• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.269-276
• /
• 2010

This study aims to extract manufacturing techniques by analysing metallurgical characteristics of the cast-iron pot from Bubjusa, examining corrosion status and microstructure with a optical microscope, SEM-EDS, micro vickers hardness tester and XRD. The microstructure analysis has presented that ferrite and partial portion of pearlite exist within the corroded outer layer. The analysis of the inner layer revealed that there is pearlite and graphite of feather shape. The one of the middle layer, which is placed between outer and inner layer, showed that corrosion has been heavily developed. Micro vickers hardness values range from 217Hv to 698Hv in constituent layers and such values lie within the ranges of the ancient iron relics. The result of EDS analysis for each microstructure presented that the outer layer has been more decarbonized than the inner layer. XRD analysis of iron corrosion compound revealed that Goethite and Hematite had been produced from the corrosive process of iron. The study concludes that the large iron pot was made by casting technique, and microstructure of inner layer had a gray cast iron. Outer layer has been decarbonized through repetitive process of heating and cooling. This results can be used as fundamental data for comparative study to reveal manufacturing techniques of large cast-iron pot.

• Journal of Conservation Science
• /
• v.28 no.4
• /
• pp.353-366
• /
• 2012

This study was interpreted the making techniques of the Four Guardian Statues in Wanju Songkwangsa Temple, and retained basic data necessary for conservation treatment and restoration of the same material by estimating the soil source. The molding clay used in the Statues showed a variety of material characteristics according to different layers. The first and mid layers estimated as the original molding clay are composed of the same kind of soil. The soil of the finish layer was also confirmed to be genetically similar to that of the first and mid layers, despite little discrepancy. The former restoration layer was inconsistent in material characteristics with the original molding clay in every result of analysis. As a result of gamma radiography, making techniques of the Statues were able to identify the figure of the frame connecting the woods of main pillar frame to sub-frame and steel wire with ㄷ-clamp, nails and straw ropes, and the molding clay constructed upon the frame. Meanwhile, provenance interpretation confirmed that the soil of the estimated provenance area is of the same origin as the soil of the finish layer, and therefore is an appropriate material for conservation treatment. This result will contribute to the research on making techniques of the molding clay Statues.

• Conservation Science in Museum
• /
• v.26
• /
• pp.83-182
• /
• 2021

This study summarized the results of the conservation treatment and investigation on the production method of the golden crown (Treasure No. 339) excavated from Tomb No. 129 (also known as Seobongchong Tomb) in Noseo-dong, Gyeongju-si, Gyeongsangbuk-do Province. The golden crown from Seobongchong Tomb was discovered during the excavations conducted by the Museum of the Government-General of Korea in 1926 during the Japanese colonial era. It is currently in the collection of the National Museum of Korea. A total of six Silla golden crowns have survived in Korea, among which the crown from Seobongchong Tomb is the only example with a dome-shaped hemispherical decoration attached with a bird ornament while otherwise showing the typical features of Silla crowns. The crown had been repaired following its excavation using metallic materials and adhesives, but due to the partial deformation and damage brought about by the repair materials, it required further conservation treatment. This article describes in detail the overall process of the conservation treatment and the restoration of the original form of the golden crown from Seobongchong Tomb, particularly the method of reinforcing the joints to secure the stability of the crown. It presents the characteristics of the crown's production as revealed in the investigation during the conservation treatment, and further analyzes the relationship of this crown from Seobongchong Tomb with other Silla crowns through a comparison of their production techniques. The investigation revealed that the crown was primarily decorated with golden sequins at the time of its production. At a later point some of the sequins in the upright ornament were replaced with comma-shaped jade beads and additional comma-shaped jade beads were added to the headband. In order to determine if such modifications to the decoration had occurred with other Silla crowns, the decoration of the six extant Silla golden crowns were investigated. The crown from Cheonmachong Tomb features traces of this same modification to the decoration and possesses other similarities with the crown from Seobongchong Tomb.

• Journal of Conservation Science
• /
• v.30 no.3
• /
• pp.307-315
• /
• 2014

The gold textile is Korean traditional weaving technique using the gold thread since 5th century. The making technique of gold thread was written in various references, but it is severed because the gold thread weaving equipment and sumptuous moods were forbidden in the early 18th century. There are some studies of traditional gold thread which are mainly about conservation treatment of cleaning and strength. To restore traditional gold thread, investigation of material and manufacturing technique is vitally required. The gold threads are composed of gold leaf, adhesive and base sheet. Gold leaf and base sheet are available for investigation because they are exposed to the surface, whereas adhesive is not easy to investigate because it is not exposed to the surface. In this study, samples are made of pure and impure gold, animal glue and lacquer, and various types of Hanji based on domestic and foreign references to compare materials for gold threads. As a result of morphological character and stability evaluation, the optimum materials for the restoration of gold threads are pure gold, animal glue and Dochimji(smoothing paper by beating). This study is expected to be basic data for manufacturing gold threads techniques and modernization of traditional gold threads hereafter research.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.701-711
• /
• 2021

