• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.6 no.1
• /
• pp.17-27
• /
• 1996

This study was designed to survey exposure levels of formaldehyde among workplaces in some plywood industries and to compare three sampling methods including the impinger method(IM, NIOSH method No. 3500), the solid sorbent tube method(SS, NIOSH method No. 2541), and the passive bubbler monitor method(PB, SKC). The survey was conducted in seven particle board manufacturing factories, two resin manufacturing factories and two plywood manufacturing factories in Incheon area during the period from March 6 to April 20, 1995. The workplaces included were the hot/cold press, the roller/spreader, the soaking/drying, and the reaction/mixing areas. The results were as follows; 1. The average(GM, GSD) concentrations of formaldehyde by sampling methods were 0.11(4.43) ppm by IM, 0.27(2.03) ppm by SS, and 0.29(2.04) ppm by PB, respectively. The concentrations by 1M method were statistically very significantly lower than those of SS and PB methods, particularly at low air borne concentrations of formaldehyde (p<0.001). 2. The area average concentrations of formaldehyde by workplaces measured with PB bubblers were 0.23(2.08) ppm from the press, 0.23(1.77) ppm from the spreader, 0.24(1.51) ppm from the soaking, and 0.46(1.96) ppm from the reaction areas, respectively. The personal average concentrations of formaldehyde by workplaces measured with PB bubblers were 0.30(1.77) ppm from the press, 0.33(1.54) ppm from the spreader, 0.36(1.46) ppm from the soaking, and 0.84(1.19) ppm from the reaction areas, respectively. 3. No statistically significant differences of formaldehyde concentrations among workplaces except the reaction area(p<0.001) were found. 4. Formaldehyde concentrations from personal samples were higher than those of from area sam pies in all workplaces studied. But no statistically significant differences of formaldehyde concentrations both area and personal samples were found. In conclusion, this study found that although formaldehyde concentrations in some plywood industries in Incheon area were below the regulatory limit of 1 ppm, they were over the limits recommended by NIOSH and ACGIH. This study also suggests that the impinger method may underestimate true formaldehyde concentrations. It implies that there will be more workplaces not meeting current regulatory limit if either the solid sorbent or passive bubbler methods were used instead of the impinger method. It is suggested that passive monitors will be a reasonable alternative for area and personal sampling of formaldehyde if the accuracy and validity of passive monitors be verified before use.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.565-572
• /
• 2009

Greenhouse gas(GHG) inventories and basic strategies for Jeonbuk regional government were established to reduce greenhouse gas emissions. The method to construct GHG inventories of Jeonbuk followed the 'Revised IPCC 1996 Guidelines'which was used for the 'Third National Communication of the Republic of Korea under UNFCCC'. Korean government could use primary energy consumption for the energy industries section in the national GHG inventories. However, regional governments should use secondary energy consumption (included electricity consumption) for the energy industries section for their GHG inventories because they could not control the emission of energy transformation section. In the result of Jeonbuk GHG inventories in 2006, carbon dioxide($CO_2$) emissions from fuel combustion covered 87.1% of total emissions. Methane($CH_4$), carbon dioxide($CO_2$) from other sections, nitrous oxide($N_2O$) and F-gas(HFCs, PFCs, $SF_6$) accounted for 8.1, 2.2, 1.6 and 1.0% of total emissions, respectively. The sectional emission decreased in the order of the energy(88.0%), agriculture(7.6%), waste(2.3%) and industrial processes(2.1%) section. The energy industries section that contained electricity consumption was the most dominant emission source in the energy section. F-gas consumption, rice cultivation and waste incineration were main emission sources in the industrial processes, agriculture and waste section, respectively. In this study, basic directions of each section were established by the results of Jeonbuk GHG inventories in 2006.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.22 no.3
• /
• pp.244-256
• /
• 2012

