• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.33-40
• /
• 2008

Normally, cedar heartwood has a red color. However, it frequently changes black color (blackening phenomenon). It is reported that blackening phenomenon of cedar has been caused by oxidation of phenolics and norlignan extractives under weak alkaline conditions. In this study, heat treatment and UV irradiation were carried out to reduce the difference of color value between blackened wood and bright sap wood. Effects of temperature, moisture content, treatment time and light on decrease of color difference between blackened heartwood and sapwood were evaluated in each treatment. A decrement of different color value between blackened heartwood and bright sapwood by hot-water treatment was bigger than others. An effect of the vacuum drying was similar to that of the kiln drying. UV irradiation decreases the color difference between dried blackened heartwood and bright sapwood. It is suggested that UV irradiation could be used as final treatment to reduce the color difference on wood during drying process. Determination of optimum conditions and development of hybrid process for control of discoloration will be needed in a further study.

• Korean Journal of Animal Reproduction
• /
• v.25 no.1
• /
• pp.29-33
• /
• 2001

This study was conducted to investigate the effects of various estrus synchronization and seasonal breeding in Hanwoo. Delivery interval and number of service per conception were 412.9 and 1.76 in the annual breeding and 376.59 and 1.48 in the seasonal breeding, respectively. The percentage of cows exhibiting estrus in PG $F_{2{\alpha}}$, PRID, CIDR and CnRH-PG $F_{2{\alpha}}$-GnRH were 68.1%(141/207), 71.42%(15/20), 56.8%(33/38) and 93.1%(216/232), respectively. A greater percentage of GnRH-PG $F_{ 2{\alpha}}$-GnRH treatment became pregnant(91.1%) than across all treatments(75.0%, 81.0%, 89.6%). The results show that GnRH-PG $F_{2{\alpha}}$-GnRH treatment f3r pregnant in Hanwoo seems to be more effective than the others.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.828-834
• /
• 2013

In this paper, TMC (Tracker Motion Controller) as one of the many research methods for condensing efficiency improvements can be condensed into efficient solar system configuration to improve the power generation efficiency of the castle with Concentrated solar silicon and photovoltaic systems (CPV)experiments using PV systems. Microprocessor used on the solar system, tracing the development of solar altitude and latitude of each is calculated in real time. Also accept the value from the sensor, motor control and communication with the central control system by calculating the value of the current position of the sun, there is a growing burden on the applicability. Through the way the program is appropriate for solar power systems and sensors hybrid-type algorithm was implemented in the ARM core with built-in TMC, Concentrated CPV system compared to the existing PV systems, through the implementation of the TMC in the country's power generation efficiency compared and analyzed. Sensor method using existing experimental results Concentrated solar power systems to communicate the value of GPS location tracking method hybrid solar horizons in the coordinate system of the sun's azimuth and elevation angles calculated by the program in the calculations of astronomy through experimental resultslook clear day at high solar irradiation were shown to have a large difference. Stopped after a certain period of time, the sun appears in the blind spot of the sensor, the sensor error that can occur from climate change, however, do not have a cloudy and clear day solar radiation sensor does not keep track of the position of the sun, rather than the sensor of excellence could be found. It is expected that research is constantly needed for the system with ongoing research for development of solar cell efficiency increases to reduce the production cost of power generation, high efficiency condensing type according to the change of climate with the optimal development of the ability TMC.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.657-666
• /
• 2017

In this study, factor analysis was performed to reduce the friction in the elevation motion of a stand for a 50-inchtelevision. Pipe type cross-section control was used for accurate positioning control of the piston rod. The pipe type was also compared with a labyrinth-type crosssection for the orifice. The frictional force was then reduced using gas seal lip technology. Specifications were chosen, and a volume compensation experiment was carried out using an apparatus for compensating the volume of the cylinder, which is compressed by the volume of the piston rod. Based on CAE and experimental considerations, the labyrinth-type orifice is preferred for reducing friction. For the gas seal lip technology, outer and inner diameters of ${\Phi}20$ and ${\Phi}8$ for the hollow rod were more appropriate when assuming the weight of a 50-inch television to be 30kgf. The third is that the result of total consideration in stability problem and performance of volume compensation for specification decision and volume compensation experiment is determined the final speculation of hollow rod ?8x?4 and riveting system. The last is that the labyrinth orifice is not founded that of the ${\O}0.4{\sim}0.6$ orifice both tests on 300 mm intervals.

