• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.6
• /
• pp.306-313
• /
• 2019

Owing to the present problems of air pollution and fossil fuel exhaustion, ongoing research has been actively focused on developing an electric actuator system that can utilize diverse energy sources without producing any exhaust gas. Since the motors of such electric vehicles generally rotate at a high speed, the initial acceleration capability required for an automobile is insufficient. In this study, the motor output was decelerated by the transmission; the initial acceleration of the vehicle was increased, and the motor size and weight were reduced. The driving motor and transmission, which each form isolated structures, were integrated to simplify the connector for input and output. By reducing the cooling system's capacity, a vehicle was designed and manufactured that represents a structural change in effective technology.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.245-251
• /
• 2018

Recently, as the importance of structural maintenance has been increased, studies on self - healing concrete technology are being actively carried out. On the other hand, test for evaluating the self-healing performance is not standardized yet. Although visual test is used as a basic method for measuring crack widths, it is difficult to observe the crack width inside the specimen, and there is a disadvantage that only the local measurement of the surface can be measured due to the inhomogeneous cracking characteristics. Although permeability test has been widely used as an indirect method for measuring crack width, there is a problem due to the viscosity of water, and also a possibility that the internal material of the specimen may be eluted during the test. In this study, we propose a crack width evaluation method using gas diffusion characteristics. Idealized straight cracks were fabricated by acrylic and the diffusion coefficients of specimens were analyzed with respect to crack width and thickness. The experimental results show that the crack width and the diffusion coefficient are in a linear relationship and that the thickness and diffusion coefficient are inversely related.

• 한국노년학
• /
• v.32 no.4
• /
• pp.1087-1099
• /
• 2012

The purpose of this paper is to examine how visuospatial ability affects the situation awareness for older drivers while driving. For this study, the Rey-Osterrith Complex Figure (ROCF) was used to measure the visuospatial ability of older drivers. The ROCF is used to measure visuospatial construct and memory abilities, and Real-Time Probes were used to measure the situation awareness with UC-win/Road simulation. Sixty drivers participated in this research (N = 30 older drivers, median = 70 years old and N = 30 younger drivers, median = 27 years old). Based on the results of this analysis, a repeated measure ANOVA was used to analyze the effect on each level of situation awareness related to visuospatial ability in driving. The results indicate that the visuospatial ability of older drivers serves as a crucial factor in determining the potential for older drivers to safely continue to drive. The results also imply the necessity of ROCF development to support and improve the visuospatial ability of older drivers.

• Korean Chemical Engineering Research
• /
• v.57 no.1
• /
• pp.58-64
• /
• 2019

This study presents a novel method for preparing monodisperse polyethylene glycol diacrylate (PEGDA) microparticles in a dispensing needle based microfluidic device. The microfluidic devices are manufactured by manually assembling various off-the-shelf products without using additional equipment. In this microfluidic device, the volumetric flow rates of the dispersed phase of PEGDA solution and the continuous phase of oil are controlled to generate monodisperse PEGDA droplets. The PEGDA droplet contains photo-initiator thus it is crosslinked to microparticle by photopolymerization at the ends of the device. The particle size is easily controlled by adjusting the volume flow rate and the size of the microfluidic device. The monodispersity of the particles is calculated by a coefficient of variation of 2.57%. To demonstrate the biological applications of PEGDA particles, cells are encapsulated and observed for proliferation and viability.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.695-703
• /
• 2019

In this paper, we propose a method to remove the circulating current which can occur in the parallel connection of the high voltage series connected battery module in the battery pack. The removal way is a method of inserting a module named VVSM (Variable Voltage Variable Module) using bidirectional DCDC converter and supercapacitor in place of one or some of the cascaded battery cells in the battery pack configuration. In this module, it operates like a battery cell that can be controlled at a desired voltage. VVSM is used to match the voltages of the cascaded battery modules very easily. To demonstrate the proposed method, a PSIM simulation for battery model is used. In addition, the module with only the battery cell connected in series and the module with the proposed VVSM are made, and the two modules were connected in parallel to measure the circulating current between the two modules. As a result, it was verified that the proposed method effectively suppressed the circulating current.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.1
• /
• pp.72-77
• /
• 2019