Objectives: This study was conducted to assess the level of depression and its association with sociodemographic characteristics and health related characteristics, job-related characteristics, sleep quality, occupational stress among manufacturing male immigrant worker in Korea. Methods: Total number of subject were 287 workers employed in 19 manufacturing industry. A structured self-administered questionnaire was used to assess each responder's sociodemographic and health related characteristics, job-related characteristics, sleep quality (PSQI), Korean occupational stress (KOSS), Depression (CES-D). The job stress questionna ire was used according to KOSS-26 and depression symptoms were measured using CES-D, which was translated into Korean. We used multiple logistic regression analysis to assess the relationship between risk factors included job stress, sleep quality and depression. Results: The prevalence of depression in survey subjects was 63.9%and poor group (PSQI) (5 point and over at PSQI score)among all subjects were 83.28%. Adjusting for confounding factor, higher the occupational stress (KOSS), depression levels were significantly higher (${\beta}=0.5575$), worse quality of sleep, the more depressed the level was slightly high ${\beta}=0.118$) did not reach statistical significance. Conclusions: The prevalence of depressive symptoms among the study subjects was higher than that among the Korean workers. Especially, the level of depression was more influenced by occupational stress than quality of sleep. Therefore, the author recommend to prepare the effective strategy for reducing the depression and also reducing the occupational stress among immigrant male workers, and the author consider that it need to support the convenient working environment such as consultation for difficulty or health care among immigrant male workers.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.29 no.1
• /
• pp.69-81
• /
• 2019

Objective: The purpose of this study was to find out what kind of change in death rate when job stress is solved by calculating job stress relieve coefficient. Methods: This study used the data of the fourth working condition survey. Regression analysis was used to determine the relationship between health effects recognition and Death rate per 10,000 workers. After that the recognizing and non - recognizing groups were categorized by health effects recognition, and the differences between the two groups were confirmed by cross tabulation analysis. Results: Regress analysis P-value is 0.011 and $R^2$ is 0.979. Death rate per 10,000 worker increased with the increase in the number of non - health impact recognizing group. The relieve factors were (1) work culture(2.859) (2) physical environment(2.184), (3) improper reward (1,839), (4) relationship conflict(1.646), (5) job requirement(1.613), (6) job autonomy(1.354), (7) job instability(1.334), And (8) organizational system(1.201). The higher the relieve coefficient is, the higher the probability of belonging to the non - health impact recognizing group when there is no job stress factor. Conclusions: When job stress is resolved, there is a high probability that the health impact recognition is reduced, which can lead to an increase in death rate. but according to previous studies, Job stress can cause accidents by reducing the safety behavior of accidents. The job stress management plan should simultaneously consider reducing job stress and increasing health impact recognition.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.2
• /
• pp.37-49
• /
• 2023

In this study, we proposed resource allocation methodologies to improve the productivity of steel bridge manufacturing plants based on the constraint theory which is very popular in the area of manufacturing industries. To this end, after defining the painting process as a bottleneck, three resource allocation methodologies were developed: Operation Specific Resource Allocation (OSRA), Product Specific Resource Allocation (PSRA), and General Resource Allocation (GRA). As a result of experiments for performance evaluation using a simulation model of the steel bridge supply chain, GRA showed the best performance in terms of the Number of Work-In-Process (NWIP) and Waiting Time (WT), in particular, as workload itself and its variability were increased, the performance gap with the specific resource allocation became further deepened. On average, GRA reduced NWIP by 36.2% and WT by 34.6% compared to OSRA, and reduced NWIP by 71.0% and WT by 70.4% compared to PSRA. The reduction of NWIP and WT means alleviating the bottleneck of the painting process, which eventually means that the productivity of the steel bridge manufacturing plant has improved.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.28 no.3
• /
• pp.81-101
• /
• 2003

