete. After mixing, slump flow test, time-to-reach the slump flow of 500mm test, O-lot test and U-box test were conducted with fresh concrete. For the hardened concrete, compressive strength was determined at the age of 28 days. According to the test results, the workability of high fluidity concrete increased with the powder of 15% replacement, and the compressive strength of high fluidity concrete also increased with the same amount of powder.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.387-392
• /
• 2005

Recently, dimethyl carbonate (DMC) is considered as an alternative of MTBE (methyl tert-butyl ether), additive for non-leaded gasoline with their fast biodegradation rate and low toxicity. DMC is usually synthesized so far by oxidative carbonylation of methanol, and recently developed synthetic process is also started with methanol. Since the phase equilibria of the system, consisted of DMC and methanol or other reaction products on different temperature and pressure is necessary for the optimum separation process design and operation. However the reported phase equilibria and physical properties for DMC mixtures in the Dortmund Data Bank (DDB; thermodynamic property data bank) are quite rare. Besides, infinitely dilute properties are not found. In this work, isothermal vapor-liquid equilibria at 333.15 K for methanol+DMC binary system and mixing properties, excess molar volume and viscosity deviation at 298.15 K are directly measured and correlated. Additionally, infinitely dilute activity coefficient of methanol in the DMC solvent at three different temperatures are measured and compared with predicted values using modified UNIFAC (Dortmund).

• The Transactions of the Korean Institute of Power Electronics
• /
• v.14 no.1
• /
• pp.46-53
• /
• 2009

A new zero-current switching LLC resonant post-regulator for multi-output power system is proposed in this paper. A conventional LLC resonant converter employs extra non-isolated DC/DC converters to obtain tight-regulated multi-slave output voltages. Therefore, it has several serious problems such as a poor efficiency and high cost of production. The proposed post-regulator features low voltage and current stress across the output rectifier diodes and power switches. Moreover, the proposed post-regulator requires only one power switch instead of the bulky and expensive non-isolated DC/DC converter. Therefore, it features a simple structure and lower cost. Especially, since the proposed post-regulator can ensure the ZCS of all power switches, it has very desirable advantages such as more improved EMI characteristics and reduced switching losses. Finally, to confirm the operation, validity, and features of the proposed circuit, experimental results from a proposed zero-current LLC resonant post-regulator are presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.1-9
• /
• 2020

The manufacturing processes of high-precision parts for PGM (Precision Guided Missiles) have not been improved for decades; they still depend on machining or high-precision casting. These processes have an advantage when making small amounts of high-reliability parts in the usual case of a PGM system. In the case of a PGM system, however, which has been made for striking an extensive area, requires hundreds of bomblet units that require mass productivity. In addition, in the case of a part that is very difficult to machine, mass productivity and quality cannot be satisfied at the same time. In particular, cost reduction is an essential precondition to strengthening the export competitiveness of Korean defense articles. This study examined whether the MIM process is appropriate for manufacturing high-precision parts that require mass productivity. The optimized MIM process condition was determined after carrying out fundamental research. Comparisons of the quality of prototype parts with original parts and a functional test of a fuse that had been made with MIM parts highlighted the application possibility of the MIM process.

• Journal of the Korean Society for Railway
• /
• v.19 no.3
• /
• pp.363-372
• /
• 2016

This study identifies influence factors for Korean railway export and analyzes the importance and competitiveness of the factors. This study also suggests policy directions for each factor and analyzes the current situation of the Korean railway industry. All influence factors identified in this study turned out to have high levels of importance. Influence factors with higher importance levels for each field are as follows: man-power/experience and skill/technology in the engineering field; price, information and man-power/experience in the construction field; and information, technology, and price in the manufacturing field. However, the level of competitiveness of the factors turned out to be low. This study also suggested policy directions for each influence factor: overall, they turned out to have high levels of importance. Policy directions with high importance for each field are as follows: strengthening overseas' human network, training/educating experts for overseas projects, and accumulating experiences through Official Development Assistance projects in the fields of engineering and construction; and cost reduction and strategical cooperation with foreign companies in the manufacturing field. However, interviewees' satisfaction levels for each policy area turned out to be low. Finally, policy measures for Korean railway export for each influence factor were suggested.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.364-364
• /
• 2013