The display that provides information to us through the visual sense is a very important information transmission means by intuitively transmitting information, and the liquid crystal display (LCD) is the most widely used information transmission display. In this paper, we studied solvent assisted micromolding as an alternative for the rubbing that is essential to align the liquid crystals in LCD and successfully aligned the liquid crystal molecules by constructing the nanostructures on conventional polyimide alignment layer. When generating the nanostructures on the polyimide film, there was a competitive correlation between the dissolution effect of the polymer by the solvent and the capillary effect of the polyimide molecules into the nanostructures of the mold depending on the process temperature. It was possible to form nanostructures with high step by deriving the optimum temperature. These nanostructures were able to align the liquid crystal molecules uniformly and demonstrated that they could form a desirable pretilt angle.

• (The)Study of the Eastern Classic
• /
• no.43
• /
• pp.33-64
• /
• 2011

The historical drama played on TV in 2003, Daejanggeum is originally based on the short historical record of lady doctor of the palace from the [Jungjong record] of Josun. The drama mixed fiction and historic record well together draw enormous interest and became a novel, musical and animation for children. Also the location of shooting drama became a theme park to attract travelers and the name 'Daejanggeum' was used for products to create great additional value. Most of all, the drama then was exported to overseas and became the representing drama of Korea. Therefore, drama is the representing piece that proved the success of historic data with its application as various modern cultural contents. The analysis of success reason of showed the creation of new modern woman character, fresh selection of the item that suits well in the time of desiring wellbeing, the strong drama scenario with different story development compared to previous historic drama. Also, it used 'one source multi use' method prior to the broadcasting and prepared production of various cultural contents. This success of Daejanggeum means a lot from the point of 'modern acceptance of tradition' to tradition researchers.

• Korean Chemical Engineering Research
• /
• v.60 no.2
• /
• pp.289-294
• /
• 2022

Oil contained in domestic and industrial wastewater or marine spilled oil gives rise to severe environmental pollution issues such as water pollution and ecosystem destruction. The membrane filtration method as one of representative oil/water separation strategies has technological challenges such as membrane fouling and low separation rate. In this work, we devise a 3D-printed microhydrocyclone for oil/water separation by utilizing a digital lighting processing-based 3D printer. We demonstrate that the 3D-printed microhydrocyclone can effectively separate oil and water phases from oil-in-water emulsion.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.5
• /
• pp.669-676
• /
• 2022

Non-fungible tokens (NFTs) have the advantage of being able to reliably manage details after minting, but how can ideas be protected before being converted to NFTs? The use of NFTs to increase the value of digital assets is increasing, but the problem of creating and selling NFTs without the consent of the creator is also increasing. Existing methods for protecting creators include a method of using a traditional authentication system and a method of using a social network, but each has limitations. Therefore, in this study, an identity token utilization method is proposed as a way to supplement the existing limitations. When an identity token is used, a certified NFT is issued through an existing identity authentication authority, so the verification of the authenticity of the token becomes clear. In addition, in inheritance and transfer, it becomes possible to respond to legal problems related to the transfer of creative rights.

• Journal of Advanced Navigation Technology
• /
• v.27 no.1
• /
• pp.63-70
• /
• 2023

In this work, a capacitive wireless power transfer (C-WPT) system is presented for wireless sensor system (WSS) applications in marine propulsion shafts. For a single Q factor on both sides of the coupling capacitor and reactive power removal from the circuit, a double-sided LCLC converter and transformers topology are designed to drive the rotary C-WPT system for WSS on the shaft. Parallel-connected parallel plate rotating capacitors with a capacitance of 170 pF are designed and implemented for the C-WPT system on a snow rotating shaft. In the experimental results, the C-WPT system achieved a transmission efficiency of 66.67% with 7.8 W output power at 3 mm distance and 1 MHz operating frequency. Therefore, it was proved that the fabricated C-WPT system can supply power to the WSS of the rotating shaft.