The financial statements purpose to provide useful information to decision-making process of business managers. The value-relevant information, however, embedded in the financial statement has been often overlooked in Korea. In fact, the financial statements in Korea have been utilized for nothing but account reports to Security Supervision Boards (SSB). The objective of this study is to develop earnings forecasting models through financial statement analysis using artificial intelligence (AI). AI methods are employed in forecasting earnings: artificial neural networks (ANN) for manufacturing industry and case~based reasoning (CBR) for banking industry. The experimental results using such AI methods are as follows. Using ANN for manufacturing industry records 63.2% of hit ratio for out-of-sample, which outperforms the logistic regression by around 4%. The experiment through CBR for banking industry shows 65.0% of hit ratio that beats the statistical method by 13.2% in holdout sample. Finally, the prediction results for manufacturing industry are validated through monitoring the shift in cumulative returns of portfolios based on the earning prediction. The portfolio with the firms whose earnings are predicted to increase is designated as best portfolio and the portfolio with the earnings-decreasing firms as worst portfolio. The difference between two portfolios is about 3% of cumulative abnormal return on average. Consequently, this result showed that the financial statements in Korea contain the value-relevant information that is not reflected in stock prices.

• Journal of the Korean Society of Safety
• /
• v.28 no.3
• /
• pp.100-106
• /
• 2013

According to the Statistics Korea, in 2011, people over the age of 65 years old accounted for 11.8% of Korea's population. This number is expected to rise to 15.0% by 2019, making Korea an "aged society". As age increases, physical ability degrades to the point that the workload must be adjusted limitations. However, workloads are given regardless of workers' ages or abilities. In addition, a decline in work efficiency due to aging also increases the risk of work-related injuries. Furthermore, the cases of stress related diseases along with musculoskeletal disorders(MSDs) rise as main factors of industrial disasters and excessive job stress gives negative influence not only on mental health but also on physical health so that job stress becomes a hot issue as a main cause of work ability falloff and turnover. The purpose of this research is to examine how the sociodemographic characteristics, MSDs symptoms and musculoskeletal workload of workers in the manufacturing industry of automobile parts influence work ability and job stress. As a result of the research, job ability showed significant differences statistically according to age, working year, sex, marital status and musculoskeletal workload and job stress showed significant differences statistically according to age, working year, marital status and musculoskeletal workload. In addition, it showed that as the worker's job ability decreases, job stress increases.

• Journal of the Korean Society of Physical Medicine
• /
• v.14 no.3
• /
• pp.109-116
• /
• 2019

PURPOSE: This study examined the effects of an active tailored exercise program on pain and the Oswestry disability index (ODI) among workers with musculoskeletal symptoms of the lower back in an automobile parts manufacturing company. METHODS: Twenty-two workers with musculoskeletal symptoms of the lower back were included in the study. The experimental group was composed of 15 workers and a control group of seven workers. The experimental group was provided an active tailored exercise program and education on the risk factors of musculoskeletal disorders. The control group was only provided ergonomic education. The exercise program, which consisted of movement pattern correction, muscle stretching and strengthening, and postural correction exercises, was applied twice a week for two months for one hour a day. Pain, which was determined using a visual analogue scale (VAS), and the ODI were measured before and after exercise. RESULTS: After applying the exercise program for two months, the VAS and ODI of the experimental group were significantly lower than those of the control group (p<.05). In the experimental group, the VAS decreased significantly after one month (p<0.05), and the ODI decreased significantly after two months (p<.05). CONCLUSION: Because active tailored exercise programs are effective in improving the pain and disability indices, it is necessary to actively implement such programs among manufacturing workers with musculoskeletal symptoms of the lower back.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.436-436
• /
• 2023

