• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.3
• /
• pp.287-294
• /
• 2008

This study proposes a novel method for in service evaluation of tension force of a prestressed 7-wire strand which is frequently employed for retrofitting bridge superstructure. The smart strand is made by replacing the straight king wire of the strand with an instrumented steel tube in which the FBG sensor is embedded. Since the strain of the smart strand can easily be measured using the sensor, it is possible to monitor tension force of the strand during the service. For the sake of demonstrating effectiveness of the proposed strand, we came up with a 7.0m long prototype with 2 FBG sensors, and it is applied as an external tendon to a 6.4m long and 0.6 high RC T-shaped beam. A loading-unloading test has been carried out, and estimated tension forces using the smart strand are compared with measured forces by load cell. The comparison showed that the proposed smart tendon is useful and accurate for monitering tension force of the prestressed tendon.

• Journal of Digital Contents Society
• /
• v.18 no.8
• /
• pp.1621-1626
• /
• 2017

This study conducts data visualization of common climax patterns of Korean blockbuster films to analyze shots and evaluate scene (subplot unit) arrangement. For this purpose, a model of editing patterns is used to analyze how many climax patterns a film contains. Moreover, a system, which automatically collects shot images and classifies shot sizes of collected data, is designed to demonstrate that a single scene is composed based on a climax pattern. As a scene is a subplot and thus its arrangement cannot fully be analyzed only by climax patterns, dialogues of starring actors are also used to identify scenes, and the result is compared with data visualization results. It detects dialogues between particular actors and visualizes dialogue formation in a network form. Such network visualization enables the arrangement of main subplots to be analyzed, and the box office performance of a film can be explained by the density of subplots. The study of two types comparison analysis is expected to contribute to planning, plotting, and producing films.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.165-170
• /
• 2005

In this paper, influences of a ultra wideband (UWB) antenna on impulse channel measurement are investigated in time domain (TD) and frequency domain (FD) as well. Firstly, impulse response of an UWB antenna is obtained and then using the result of impulse response of the UWB antenna, influences of the antenna on impulse radio channel is analyzed. Furthermore, using the impulse response of the UWB anenna, method of impulse radio channel analysis is presented by excluding the effect of the antenna from an impulse radio channel. For verifying the theory, a modified conical monopole antenna is designed for measuring impulse radio channel and its impulse response is obtained. After that, in order to investigate the effects of the UWB antenna on an impulse radio channel, multipath environments are set up in an anechonic chamber and transmission coefficient for each multipath environment is measured with an aid of vector network analyzer. Data measured in frequency domain is transformed into those in time domain by way of signal processing. Measurement shows that such properties of the antenna as dispersion and ringing affect impulse radio channel. Moreover, using the impulse response of the antenna, impulse response of only multipath channel is obtained.

• Journal of IKEEE
• /
• v.21 no.1
• /
• pp.7-12
• /
• 2017

This paper proposed the ESD protection circuit for the high-voltage applications with latch-up immunity and high area efficiency. The proposed circuit has high holding voltage compared to the conventional SCR by inserting the floating regions and applying the segmentation layout. It has the area efficiency is more higher due to the segmentation layout. The proposed circuit has the higher holding voltage of the 21.67V than the 3.39V of the conventional SCR. The electrical characteristics of the proposed circuit was investigated by TCAD simulator, and was proved through the fabrication by using the 0.18 BCD process.

• Journal of Korea Society of Industrial Information Systems
• /
• v.19 no.5
• /
• pp.9-14
• /
• 2014

Recently, various contents using human motion are developed in computer vision and game industries. If we try to apply human motion to application programs and contents, users can experience a sense of immersion getting into it so that the users feel a high level of satisfaction from the contents. In this research, we analyze human head motion using images captured from an webcam and then we apply the result of motion recognition to a game without special devices as an interface. The proposed method, first, segments human head region using an image composed of MHI(Motion History Image) and the result of skin color detection, and then we calculate the direction and distance by the MHI sequence. In experiments, the proposed method for human head motion recognition was tested for controlling a game player. From the experimental results we proved that the proposed method can make a gammer feel more immersed into the game. Furthermore, we expect the proposed method can be an interface of a serious game for medical or rehabilitation purposes.

