• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.9
• /
• pp.13-19
• /
• 2018

Effects of multiwall carbon nanotube (MWCNT) type and flow type (shear and elongational flow) on the electrical conductivity of polycarbonate (PC)/ MWCNT nanocomposites were investigated. Two different MWCNTs produced a huge difference in electrical conductivity in an injection molded PC/MWCNT nanocomposite. It was observed that MWCNTs having a higher aspect ratio provide much lower electrical conductivity in injection molded PC/MWCNT nanocomposites while the conductivities of compression molded samples from two different MWCNTs were the same. We found that this is due to a difference in the deformability of the two MWCNTs. As the aspect ratio of the MWCNT increases, the orientation of MWCNT by the external force becomes easier and the conductive path diminishes. Consequently the conductivity of the nanocomposites decreases. Nanocomposite samples prepared at a higher extensional rate and shear rate showed lower electrical conductivity. This is also attributed to the flow induced orientation and reduced conductive path of the MWCNTs. The experimental results were discussed in relation to variation in the tube-tube contact due to the change of the MWCNT orientation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.6
• /
• pp.491-497
• /
• 2017

In recent years, 3D printing has received increasing attention due to its potential for direct fabrication beyond the traditional rapid prototyping. 3D printing has the advantage of being able to manufacture complicated shapes that were thought impossible to produce by traditional manufacturing processes. This advantage has driven applications of 3D printing to direct manufacturing of functional parts, such as lightweight structures and component integration. In this study, a porous shell structure is designed for the purpose of weight reduction and ventilation. Finite element (FE) analyses are performed to compare the effective stiffness of the porous structure with the conventional solid structure. Structural reinforcements are also considered in order to make up the stiffness reduction due to the porosity, and the relevant FE analyses are performed to investigate the effect of the reinforcement design on the bending stiffness. The optimized reinforced structure is then proposed through response surface analysis.

• Clean Technology
• /
• v.13 no.2
• /
• pp.127-133
• /
• 2007

Celite with enormous pore space inside can hold small molecules and can be well blended with polyethylene (PE) to make a Celite-PE film. Two types of Celite-PE film were prepared, one with Celite surface-treated with surfactant to reduce the hydrophilicity and another with plain Celite. The anti-rust chemical such as dicyclohexylamine, dicyclohexylamine nitrite, or diisopropylamine was allowed to permeate into celite pore in the film, and slowly evaporated to protect the packaged steel material from the rust for a long period of time. The chemical concentration in the different packaging film bags was analyzed by a gas chromatography for a month, and the anti-rust effect on iron labware was compared for a six month period. The Celite film was superior to PE film in anti-rust effect and the long-term anti-rust chemical evaporation.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.305-311
• /
• 2019

The acrylic copolymer was designed and prepared for soft lens with high content. The copolymers were prepared using 2-hydroxyethyl methacrylate(HEMA) as a monomer and ethylene glycol dimethacrylate(EGDMA), glycerol dimethacrylate(GD), or glycerol 1,3-diglycerolate diacrylate (GDD) as a cross linking agent. The water content for high water content lens was 46%, which was higher compared to general purpose of 36%. The contact angle decreased from 38.6 to 34.4, which appears hydrophilic surface. The tensile strength decreased from 0.1 Mpato 0.08, then again to 0.05 as hydrophilic properties of cross linking agents increased. No phase separation was observed in the cross section of lens using scanning electron microscope. The real-time infrared technique was used in photo-polymerization. The initial polymerization rate increased from 0.6 to 0.9, depending on crosslinking agent.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.6
• /
• pp.258-263
• /
• 2020