산업혁명을 거치면서 높은 화석연료를 사용하는 제조업 중심의 산업구조와 많은 자원을 필요로 하는 도시의 집중 현상으로 지구 온난화에 따른 이상기후 발생이 증가하고 있다. 이러한 기후변화는 홍수, 태풍, 폭염 및 폭설 등의 자연재해 발생 빈도 및 규모를 증가시켜 피해가 커지고 있다. 특히 인구 및 시설들이 집중해 있어 도시의 집중 현상은 이러한 재해에 더욱 취약한 구조가 됨에 따라 피해의 규모를 가중 시키고 있는 실정이다. 전 세계적으로 기후변화 문제의 심각성을 인식하고 이를 해결하기 위해 선신국에 의무를 부여하는 교토의정서(1997년) 채택에 이어, 선진국과 개도국이 모두 참여하는 파리협정(2015년)을 채택하였고 2016년 협정이 발효되었다. 파리협정의 목표는 산업화 이전 대비 지구 평균온도 상승을 2℃보다 아래로 유지하고, 나아가 1.5℃로 억제하기 노력하는 것을 강제하는 것으로 2050년까지 탄소 순배출량을 '0'으로 만든다는 탄소중립사회로의 전환이 본격적으로 시작되었다. 본 연구에서는 기후변화로 인한 물부족 및 수실오염과 같은 도시의 수자원 문제 해결을 위해 IoT 기반 센서 및 네트워크 기반 수자원 플랫폼을 개발하였다. 도시 수자원 시설 데이터를 기반으로 대체 수자원 확보 및 수요 중심의 물 관리를 통해 효율적인 물 배분이 될 수 있도록 하였으며 이러한 스마트 물 관리에 따른 대체 수자원 확보 및 효율적 물 배분이 탄소 저감에 미치는 효과에 대해 분석하였다. 연구대상 지역은 세종 6-4구역으로 LID 특화지구로 조성되었으며 1,000 세대의 주민이 생활하는 공동주택이다. 물 순환(LID) 시설에서 확보된 물을 물 공급 시설과 연계하여 공동주택에서 활용함으로써 감소된 상수 사용량을 온실가스 배출량으로 환산하여 탄소 저감량을 계산하였다. 실제 주민들(1,000세대)이 사용하고 있는 상수량 데이터와 전력거래소 온실가스 배출계수를 활용하였으며 물순환(LID) 시설로 확보하여 대체할 수 있는 상수량은 10%로 가정하였다. 연구대상 지역(1,000세대)의 연간 상수공급량은 331,603m³이며, 연간 전력사용량은69,637kWh이다. 온실가스 배출량은 31.963tCO₂eq이며, 온실가스 저감량은 3.2tCO₂eq로 산정되었다. 추후 LID 시설에 대한 상수 대체량과 온실가스 저감효과 정량화가 필요하다.

• Analytical Science and Technology
• /
• v.26 no.5
• /
• pp.315-325
• /
• 2013

The possibility of acute hepatotoxicity caused by dimethylformamide (DMF) requires regular monitoring of the workers who are using DMF to prevent the occupational disease. The authors performed ambient and biological monitoring of workers involved in synthetic leather manufacturing processes using DMF to assess the correlation between the markers of ambient and biological monitoring of DMF. The authors monitored 142 workers occupationally exposed to DMF from 19 workshops in the synthetic leather and ink manufacturing industries located in northern region of Gyeonggi-do. The subjects answered questionnaire on work procedure and use of personal protective equipment to be classified by exposure type. DMF in air samples collected using personal air samplers, diffusive and active sampler, was analysed using gas chromatograph-flame ionization detector (GC-FID) with DB-FFAP column (length 30 m, i.d. 0.25 mm, film thickness 0.25 ${\mu}m$). Urinary N-methylformamide (NMF) was analysed using gas chromatograph-mass selective detector (GC-MSD) at selected ion monitoring (SIM) mode with DB-624 column (length 60 m, i.d. 0.25 mm, film thickness 1.40 ${\mu}m$). Geometric mean (GM) and geometric standard deviation (GSD) of the ambient DMF was $6.85{\pm}3.43$ ppm, and GM and GSD of urinary NMF was $42.3{\pm}2.7$ mg/L. The ratio of subjects with DMF level over 10 ppm was 44%, and those with urinary NMF over 15 mg/L was 87%. NMF in urine adjusted by DMF in air was $4.61{\pm}2.57$ mg/L/ppm and $9.50{\pm}2.41$ mg/L/ppm, respectively, with or without respirator. There was seasonal differences of NMF in urine adjusted by DMF in air, $7.63{\pm}2.74$ mg/L/ppm in summer and $4.53{\pm}2.29$ mg/L/ppm in winter. The urinary NMF concentration which corresponds to 10 ppm of ambient DMF was 52.7 mg/L (r=0.650, n=128). Considering the difference of the route of exposure which resulted from the compliance of wearing personal protective equipment, the estimated contribution of respiratory and dermal exposure route for DMF was 48.5% vs. 51.5%.