• 오토저널
• /
• 제7권3호
• /
• pp.56-63
• /
• 1985

The strength of the mounting bolt of a backing plate is investigated with field test to provide the basic data in the safety evaluation of the wheeled vehicle. As a result, during the braking performance test at a vehicle speed of 32km/h, the shearing stress of mounting bolt is 20.5kg/mm$^{2}$ because the translatory mass of the vehicle is increased 21.6 per cent to incorporate the rotating-mass effect of wheels and other permanently engaged rotating parts.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.2024-2027
• /
• 2005

This study was aimed to prove the safety of rubber-tired AGT light rail vehicle, which was designed to have the redundant equipment for safety, so the experiment of this paper was operated in condition of malfunction which we made such as bake sequence test and momentary interruption test. The result can bes handled by Labview 7.0 and showed as the graph.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 추계학술대회 논문집
• /
• pp.652-658
• /
• 2000

TCMS(Train Control ＆ Management System) control monitor and test the main on-board equipments including propulsion/brake unit by the serial transmission line. TCMS reduces interface circuits and number of train lines by the software logic and utilizing serial communication method. This paper describes the method of powering and braking control by TCMS software logic, and the software logic is verified by running test at Seoul Subway Line＃ 6. By running test result, we can see TCMS successfully control Powering/Braking of train

• 한국철도학회논문집
• /
• 제7권2호
• /
• pp.120-124
• /
• 2004

Computer aided simulation is an essential part in planning, design, and operation of railway systems. To determine the adequate performance and specification of railway system, it is necessary to calculate train performances such as distance, speed, power during train's running. This paper presents result of train performance simulation using the program that developed for Korea high speed train. To verify result of simulation, we have compared that with experiment data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.227-228
• /
• 2004

궤도회로를 사용하지 않고 무선통신을 이용하여 지상-차상간 정보를 송수신하고 열차속도를 제어하는 CBTC 시스템에서, CBTC 차상장치와 추진제어장치와 제동제어장치, 출입문 개폐장치 등의 차량내 각종 차량제어장치들간의 인터페이스를 죄 적화하기 위한 방안에 대하여 검토하였다. 또한 현재 국가연구개발사업으로 추진중인 경량전철 신호제어시스템 개발에 적용하여, 시스템 최적화를 통한 시스템 설계 및 시험평가에 적용하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.229-230
• /
• 2004

궤도회로를 사용하지 않고 무선통신을 이용하여 지상-차상간 정보를 송수신하고 열차속도를 제어하는 CBTC 시스템에서, CBTC 차상장치와 추진제어장치와 제동제어장치, 출입문 개폐장치 등의 차량내 각종 차량제어장치들간의 인터페이스를 최적화하기 위한 방안에 대하여 검토하였다. 또한 현재 국가연구개발사업으로 추진중인 경량전철 신호제어시스템 개발에 적용하여, 시스템 최적화를 통한 시스템 설계 및 시험평가에 적용하였다.

• 한국안전학회지
• /
• 제8권2호
• /
• pp.23-29
• /
• 1993

In this study, the method of deciding simulation test conditions is developed by computer program compared to actual vehicle test as accurately as possible. These results of analytical test conditions are conformed by simulation test using the brake dynamometer by comparison with test results of actual vehicle. Results of simulation test by these analytical results show good agreement with the vehicle test results. The analytical simulation test conditions provide the input data to brake dynamometer which follows : - each test inertia corresponding to braking deceleration - test condition of input control : brake line pressure - test condition of output control : braking torque

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.213-216
• /
• 2008

Sled test id widely used to evaluate the performance of occupant's safety system in frontal crash environment without having to conduct a full-scale crash test. Steel bar breaking system is used to generate deceleration profile which is experienced by passengers in frontal crash. In this study, deformation analyses of steel bars were conducted using a commercial FE code. Several guidelines were proposed to improve the accuracy of simulation.

• 한국항공우주학회지
• /
• 제45권4호
• /
• pp.292-299
• /
• 2017

한국형 기동헬기(KUH-1)에 적용된 휠 브레이크 조립체는 브레이크 계통 구성품으로 조종사의 임무 수행에 핵심적인 장비이다. 휠 브레이크 조립체는 항공기의 안전한 착륙성능을 만족시키기 위해 항공기 활주이동, 차동 제동 및 주기 제동 기능이 요구된다. 그러나 KUH-1 양산 운용 중에 타이어 스키드와 마모 현상이 발생하였으며, 해당 결함 발생 시 더 이상 비행을 할 수 없기 때문에 항공기 가동률 저하에 큰 원인이 된다. 본 논문에서는 휠 브레이크 조립체의 운용과정에서 발생한 결함사항의 발생 원인을 파악하고, 고장탐구 수행과정을 정리하였다. 또한, 고장탐구 내용을 바탕으로 도출한 설계개선 사항과 개선사항에 대한 비행시험 검증 결과를 함께 기술하였다.

• 한국군사과학기술학회지
• /
• 제20권5호
• /
• pp.597-607
• /
• 2017

The general control method for Anti-lock Brake System(ABS) is that the wheel slip ratio is observed and the braking force is controlled in real time in order to keep the wheel slip ratio under the value of the best slip ratio. When a wheel runs on the state of the best slip ratio, the ground friction of the wheel approaches the highest value. The value of best slip ratio, theoretically, is known as the value between 10 and 20 % and it is dependant on the ground condition such as dry, wet and ice. It is an important parameter for the braking performance and affects the braking stability and efficiency. In this thesis, an experimental method is suggested, which is a reliable way to decide the best slip ratio through dynamo tests simulating aircraft taxiing conditions. The obtained best slip ratio is proved its validity by results of aircraft taxiing tests.