This study identifies the structure and material characteristics of the mural paintings in Daeungjeon at Ssanggyesa temple in Jindo by conducting scientific research and analysis including microscope examination, SEM-EDS, XRD, particle size analysis, and others. According to the analyses, the murals were considered to be of a typical soil mural style for Korean Buddhist murals, given that the walls were made of sand and soil and the murals had layers consisting of wall layers and a finishing layer. However, some finishing layer used calcite, while some ground layer used zinc white beneath the thick paint. In addition, there were similar features to those found on the surfaces of oil paintings such as cracks along with the paint layer, high gloss on surfaces, and thick brush strokes in many areas. It was found that the walls on which the murals were painted were made of soil but that the paint layer was created based on the oil painting technique using drying oil. It determined that the murals were painted in a unique painting style that is rarely found in other typical Buddhist murals in Korea.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.2
• /
• pp.137-143
• /
• 2002

In this study we generated digital orthophoto from LIDAR data. To generate digital orthophoto, we make TIN from raw laser scanning data(XYZ point data) and compiled DSM from this TIN. In this procedure much noise appeared along the break lines in DSM and this can give bad effect to the quality of digital orthophoto. Therefore, we applied various techniques which can refine the break line. In the result, we concluded that the fusion of LIDAR DEM of lowland and extracted buildings was adequate to generating DSM. So we generated the digital orthophoto from DSM generated from this technique. In the result of quality test, the positional accuracy of this digital orthophoto was better than the positional accuracy of 1:5,000 map.

• Cartoon and Animation Studies
• /
• s.5
• /
• pp.500-503
• /
• 2001

연구 주제는 우리 모두가 성자하면서 느끼고 경험했을, 그러나 고단한 일상 속에 파묻혀 잊고 지냈을, 유년시절의 이야기를 조그마한 시골지역을 비경으로 잔잔하게 그려내는 데 초점을 맞추었다. 도시에서 이사온 한 초등학생에게 시골마을은 제대로 포장된 도로도, 이층집도 없는 곳이었지만 주변에는 친구들과 뛰어 놀기에 부족함이 없는 경이로움으로 가득 찬 곳이었다. 이때의 느낌과 에피소드가 여러 장면 속에 봄부터 겨울까지 일년 사계절을 배경으로 담겨져 있다. 이런 의도 속에서 각 그림의 주제와 등장인물간의 조화를 맞추며, 각각의 그림은 개별적으로 독립적인 이야기를 담고 있으면서도 전체적으로 서로 연관된 고향이라는 주제의 하나의 이야기이다. 독특한 표현세계의 추구를 위한 기법연구로 한국화 기법을 만화와 접목을 통해 동양적인 정서와 회화적인 표현이 접목된 만화를 연구함으로써, 대중성과 예술성이 보완된 작품을 시도하고자 하였다. 과정 속에서 본인은 전형적인 우리나라 시골 어린이들의 생생한 감정과 동작의 움직임, 각가지 얼굴표정과 제스처를 만화적인 기법으로 표현하고자 하였으며, 한편으로는 그림의 배경이 되는 우리의 자연과 산하를 동양화 기법으로 특징을 잡아내고자 노력하였다. 이와 함께 독자의 이해를 높이기 위해 매 장면마다 그에맞는 이야기를 나레이션 형식으로 삽입하여 평면 작품으로 제작하였고, 또한 그 작품을 CD-ROM 속에 담음으로써 영상화된 화면에서 제작하고자 하였다. 이번 작품 제작을 통하여 본인의 의식 깊은 곳에 영향을 주고, 낳고 키워준 고향의 이야기들을 표현함으로 본인을 포함한 도시생활에 찌들어 있는 현대 대중들에게 위로와 휴식을 줄 수 있는 작품이 되고자 노력하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.4
• /
• pp.107-113
• /
• 2020

A number of studies have been conducted on predicting software faults, but most of them have been supervised models using labeled data as training data. Very few studies have been conducted on unsupervised models using only unlabeled data or semi-supervised models using enough unlabeled data and few labeled data. In this paper, we produced new semi-supervised models using tree algorithms in the self-training technique. As a result of the model performance evaluation experiment, the newly created tree models performed better than the existing models, and CollectiveWoods, in particular, outperformed other models. In addition, it showed very stable performance even in the case with very few labeled data.

• 한국문화재보존과학회:학술대회논문집
• /
• 2005.11a
• /
• pp.53-54
• /
• 2005

• 보존과학연구
• /
• s.12
• /
• pp.26-41
• /
• 1991