• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.98-100
• /
• 1999

A thermal analysis was performed for the electromagnet which is installed in the control element drive mechanism(CEDM) of the integral reactor SMART. A model for the thermal analysis of the electromagnet was developed and theoretical bases for the model were established. It is important that the temperature of the electromagnet windings be maintained within the allowable limit of the insulation, since the electromagnet of CEDM is always supplied with current during the reactor operation. So the thermal analysis of the winding insulation which is composed of polyimide and air were performed by finite element method. The thermal properties obtained here will be used as input for the optimization analysis of the electromagnet.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2646-2648
• /
• 2002

This paper deals with a comparative evaluation of the reliability of control rod drive mechanisms including their driving methods for nuclear power plants. Basically there exist two types of electromagnetic-jack-type drive mechanisms in commercial use that are called as Control Rod Drive Mechanism and Control Element Drive Mechanism. Each type has corresponding drive sequence to make the movements of insertion and withdrawal. A state-space model is derived for each model graphically. Then the evaluation of the reliability is carried out on the programming tool called SHARPE. The evaluation does not give any meaningful numerical values for the reliability but just shows a relative degree to each other in view of reliability.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.343-350
• /
• 2002

The structural stability of pressure housing of SMART CEDM forming pressure boundary must be evaluated. In this paper, the stress and thermal analyses of the upper pressure housing of CEDM are performed for design pressure, hydraulic test pressure and thermal loading. Finite element and boundary condition were generated from the model which is made by I-DEAS program and the stress and thermal analyses were performed by ANSYS Program. The upper Pressure housing was analysed using 2D axisymmetric model because it is symmetry about an axis. The stress values obtained by analysis were compared with the stress intensity limit of ASME and KEPIC MNB standard.

• 대한전기학회논문지:전력기술부문A
• /
• 제52권4호
• /
• pp.147-147
• /
• 2003

This paper describes the finite element analysis(FEA) for the design of electromagnet for Control Element Drive Mechanism(CEDM) in System-integrated Modular Advanced Reactor(SMART) and compared with the lifting power characteristics of prototype electromagnet. A thermal analysis was performed for the electromagnet. A model for the thermal analysis of the electromagnet was developed and theoretical bases for the model were established. It is important that the temperature of the electromagnet windings be maintained within the allowable limit of the insulation. since the electromagnet of CEDM is always supplied with current during the reactor operation. So the thermal analysis of the winding insulation which is composed of polyimide and air were performed by finite element method. As a result, it is shown that the characteristics of prototype electromagnet have a good agreement with the results of FEA. The thermal properties obtained here will be used as input for the optimization analysis of the electromagnet.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.309-311
• /
• 2000

An advanced angular position detector (APD) for the SMART CEDM (control element drive mechanism) was designed. The APD is required to be small size with high resolution for angular displacement of rotary step motor. Unfortunately the proximity sensors can not be adopted to SMART CEDM because the motor shaft is located in the pressure boundary cylinder filled with the primary coolant under high temperature and pressure. This paper describes the electromagnetic finite element analysis for the design of advanced angular position detector for the SMART CEDM. The electromagnetic properties obtained will be used as Input for the optimization analysis of the APD.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.571-574
• /
• 2003

This paper proposes a detection method for mechanically stuck control rod drive mechanism (CRDM) faults. During the normal operation of a CRDM, disturbance voltage is induced due to the change of the airgap flux between the stator and the armature of a CRDM. This disturbance voltage is estimated by using $H_\infty$ filtering method, and generalized plant is used in linear fractional transform (LFT) framework. $H_\infty$ filtering is described and solved in terms of linear matrix inequalities (LMIs). Simulation results are shown.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.559-562
• /
• 2003

In this paper, we introduce a new method detecting thyristor faults of the power converter module in Control Rod Control System. When we control the currents in each coil of Control Rod Drive Mechanism by using the current control method, the current value can follow the current reference despite the faults like the missing phase or the diode acting. Comparing the fault current values with the normal current values, the bad transient characteristics of the abnormal current can make the operations of control rods incorrect. In this case, the information from the current trends cannot be enough to detect the fault occurrence in thyristors. Instead of the coil currents, the state of thyristors can be watched by measuring the coil voltages. In the existing system of Westinghouse type, the ripple detector takes charge of this task. But this detector has some shortcomings in the point of time for fault detection, we come to devise a new fault detection method solving the problems which belong to the ripple detector.