• Journal of Korean Society of Transportation
• /
• v.18 no.5
• /
• pp.83-97
• /
• 2000

The traffic management schemes through traffic signal control and information provision could be effective when the link-level data and trip-level data were used simultaneously in analysis Procedures. But, because the trip-level data. such as origin, destination and departure time, can not be obtained through the existing surveillance systems directly. It is needed to estimate it using the link-level data which can be obtained easily. Therefore the objective of this study is to develop the model to estimate O-D demand using only the link flows in highway network as a real time. The methodological approaches in this study are kalman filer, least-square method and normalized least-square method. The kalman filter is developed in the basis of the bayesian update. The normalized least-square method is developed in the basis of the least-square method and the natural constraint equation. These three models were experimented using two kinds of simulated data. The one has two abrupt changing Patterns in traffic flow rates The other is a 24 hours data that has three Peak times in a day Among these models, kalman filer has Produced more accurate and adaptive results than others. Therefore it is seemed that this model could be used in traffic demand management. control, travel time forecasting and dynamic assignment, and so forth.

• Journal of Bio-Environment Control
• /
• v.24 no.1
• /
• pp.39-44
• /
• 2015

To improve crop productivity with optimal water management in soilless culture, the information of physical characteristics of the root medium including water behavior should be required. The objectives of this study were to analyze the physical characteristics including hydraulic properties of the root media commercially used and to analyze the relationships between actual moisture content and measured one by FDR sensor. The weight of the medium was measured by load cell for calculating the actual moisture content. The accuracy of the moisture content measured by FDR sensor was obtained by comparing with the actual one. The water holding capacity of the coir was lower than those of the rockwool due to the features of large and rough particles of the coir. The moisture content measured by FDR sensor showed large difference from the actual moisture contents measured by loadcell, indicating that the calibration of FDR sensor is needed before starting measurement. The optimum range of moisture content for irrigation control was narrow in the coir than the rockwool due to the lower water holding capacity and rehydration capability of the coir. The results of this study can be useful in establishing adequate irrigation strategies in the soilless culture.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.91-103
• /
• 2008

In order to simulate the behavior of automated manufacturing systems, the performance of material handling systems should be measured dynamically. Multi-Agent technology could be well adapted for the development of simulator for distributed and intelligent manufacture systems. A multi-agent system is composed of one coordination agent and multiple application agents. Issues in AGVS simulator can be classified by the set-up and operating problems. Decisions on the number of vehicles, bi- or uni-directional guide-path, etc. are fallen into the set-up problem category, while deadlock tree algorithm and conflict resolution are in operating problem. In this paper, a multi-agent based deadlock-free simulator for automated guided vehicle system(AGVS) are proposed through the use of multi-agent technologies and the development of deadlock-free algorithm. In this AGVS simulator proposed, well-known Floyd algorithm is used to create AGVS Guide path, through which AGVS move. Also, AGVs avoid vehicle conflict and deadlock using check path algorithm. And Moving vehicle agents are operated in real-time control by coordination agent. AGV position is dynamically calculated based on the concept of rolling time horizon. Simulator receives and presents operating information of vehicle in AGVS Gaunt chart. The performance of the proposed algorithm and developed simulator based on multi-agent are validated through set of experiments.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2002.11a
• /
• pp.379-384
• /
• 2002