Silicon carbide (SiC) fibers mainly fabricated from polycarbosilane, a ceramic precursor, are applied as reinforcing materials for ceramic matrix composites (CMCs) because of their high temperature oxidation resistance, tensile strength, and light weight. In this study, continuous SiC fibers used to fabricate rope-type flexible heating elements capable of generating high-temperature heat (> 650℃). For high-efficiency heating elements, the resistance of SiC fiber rope was measured by 2-point probe method according to the cross-sectional area and length. In addition, the fabrication conditions of rope-type SiC fiber heating elements were optimized by controlling the oxygen impurities and the size of crystal grains present in the amorphous SiC fiber. As a result, the SiC fiber heating element having a resistance range of about 100~200 Ω exhibited an excellent power consumption efficiency of 1.5 times compared to that of the carbon fiber heating element.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.2
• /
• pp.434-440
• /
• 2021

This study aimed to understand the effects on the improvement of hair texture by producing a hair texture improvement agent with milk thistle oil, and then applying it to the damaged hair. Each sample before and after application was measured. To understand the effects on the improvement of hair texture, the tensile strength, absorbance with the use of methylene blue, and gloss were measured. In the results of measuring the tensile strength to understand the effects on the improvement of hair texture, In the results of analyzing the absorbance with the use of methylene blue, the value after application was decreased than the value before application. In the results of measuring the gloss, none of the samples showed huge differences. In the results of this study, the milk thistle oil showed the effects on the texture improvement of damaged hair.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.3
• /
• pp.377-385
• /
• 2015

This study was conducted to increase the shelf life of peeled-garlic by edible coating material such as carboxymethyl cellulose(CMC) with sodium benzoate, citric acid and lecithin. Peeled-garlic were stored in a storage chamber at $25^{\circ}C$ and were taken at regular intervals for analysis. The changes in weight loss, colour change, browning, decaying loss and texture of the coated samples with storage time were investigated in comparison with the uncoated samples to determine the delay in the deterioration time of the samples. The coatings contributed to a lower reduction in weight loss. The coatings decreased the browning and decaying loss loses in comparison to the uncoated peeled-garlic. It was possible to extend the storage period with lower weight loss until 32 days by coating peeled-garlic surfaces with emulsions containing CMC. It was found that the emulsion prepared using the mixture of lecithin, CMC, citric acid, sodium benzoate and water was suitable for the coating of peeled-garlic.

• Culinary science and hospitality research
• /
• v.22 no.2
• /
• pp.104-114
• /
• 2016

In this study, the quality characteristics of different drying methods of Cirsium setidens Nakai, which contains large amounts of biological substances, were investigated for the improvement of their practical use. During the drying period, the weight reduction was the highest with hot-air drying(82.7%). As for the general component and mineral contents analysis results of Cirsium setidens Nakai, there were no significant difference. Cyclic low pressure drying resulted highest amount of total phenolic components and 1,1-diphenyl-2-picrylhydrazyl (DPPH). Hence, cyclic low pressure drying method is the best method for enhancing antioxidant activity of Cirsium setidens Nakai.

• Journal of Science and Technology Studies
• /
• v.15 no.2
• /
• pp.229-262
• /
• 2015

Toxic tort cases have increased dramatically since the 1970s, as large technological systems, such as nuclear power plants and chemical factories, or mass-produced, high-tech products, had exposed citizens and consumers to dangerous substances. It was, however, difficult to establish causal connection between exposure and the alleged harms in many of the environmental, pollution, and product liability cases under the framework of tort law conception of causation and responsibility. Science and law was called upon to resolve such 'late modern' legal cases where true causes are hard to find, where no single explanatory factor is sufficient for explaining diseases like cancer. This article examines how plaintiffs in the Korean tobacco litigation mobilized such late modern tools in science and law, such as epidemiology and the allocation of the burden of proof, in the context of the global circulation of science and law. It further shows how a set of the scientific theories and legal arguments developed in order to cope with late modern risk played a central role in establishing a causation between smoking and cancer in 2011. This article suggests that STS scholars can fruitfully examine the interaction between science and law as a way to understand and engage with social and legal issues engendered by late modern risk.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1996.04a
• /
• pp.445-449
• /
• 1996