• 한국항행학회논문지
• /
• 제28권3호
• /
• pp.348-355
• /
• 2024

원전해체 시 대용량 처분시스템을 구동하거나 운영 중 제어봉 구동장치 제어시스템과 같은 대규모 측정전류를 요하는 중요설비를 측정 및 테스트하기 위해서는 측정 매체로서 안정적으로 전류를 공급할 수 있는 전류원이 필요하다. 그러나, 흔히 말하는 전원공급기는 전압원으로서 전압만을 내기 때문에 측정부하에 관계없이 일정한 전류를 공급할 수 있는 전류원 역할을 하지 못한다. 전류원은 전압원과 달리 제품을 만들기가 쉽지 않다. 원전 부품의 전류-전압 변환시험과 같은 건전성을 평가하기 위해서는 정상전류치보다 몇십배 훨씬 큰 수십 mA나 암페어 수준의 전류를 인가하여 테스트를 수행해야 하기 때문에 암페어(ampere) 단위의 전류를 공급할 수 있는 전류원이 필수적이다. 따라서 본 개발품에서는 이러한 필요에 의하여 입력이 전압으로 나타나는 전압원을 이용하여 측정대상에 원하는 전류를 일정하게 공급할 수 있는 전압제어으로서 대용량 전류를 공급할 수 있는 직류전압제어 대전류원을 개발하였다. 개발된 제품의의 신뢰성을 확인하기 위하여 원전에서 사용되는 실제의 데이터값을 적용하여 테스트하였으며, 그 결과를 분석하여 선택회로의 정당성을 입증하였다.

• 한국산학기술학회논문지
• /
• 제15권8호
• /
• pp.4742-4748
• /
• 2014

전북 익산시 R회사에서 기 개발된 세미오토 클러치는 수동클러치 차량의 기어 변속시 클러치 페달을 밟아야하는 불편함을 해소하고자 만들어진 장치로써 클러치 페달을 밟지 않고, 운전자가 기어봉에 위치한 스위치 조작만으로도 클러치 동작을 제어할 수 있다. 차량의 변속과정에서 클러치 동작을 제어하기 위해 센서를 설치하여 차량정보를 수집하여 제어하였다. 그러나, 센서 기반의 제어기는 열악한 운전조건에서 고장 원인이 되고 있으며, 차량에 설치하고 보수하는 과정에서 시간소요가 과다하여 많은 불편을 가지고 있었다. 이를 위해 본 연구에서는 차량의 ECU와 CAN통신을 통해 차량의 주행정보를 수집하여 제어하고, 공압 액추에이터로 클러치를 동작시키는 세미오토 클러치를 개발하였다. 개발된 공압 액추에이터의 정상적인 동작을 위해서는 최소 3bar이상이 요구되었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 학술대회 논문집 정보 및 제어부문
• /
• pp.270-272
• /
• 2005

In this paper, we proposed a new method detecting actions of some components driven by the coil excitation. Nuclear power reactors are typically controlled by the movement of several neutron-absorbing control rods into or out of the reactor core. For moving control rods, we use an electromagnetic-jack-typed mechanism, which is called Control Rod Drive Mechanism. This mechanism moves control rods by the step composed of sequential actions of components. In case any mechanical problems happen in the mechanism, the orders for the control rod movement from the higher system cannot be performed properly. This abnormal state must be monitored and the sequential actions of the components can be the monitoring target. The actions of components generate some deviations in the profiles of the currents flowing into the coils in the mechanism. We focused on this phenomena and devised a new method of detecting the actions of the components in Control Rod Drive Mechanism by using the wavelet transform for observing the current profile.