현재 투명전극은 주로 ITO를 사용하고 있으며, ITO는 인듐산화물(In2O3)과 주석산화물(SnO2)이 9대 1의 비율로 혼합된 화합물로 인듐이 주성분이다. 따라서 ITO 사용량의 증가는 인듐의 수요 증가를 이끌어 2003년 이후 인듐 잉곳의 가격이 급등하였다. LCD에 응용되는 금속재료의 가격추이를 비교해보면, 인듐이 가장 큰 변화를 보이고 있으며, 2005년 인듐 가격은 2002년 대비 1,000% 이상 상승하였다가 2007년 이후 500%p 하락하여 2008년 2월 22일 기준으로 톤당 49만 달러에 거래되고 있다. 같은 기간 동안 알루미늄의 가격은 76.6% 상승하였으며 구리는 394%, 주석은 331% 상승하였다. 이러한 인듐의 가격 상승폭은 동일한 기간 동안 다른 금속 재료와 비해 매우 크며, 단위 질량당 가격도 20배 이상 높은 수준이다. ITO의 주성분인 인듐의 이러한 가격의 급등 및 향후 인듐의 Shortage 예상으로 인해 ITO 대체재 확보의 필요성이 증가되고 있다. 태양광 발전산업에서 현재 주류인 결정질 실리콘 태양전지의 변환효율은 꾸준히 향상되고 있으나, 태양전지의 가격이 매년 서서히 하강되고 있는 실정에서 결정질 실리콘 가격의 상승 등으로 고부가 가치 산업유지에 어려움이 있으며, 생산 원가를 낮출 수 있는 태양전지 제조기술로는 2세대 태양전지로 불리는 박막형이 현재의 대안으로 자리매김하고 있으며, 박막태양전지 산업분야가 현재의 정부정책 지원 없이 자생력을 갖추고 또한 시장 경쟁력을 확보하기 위해서는 박막태양전지 개발과 더불어 저가의 재료개발도 시급한 상황이다. 본 연구에서는 In-line magnetron sputtering system을 사용하여 소다라임 유리기판 위에 박막태양전지용 투명전도성 ZnO(Al) 박막 및 ZnO(AlGa) 박막을 각각 제작하였다. 각각 박막의 표면특성 및 성장구조, 결정성을 조사하였고, 또한 전기적 특성, 홀이동도와 개리어농도, 박막의 두께, 광투과율 특성을 연구하였다. ZnO(Al)박막, ZnO(AlGa)박막 대한 각각 특성을 평가하고 그 결과들을 논하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.7
• /
• pp.417-422
• /
• 2017

One of the most frightening aspects of weapons of mass destruction (WMD) is their ability to cause death in very small quantities without being visible to the public. The military authorities are making considerable effort to ensure the survivability of the combatants in the event of NBC(Nuclear, Biological and Chemical) contamination. Therefore, in this study, modules were developed for the measurement of the positive pressure and for the detection of the chemicals used for the control of the various shut-off valves used in an NBC shelter. In addition, a high performance gas tight shut-off valve was developed that can overcome the disadvantages associated with manual manufacturing, such as the occurrence of defective products and high manufacturing cost. By applying the positive pressure measurement and chemical detection modules, this valve was able to be used to control the facility. The developed gas-tight shut-off valve maintained airtight characteristics at a pressure loss of 28[Pa] at the prescribed wind velocity and an internal pressure of 30[kPa]. It is expected to be possible to control the gas-tight shut-off valve through the remote measurement of the positive pressure, thereby ensuring the foreign independence of import substitution and defense related technology in the future. In addition, by installing these valves in all of the intake ports or exhaust ports connected to the outside of the NBC shelter, it is possible to prevent the damage resulting from the rapid inflow of the storm pressure caused by conventional weapons and nuclear explosions, thereby protecting the people and equipment in the shelter.