한 국가의 과학기술 수준은 그 국가의 현재와 미래를 짐작케 하는 가장 중요한 척도라고 해도 과언은 아니다. 이에 따라 각국은 기술발전을 기하기 위하여 다양한 과학기술 정책을 펴고 있으며, 이러한 정책의 성패 여부는 국가의 과학기술 수준 뿐 아니라 국가의 미래에 지대한 영향을 미치게 된다. 그러나 세계무역기구(WTO)의 출범에 따라 기존의 과학기술 정책에 대폭적인 수정이 불가피하게 되었다. WTO는 공정한 무역질서의 회복을 위한 제반 규율을 대폭 강화하고 있으며, 여기에는 과학기술 정책과 관련한 부분들도 많이 포함되어 있다. 이로 인해 기존의 과학기술 정책에 대폭적인 방향수정이 요구되었고, 각 관련기관에서는 이에 대한 다양한 대응책들을 제시하고 있으나, 이러한 대응책들은 주로 민간 분야와 관련한 것이어서 미흡한 감이 있다. 이는 민간 분야에 파급효과가 지대한 것으로 알려지고 있는 국방과학기술에 대한 정책이 고려되지 않았기 때문이다. 사실 선진국에서는 국방과학기술분야에의 투자를 통해 많은 효과를 얻고 있다. 또한 국방 분야에 대한 문제는 WTO 체제에서 예외로 인정하고 있어, 새로운 환경에 대한 좋은 대응책이 될 수 있다. 그러므로 국방과학기술 정책에 대한 고려가 없는 과학기술 정책은 완전한 정책이라고 할 수 없다. 본 연구에서는 WTO의 출범에 대한 대응방안으로서 국방과학기술 정책의 효율적인 집행을 제안하였다. 이를 위해 우선 WTO의 성격과 WTO 출범으로 야기되는 과학기술 정책및 특히 국방과학기술 정책의 운용시의 변화요인들을 조사하였다. 또한, 국방과학기술 정책의 파급효과를 조사하였으며, 일곱 가지 사용가능한 국방과학기술 정책 대안들을 식별하였다. 또한 식별된 정책 대안들간의 비교를 통하여 효율적인 국방과학기술 정책 방안을 제시하였다.. 문제점들은 HED (Human Engineerign Discrepance) 목록으로 정리하여 설계에 반영하도록 하였다.로 마음의 안정감, 몸의 긴장 이완에 따른 건강 상태 유지, 수업 집중도 향상 등이 나타났다. 위와 같은 종합 적 분석 결과에 따라, 본 연구는 제조 현장의 생산성 향상 및 품질 향상과 연계하여 작업자의 작업 집중도 향상, 작업자의 육체적, 심리적 변화에 따른 생산성 및 품질 향상 변화 정도 등의 산업공학(인간공학) 제 분야의 여러 측면에서 연구 및 적용이 가능하리라 사료된다.l, 시험군:25.90$\pm$7.16mg/d1, 47% 감소)를 나타내었으며, 시험군의 AUC는 대조군에 비해 39% 감소하였고, 혈중 아세트알데히드의 농도는 투여 60분후 시험군(3.96$\pm$0.07nmo1/$m\ell$)이 대조군(6.45$\pm$0,64nmo1/$m\ell$)에 비해 유의성 있는 감소(39%)를 나타내었으며, 시험군의 AUC는 대조군에 비해 48% 감소하였다 한편, 시험관내 에탄올 대사 효소에 대한 바이오짐의 효과를 검색해본 결과 바이오짐(2.0 $\mu\textrm{g}$/assay)에 의해 Aldehyde dehydrogenase(1.5unit/assay)의 활성이 14% 증가되었다. 본 연구의 결과로 볼 때, 비지니스 및 바이오짐은 음주 후 상승된 혈중 에탄을 농도 및 아세트알데히드의 농도를 현저히 감소시키는 효과가 있었다.량 보호 관리, 도시 소공원 개발, 역사 문화 공원 조성, 하천 공간 복원, 공원 시설 기능 개선, 이용 프로그램 개발, 공원 관리 개선, 환경 피해 녹지의 회복, 도시 환경 림 조성, 녹지