개발적인 측면에서 온라인 게임 환경에서의 NPC(Non Playable Character)들은 환경인식능력, 이동능력, 특수 능력 및 아이템의 소유 배분 등을 원활히 하기 위한 능력들을 소유해야 하며, 게임 환경을 인식, 저장하기 위한 데이터구조와 자신만의 독특한 임무(mission)를 달성하기 위한 계획을 갖고 행위를 해야 한다. 이런 의미에서 NPC는 자신만의 고유한 규칙과 행동 패턴, 그리고 목표(Goal)와 이를 실행하기 위한 계획(plan)을 소유하는 에이전트로 인식되어야 할 것이다. 그러나, 기존 게임의 NPC 제어 구조나 구현 방법은 이러한 요구조건에 부합되지 못한 부분이 많았다. C/C++ 같은 컴퓨터 언어들을 이용한 구현은 NPC의 유연성이나, 행위에 많은 문제점이 있었다. 이들 언어의 switch 문법은 NPC의 몇몇 특정 상태를 묘사하고, 그에 대한 행위를 지정하는 방법으로 사용되었으나, 게임 환경이 복잡해지면서, 더욱더 방대한 코드를 만들어야 했고, 해석하는데 많은 어려움을 주었으며, 동일한 NPC에 다른 행동패턴을 적용시키기도 어려웠다. 또한, 대부분의 제어권을 게임 서버 폭에서 도맡아 함으로써, 서버측에 많은 과부하 요인이 되기도 하였다. 이러한 어려움을 제거하기 위해서 게임 스크립트를 사용하기도 하였지만, 그 또한 단순 반복적인 패턴에 사용되거나, 캐릭터의 속성적인 측면만을 기술 할 수 있을 뿐이었다 이러한 어려움을 해소하기 위해서는 NPC들의 작업에 필요한 지식의 계층적 분화를 해야 하고, 현재 상황과 목표 변화에 적합한 반응을 표현할 수 있는 스크립트의 개발이 필수 적이라 할 수 있다 또한 스크립트의 실행도 게임 서버 측이 아닌 클라이언트 측에서 수행됨으로써, 서버에 걸리는 많은 부하를 줄일 수 있어야 할 것이다. 본 논문에서는, 대표적인 반응형 에이전트 시스템인 UMPRS/JAM을 이용하여, 에이전트 기반의 게임 캐릭터 구현 방법론에 대해 알아본다.퓨터 부품조립을 사용해서 Template-based reasoning 예를 보인다 본 방법론은 검색노력을 줄이고, 검색에 있어 Feasibility와 Admissibility를 보장한다.매김할 수 있는 중요한 계기가 될 것이다.재무/비재무적 지표를 고려한 인공신경망기법의 예측적중률이 높은 것으로 나타났다. 즉, 로지스틱회귀 분석의 재무적 지표모형은 훈련, 시험용이 84.45%, 85.10%인 반면, 재무/비재무적 지표모형은 84.45%, 85.08%로서 거의 동일한 예측적중률을 가졌으나 인공신경망기법 분석에서는 재무적 지표모형이 92.23%, 85.10%인 반면, 재무/비재무적 지표모형에서는 91.12%, 88.06%로서 향상된 예측적중률을 나타내었다.ting LMS according to increasing the step-size parameter $\mu$ in the experimentally computed. learning curve. Also we find that convergence speed of proposed algorithm is increased by (B+1) time proportional to B which B is the number of recycled data buffer without complexity of computation. Adaptive transversal filter with proposed data recycling buffer algorithm could efficiently reject ISI of channel and increase speed of convergence in avoidance burden of computational complexity in reality when it was experimented having

• Membrane Journal
• /
• v.29 no.6
• /
• pp.339-347
• /
• 2019

Forward osmosis (FO) is operated at a lower pressure than reverse osmosis (RO), which has great advantages in terms of fouling control, maintenance, membrane cleaning, and potential energy reduction. In particular, since the membrane fouling layer of the forward osmosis process has a relatively loose and dispersed property, it is possible to control the membrane fouling by physical cleaning, unlike the reverse osmosis process. However, existing studies do not apply the proper cleaning flow rate for forward osmosis physical cleaning, and thus there is a limit that the optimal operation can not be performed. Therefore, this study aims to evaluate the justification of proper flow rate that can show high efficiency cleaning with economical energy amount. The membrane fouling experiments of the forward osmosis process were maintained at a circulating flow rate of 8.54 cm/s and the recovery rates were compared with the three cleaning flow rates. As a result of this experiment, it was confirmed that the 2 × speed cleaning showed the same efficiency as the water permeability recovery rate of the 3 × speed cleaning, and it was confirmed that the 2 × speed cleaning was an appropriate flow rate with high cleaning efficiency and economical SEC.

• Environmental and Resource Economics Review
• /
• v.19 no.1
• /
• pp.101-127
• /
• 2010

The purpose of the research is to tackle proximity effects (PEs) when nonmarket valuation method CVM is applied to environmental goods such as tidal flats. 1,000 households are surveyed in the ratio of national household for the research. The sample are reclassified into five areas by 30-minute distance. Log-linear are used to analysis PEs in the research. On conclusion log-linear model regarding income effects proves that PEs are apparently represented in NMVMs(${\theta}_1$ >0. ${\theta}_2$ >0 and $dum1{\neq}0$, $dum2{\neq}0$, $dum3{\neq}0$, $dum4{\neq}0$) as a result of a 5 per cent significant level of t -test and F-test, finally rejecting the null hypothesis. In addition, WTP of area I respondents shows 26 per cent more then that of area V respondents, which is from \87,969 to \64,866 in the open-ended format. Finally, the research proves that the PEs in CVM are evidently represented with the econometric model, hence the PEs have to be embedded into the questionnaire of non-market valuation methods with the environmental goods to reduce the underestimation and improve the estimation accuracy.