• Title/Summary/Keyword: 제어 모듈

Search Result 1,917, Processing Time 0.029 seconds

Application Technology and Development of CAN Fieldbus Modules for Building Automation and Control System (빌딩자동제어시스템용 CAN 필드버스 모듈개발 및 적용기술에 관한 연구)

  • Hong, Won-Pyo;Seo, Young-Duk
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.18 no.6
    • /
    • pp.121-127
    • /
    • 2004
  • The controller area network(CAN) was originally developed to support cheap and rather simple automative applications, However, because of the its performance and low cost, it is also being considered in automated manufacturing and process control environments to interconnect intelligent devices, such as modem sensors and actuators. This paper presents a new application technology of the developed CAN control modules for the automated doors in building automation system Key pad and RF methods are used to open and close the automated door by the slave CAN module with CAN Protocol. BAS application technology of CAN field bus modules is also presented firstly in our nation.

Dimming Control module configuration using Zigbee in LED Lighting environment (LED 조명 환경에서 Zigbee를 이용한 Dimming 제어 모듈 구성)

  • Jang, Young-Ho;Kim, Hwan-Yong
    • Proceedings of the KAIS Fall Conference
    • /
    • 2012.05b
    • /
    • pp.502-506
    • /
    • 2012
  • 본 논문은 LED 조명 환경에서 Zigbee를 이용해서 Dimming 제어 모듈을 구성 하였다. 현재 사용되고 있는 LED 제어 모듈는 일반적으로 단일 출력을 사용하여 LED 조명의 일정한 밝기를 고정 출력이 되도록 사용되어지고 있다. 본 논문에서 구성된 무선 통신 모듈은 Zigbee를 이용하여 실내 환경에서 측정된 조도값을 무선으로 전송하도록 조도 센서 모듈을 구성 하였으며, 무선으로 전송된 조도값에 대한 출력을 제어하도록 구성하였다. MCU는 LED Driver IC를 이용하여 PWM 신호에 따라서 LED Driver IC에서 출력 전압을 변화하도록 하여 6단계의 밝기로 LED조명을 Dimming하도록 구성하였으며, 무선조도 센서는 10~15m의 거리에서 안정적으로 동작된다.

  • PDF

디지털 벡터모듈레이터 기반의 $2{\times}2$ GPS CRPA 패턴 제어기술

  • Kim, Jun-O;Bae, Jun-Seong
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • v.2
    • /
    • pp.411-414
    • /
    • 2006
  • 본 논문은 다양한 GPS 재밍대응 기술 중에서 안테나 기반의 CRPA(Controlled Reception Pattern Antenna) 시스템에 관한 소개 및 안테나의 널(null) 패턴 합성에 필요한 핵심 모듈인 디지털 I/Q 벡터모듈레이터(Vector Modulator)를 이용한 GPS용 $2{\times}2$ CRPA 패턴 제어방법에 관한 연구 내용이다. 일반적으로 시스템에서 미리 결정된 방향으로 만들어진 안테나 빔을 이용한 위상배열안테나(phased array antenna)와는 달리 CRPA 구조의 GPS 위성수신용 적응배열안테나(adaptive array antenna)는 각 안테나 소자(element)로부터 수신된 신호들을 실시간으로 해석하여, GPS 배열 안테나의 패턴 특성을 제어한다. 본 연구에서는 $2{\times}2$ 배열 정사각(square) 구조의 CRPA를 채택했으며, 재밍신호 방향으로 널(null) 패턴을 합성하기 위한 방법으로 PC에서 제어 가능한 DAC(Digital to Analog Converter)을 이용하여 I/Q 벡터모듈레이터로 인가되는 RF신호의 위상(phase) 및 진폭(amplitude)을 조절한다. 이때 원하는 널(null) 패턴이 합성되도록 네 개의 각 안테나 소자 쪽으로 8채널의 복소가중치(complex weight)를 인가한다.