• Journal of Broadcast Engineering
• /
• v.17 no.1
• /
• pp.17-25
• /
• 2012

In this paper, we propose a method of producing a stereoscopic image from multiple images captured from a monoscopic camera. By translating a camera in the horizontal direction, left and right images are chosen among N captured images. For this, image edges are extracted and a rotational angle is estimated from edge orientation. Also, a translational vector is also estimated from the correlation of projected image data. Then, two optimal images are chosen and subsequently compensated using the rotational angle as well as the translational vector in order to make a satisfactory stereoscopic image. The proposed method was performed on thirty-two test image set. The subjective visual fatigue test was carried out to validate the 3D quality of stereoscopic images. In terms of visual fatigue, the 3D satisfaction ratio reached approximately 84%.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.169-175
• /
• 2009

Microbial fuel cell (MFC) is a device to produce a electricity from the oxidation of organic materials using microorganism. Recently many researchers have been studying MFC which is focused as regeneration energy source. Previews studies have focused every each factor that influence the production of electric power. However they didn't study a lot about the correlation among the factors. In order to improve the MFC, we analysed the factors which influencing the generation of electric power of MFC. Also, we made a new compartment to verify the correlations among the factors efficiently. Based on the result obtained from the experiments in the laboratory, we analysed the factors and we suggested a new concept of waste water treatment system to produce electrical energy during the treatment of waste water.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.6
• /
• pp.34-43
• /
• 2008

The state-space average model is extended to buck-boost, and buck-boost topology switching mode DC/DC converters and modified to have higher precision without increment of computation. The modified model is used in continuous conduction mode(CCM) switching DC/DC converters and some significant conclusions are derived. This paper discusses the discontinuous conduction mode(DCM) modeling of DC/DC converter and critical characteristic using average model of switch. Average model of switch approach is expended to the modeling of boundary conduction mode DC/DC converters that operate at the boundary between continuous conduction mode(CCM) and discontinuous conduction mode(DCM). Frequency responses predicted by the average model of switch are verified by simulation and experiment. A prototype featuring 15[V] input voltage, 24[V] output voltage, and 24[W] output power using MOSFET.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.247-250
• /
• 2006

Maximizing the productivity in reactive ion etching, early detection of process equipment anomaly became crucial in current high volume semiconductor manufacturing environment. To address the importance of the process fault detection for productivity, support vector machines (SVMs) is employed to assist the decision to determine process faults in real-time. SVMs for eleven steps of etching runs are established with data acquired from baseline runs, and they are further verified with the data from controlled (acceptable) and perturbed (unacceptable) runs. Then, each SVM is further utilized for the fault detection purpose utilizing control limits which is well understood in statistical process control chart. Utilizing SVMs, fault detection of reactive ion etching process is demonstrated with zero false alarm rate of the controlled runs on a run to run basis.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.493-499
• /
• 2019

Seal is a tool to prove an individual or group. Guk-Sae and Eo-Bo uses typeface to represent their names or titles, which change from tensile to tensile and have varied from time to time. Although the Korean alphabet currently uses Hangul, it had used Chinese characters before Hun-Min-Jeong-Um was created in 1443. All seals and royal seal before the Korean Seal of State were made in Chinese characters. This thesis analyzes the concept of typography through the royal seal, and the subject of this study is 'Sugang Emperor' which is the only eight-letter version seal of the Joseon Dynasty's various royal seal. Bo-Yeong, which is shown in Bo-Myeon has artistic value with beautiful typeface and proportions, which is worth research. It examines the features of the Korean seal, analyzes and studies the typeface shape and features from the typographic perspective of the "Sugang Emperor Bo-Yeong," or writing.