• Proceedings of the Korean Journal of Food and Nutrition Conference
• /
• 2000.05a
• /
• pp.5-7
• /
• 2000

국내에서의 식이섬유의 이용은 대부분 저분자량의 수용성 식이섬유를 이용한 음료형태가 주류를 이루고 있으며, 밀기울, 귀리, 옥수수 껍질 등으로 부터 얻는 불용성 식이섬유는 제과 및 제빵등에 이용되어 오고 있다. 수용성 식이섬유는 혈중 콜레스테롤을 저하시키며, 불용성 식이섬유는 변비예방과 장기능 증진효과가 탁월한 것으로 알려져 있다. 그러므로, 대장암과 변비같은 장질환 환자가 날로 증가하고 있는 상황에서 국내산 미이용 자원으로부터 불용성 식이섬유의 기능성 향상과 활용기술을 개발하는 것은 식품산업적 가치가 크다고 할 수 있다. 또한, 국내에서 소비되고 있는 폴리덱스트로스와 올리고당과 같은 기능성 당류의 대부분이 외국에서 수입하여 국내에 보급되고 있기 때문에 큰 외화지출이 되고 있다. 따라서 본고에서는 국내산 미곡 부산물인 밀기울 식이섬유 세포벽의 불용성 구조를 수용성으로 변화시킬 수 있는 변형기술과 얻어진 수용성 식이섬유 소재의 특성을 소개하고자 한다. 즉, 밀기울 세포벽의 수용화를 위한 가공처리는 압출성형 공정에 의하여 실시하였으며, 수용화가 수반되는 압출성형 조건에 따른 식이섬유 소재의 이화학적 특성과 수용화가 일어난 세포벽 성분의 분해기작에 대한 연구결과를 정리하였다. 그리고, 현행 올리고당과 식이섬유의 산업적 생산공정에서 문제점으로 대두되고 있는 효소처리, 산성하에서의 감압가열, 고점도 원료물질의 이송, 생물공학적 공정제어, 반응시간, 잔여 효소의 불활성화 및 재활용, 제조원가 상승 등과 같은 것을 해결하거나 개선할 수 있는 효율적인 압출반응공정의 조건과 생산된 소재 glucooligosaccharide, fructooligosaccharide, galactooligosaccharide 등의 특성에 대하여 논하여 보기로 한다.경우가 많지 않다. 또한 그 발생 경위나 원인요소에 대해서는 일반에게 공개되지 않고 있어, 우리가 실천하여 식중독을 예방할 수 있는 정보가 함께 제시되지 못하는 형편이다. 따라서 본 고에서는 최근 수년간 외국에서 학교급식을 비롯한 집단급식 등에서 발생한 식중독 사례를 중심으로 고찰, 분석하였다. 이로부터 식중독 발생에 기여한 주요 원인을 찾아내고 여기서 얻어지는 교훈을 토대로 식중독 발생을 예방 및 최소화할 수 있는 실천적 대처 방안을 모색해 보고자 한다.중의 E. coli O157:H7이 연관되어있다는 보고도 있다. 목장 방문시 원유를 마신 어린이에서 HUS가 유발하였고, 균분리 결과, 농장의 소와 어린이에서 유사한 E. coli O157:H7이 분리된 바 있다. 본 연자들은 베로톡신 유형, plasmid profiles, RFLP 분석, phage type을 기초로하여 소에서 분리된 E. coli O157:H7이 사람유래주와 매우 유사함을 확인하였다.mm 및 2-6mm 난포에서의 101개(67.8%) 및 47개(50.0%) 보다 매우 낮게 나타났다. 전체 회수 난포란수도 4등급이 59.1%(149/252)로써 1, 2, 3등급의 0.4% (1/252), 7.6%(19/252) 및 32.9%(83/252)보다 높게 나타났다. 1회 평균 회수 난포란은 $\leq$2mm 난포에서 4.8$\pm$3.7개로써 2-6mm(3.0$\pm$3.4개) 및 $\geq$6mm (0.3$\pm$0.6개)보다 높았으며, 1회당 평균 8.1$\pm$5.1개의 난포란을 회수하였다. investigation can be separated into sa