  • PDF

Modular Current-Balancing circuit for Multi-channel LED driving (다중 채널 LED 구동을 위한 모듈형 전류 평형 회로)

  • Kim, Hyo-hun;Gu, Hyun-su;Han, Sang-kyoo
    • Proceedings of the KIPE Conference
    • /
    • 2015.07a
    • /
    • pp.393-394
    • /
    • 2015
  • 본 논문은 다중 채널 LED(Light Emitting Diode) 구동을 위한 모듈형 전류 평형 회로를 제안한다. 기존 방식은 DC/DC 컨버터단과 다중 채널 LED 전류제어를 위해 각 채널마다 일정한 전류 제어를 하는 LED 드라이버단의 직렬 연결로 구성된다. 하지만 제안회로는 캐패시터의 전하평형원리에 의해 단일 채널 전류 제어로 모든 채널의 LED 전류를 동일하게 제어할 수 있어 DC/DC 컨버터와 LED 드라이버단을 하나로 통합한 단일 전력단 LED 구동회로 구성이 가능하며, 이는 회로구성의 단일화로 소자수 및 사이즈의 소형화가 가능하다. 또한 수동소자만으로 이루어진 모듈형 회로로써 모듈의 추가에 따라 요구되는 LED 채널 수 만큼 다채널 모듈로 확장할 수 있다. 제안회로의 타당성 검증을 위해 1kW급 LED 구동회로에 적용한 시뮬레이션 결과를 제시한다.

  • PDF

Active and Reactive power Control of Modular Multi-level Converter for HVDC Application (직류송전 적용을 위한 모듈형 멀티레벨 컨버터의 유·무효 전력제어)

  • Kim, Do-Hyun;Yang, Won-Mo;Yu, Seung-Yeong;Han, Byung-Moon
    • Proceedings of the KIPE Conference
    • /
    • 2015.11a
    • /
    • pp.59-60
    • /
    • 2015
  • 본 논문에서는 직류송전 적용을 위해 전력계통과 연계된 모듈형 멀터레벨 컨버터(Modular Multi-level Converter)의 유 무효 전력제어에 대해 시뮬레이션 모델을 개발하고 그 특성을 분석하였다. 분석에 고려한 모듈형 멀티레벨 컨버터는 한 암당 12개의 서브모듈로 구성되어 있고 모듈레이션은 NLC (Nearest Level Control) 방식을 사용한다. 또한 DC 커패시터의 밸런싱은 버블소팅 방식을 적용하였고 순환전류를 억제하는 알고리즘을 고려하였다. 시뮬레이션을 통해 분석한 유 무효전류제어를 실험적으로 검증하기 위해 10kVA DC 1000V 하드웨어 축소모형을 제작하고 실험을 실시하였다. 실험결과는 시뮬레이션 결과와 일치함을 확인할 수 있었다. 향후에는 교류전압 불평형 보상과 순환전류 제어, 컨버터 보호에 대한 다양한 알고리즘을 도출할 예정이다.

  • PDF

Design of the Crane position control System using GPS and USN (GPS와 USN을 이용한 크레인 위치제어 시스템 설계)

  • Lim, Su-Il;Nam, Si-Byung;Lim, Hae-Jin
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.10 no.7
    • /
    • pp.1520-1525
    • /
    • 2009
  • In this paper, we study and simulate the suggested position control system using GPS and USN to replace the existing control system of a crane. For the correct approach, the position control system of a crane is divided into the control system of the ground station and the mobile station The hardware is comprised of GPS receiving module to receive the position control data of a crane from GPS satellites, bluetooth communication module for the data communication between the ground station and the mobile station, supersonic sensor module for a precise position control of a crane, motor to replace a crane roller, embedded MCU(ATmega128L) and so on. In here, an embedded MCU controls GPS receiving module, bluetooth communication module and supersonic sensor module. The Software is comprised of three programs. Three programs are the program to filter GGA output part in a receiving data of GPS receiving module, the driving program for supersonic sensor module, the digital map program to monitor a crane location. From the simulation results, it is demonstrated that the proposed system has the capability of crane position control with 1cm precision.

Digital Load Sharing Method for Converter parallel Operation (컨버터 병렬운전을 위한 디지털 Load Sharing 기법)

  • Yoo, Kwang-min;Kim, Won-yong;Park, Seng-hee;Lee, Dong-hoo;Kim, Yun-Sung;Jeong, Yu-seok;Lee, Jun-young
    • Proceedings of the KIPE Conference
    • /
    • 2011.07a
    • /
    • pp.457-458
    • /
    • 2011
  • 본 논문에서는 2KW급 LLC 컨버터를 적용한 전원장치의 병렬운전 및 Load Sharing 기법을 제안한다. 각 모듈의 제어기로는 TI사의 TMS320F28035를 사용하였으며 모듈 각각의 독립적인 전압제어를 담당한다. 그리고 Load Share 모드에서는 CAN통신을 사용하여 각 전원장치의 전류제어 및 전압제어를 수행한다. 각 모듈에 전체전류의 1/N의 균일한 전류를 흐르게 하여 각 모듈에 임피던스 불균형으로 인한 스트레스를 줄일 수 있다. 기존방식은 마스터(Master) 모듈의 지령치에 따라 슬레이브(Slave)모듈에서 부한 분담을 수행하는 반면, 제안된 Load Share 알고리즘은 멀티 마스터(Multi-Master: MM) 방식으로써 각 모듈의 평균전류를 레퍼런스로 갖는 구조로 정확한 부하분담을 수행한다.

  • PDF

A Design of Transceiver Module for Wire and Wireless Robust Security System (로버스트 유무선 보안시스템을 위한 송수신 모듈의 설계)

  • Park, Sung Geoul;Lee, Jae Min
    • Journal of Digital Contents Society
    • /
    • v.17 no.3
    • /
    • pp.173-180
    • /
    • 2016
  • In this paper, a design of transceiver module for real-time wire and wireless robust integrated security system to solve the problem of conventional security system and its transceiver module is proposed. The presented robust integrated security system is designed with RF control unit and wireless transceiver module. A RF controller in transceiver module works as a low-power RF transceiver system. It is designed to use specific bandwidth stored in registers and manipulate RF power of transceiver by accessing the random values of registers. Operation algorithm for RF transceiver module is also presented. The designed transceiver module and the operation algorithm are implemented and verified by experiments.

A Design and Implementation of Java Library for Multiple Access Control Models (다중 접근제어 모델을 위한 Java 라이브러리의 설계 및 구현)

  • Oh, Se-Jong
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.8 no.6
    • /
    • pp.1394-1401
    • /
    • 2007
  • Secure access control is a hot issue of large-scale organizations or information systems, because they have numerous users and information objects. In many cases, system developers should implement an access control module as a part of application. This way induces difficult modification of the module and repeated implementation for new applications. In this paper we implement a Java API library for access control to support system developers who use Java. They can easily build up access control module using our library. Our library supports typical access control models, and it can offer new types of access control. Furthermore, it is able to run multiple access control models at the same time.

  • PDF

A Implementation of the Digital Audio Mixer (범용 DSP를 이용한 디지털 오디오 믹서 구현)

  • 이규하;이지하;이기승;윤대희;이충용;박동희
    • Proceedings of the Korean Society of Broadcast Engineers Conference
    • /
    • 1997.11a
    • /
    • pp.95-99
    • /
    • 1997
  • 본 논문에서는 TI사의 범용 DSP인 TMS320C31을 이용하여 48KHz의 표본화주파수를 지원하고 20비트의 해상도를 갖는 방송용 디지털 오디오 믹서 시스템을 구현하였다. 전체 시스템은 4부분의 모듈로 구성된다. 아날로그 및 AES/EBU 디지털 포맷의 오디오 데이터를 입력받는 입력 모듈과 믹싱을 위한 믹싱 모듈, 처리된 데이터를 아날로그 및 디지털 포맷으로 출력하는 출력 모듈, 그리고 전체 시스템을 제어하는 제어 모듈로 구성된다.

  • PDF