• Title/Summary/Keyword: 정확해

Search Result 32,139, Processing Time 0.085 seconds

법률용어(3) - 흔히 사용되는 법률용어 해설(3)

  • 대한설비건설협회
    • 월간 기계설비
    • /
    • s.251
    • /
    • pp.56-57
    • /
    • 2011
  • 건설업을 영위하다 보면 소송 및 행정처분 등에서 법률용어를 자주 접하게 된다. 법률용어는 일상의 생활용어와 다르기 때문에 그 뜻을 정확히 알고 업무처리를 해야만 실수가 없다. 본지는 법률용어의 뜻을 정확하게 알고 사용하는데 도움을 주고자 '흔히 사용되는 법률용어 해설'을 게재하고 있다.

  • PDF

Correction of TDC Position for Engine Output Measuring in Marine Diesel Engines (선박용 디젤엔진의 출력산정을 위한 TDC 위치보정에 관한 연구)

  • Jung, Kyun-Sik;Choi, Jun-Young;Jeong, Eun-Seok;Choi, Jae-Sung
    • Journal of Advanced Marine Engineering and Technology
    • /
    • v.36 no.4
    • /
    • pp.459-466
    • /
    • 2012
  • The accurate engine output is basically one of important factors for the analysis of engine performance. Nowadays in-cylinder pressure analysis in internal combustion engine is also an indispensable tool for engine research and development, environment regulation and maintenance of engine. Here, it is essential more than anything else to find the correct TDC(Top Dead Center) position for the accuracy of engine output for diesel engine. Therefore this study is to analyze affecting factors to TDC position in 2-stroke large low speed engine and to suggest new method for determining correct TDC position. In the previous paper, it was mentioned that the accuracy of engine output is influenced by the determination of exact TDC position, and that 'Angle based sampling' method is better than 'Time based sampling' method in terms of precision. It was confirmed that there is 'Loss of angle', which is a difference between compression pressure peak and real TDC caused by heat loss and blow by of gas leakage. Consequently we invented new method, called "An improved method of time based sampling", which can obtain the correct engine output. The results by this method with compensating loss of angle was shown the same result by the 'Angle based sampling' method in encoder setting cylinder. This study is to suggest the new measuring method of exact engine output, and to examnine the reliance on the outcome.

Forward and Back Diffusion from Low Permeability Zone: A Review of Analytical Solutions with Different Boundary Conditions (저투수성 매체 내 오염물질의 정확산과 역확산: 경계조건에 따른 용질이동 해석해의 소개)

  • Kim, Changmin;Yang, Minjune
    • Economic and Environmental Geology
    • /
    • v.53 no.1
    • /
    • pp.99-110
    • /
    • 2020
  • It is a global trend to consider contaminated low-permeability zones as one of the primary management targets for the remediation of DNAPL contaminated sites. In addition, studies on the persistence caused by back diffusion of DNAPLs from low-permeability zones have been actively conducted worldwide. On the other hand, the studies for domestic groundwater contamination with the low-permeability zones are insufficient. Therefore, this study introduces the forward and back diffusions of DNAPL through low-permeability zones and suggests the importance of them by reviewing representative previous studies, especially on back diffusion and plume persistence. We proposed six diffusion scenarios and analytical solutions based on various boundary conditions of low-permeability zones. FI (forward diffusion into infinite domain) and BI (back diffusion form infinite domain) scenarios illustrate forward and back diffusion in which the depths of a low-permeability layer are assumed to be infinite. FFN (forward diffusion into finite domain with no flux boundary) and BFN (back diffusion from finite domain with no flux boundary) scenarios describe forward and back diffusion for a finite domain of a low-permeability layer with no flux boundary at the bottom. When the bottom of a low-permeability layer is considered as flux boundary, forward and back diffusion scenarios correspond to FFF (forward diffusion into finite domain with flux boundary) and BFF (back diffusion from finite domain with flux boundary). The scenarios and analytical solutions in this study may contribute to the determination of an efficient remediation method based on site characteristics such as a thickness of low-permeability zones or duration of contamination exposure.

Is the linguistic competence innate or constructive? - on the debate between J. Piaget and N. Chomsky - (언어 능력, 생득적인 것인가 구성적인 것인가? - 언어 능력에 대한 촘스키와 피아제의 논쟁을 중심으로-)

  • Moun, Jean-sou
    • Journal of Korean Philosophical Society
    • /
    • v.126
    • /
    • pp.79-108
    • /
    • 2013
  • Is the development of linguistic competence due to the learning process or the maturational process? According to Piaget, its development is a genuine learning process involving authentic constructions with gradual disclosure of new possibilities. But According to Chomsky, the acquisition of linguistic competence is due to a genetically conditioned maturational process. So it merely involves the actualization of a set of possibilities existing from the beginning Consequently, Piaget supposes that interaction with the environment plays a shaping role, while Chomsky allows it to have a mere triggering role. In broad respective, Chomsky supposes the rationalism that knowledge is largely inborn, while Piaget in the constructivist position which strives to find a middle course between radical rationalism and radical empiricism. In the one hand, an ultra-rationalistic concept such as 'fixed nucleus' supposed by Chomsky is, in my eye, nor plausible. In the other hand, if Piagetian constructivism is to be sustained, it must be sustained independently of its dubious biological fundament, and merely as a developmental psychological theory. In one word, we need to synthesize Piagetian cognitive approach and Chomskian syntactical, in order to explain exactly the source of human linguistic competence.

Study on improving the accuracy of automatic extraction from spatial information and land cover map (공간영상정보와 토지피복분류를 통한 피해지역 자동추출 정확도 향상에 관한 연구)

  • Seo, Jung-Taek;Kim, Kye-Hyun;Kim, Tae-Hoon
    • Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
    • /
    • 2010.09a
    • /
    • pp.72-76
    • /
    • 2010
  • 최근 들어 고해상도 항공영상을 활용한 공간정보의 구축 및 활용 사례가 증가하고 있으며, 기 구축된 공간정보의 정확도 향상을 위한 추가적인 노력이 필요시 되고 있는 실정이다. 이에 본 연구에서는 기존의 피해 전 후 항공영상을 이용한 피해지역 자동추출에 있어 결과물의 정확도 향상을 위하여 토지피복도와의 중첩을 통한 피해항목의 선택적 추출과 자동 추출된 결과물의 오차 제거가 가능하도록 하였다. 연구 대상지역은 2008년 7월 말 국지성 집중호우로 인하여 큰 피해를 입은 경상북도 봉화군 춘양면 일대를 선정하였으며, 집중호우에 상당히 취약하고 당시 사유시설 중 피해액이 가장 컸던 농경지에 대해 본 연구를 시범 적용하였다. 결과적으로 토지피복분류를 통해 피해 전 후 영상의 해상도 차이와 시계열적인 차이로 인해 발생하는 자동추출 결과물의 잡음 제거가 가능하였으며, 항공영상정보와 달리 육안으로 피해 항목의 선별이 어려운 자동추출 결과물에서 피해항목의 선별이 가능하였다. 이는 나아가 피해지역의 피해액 산출에 있어 보다 정확한 계산이 가능하게 하며, 추후 국가적 피해조사 사업에 있어 신뢰성 높은 피해정보 생산에 큰 기여를 할 것으로 사료된다.

  • PDF

Development and Evaluation of High-precision Earth-work Calculating System using Drone Survey (드론을 활용한 고정밀 토공량 산출 시스템 개발 및 평가)

  • Kim, Sewon;Kim, YoungSeok
    • Journal of the Korean Geosynthetics Society
    • /
    • v.18 no.4
    • /
    • pp.87-95
    • /
    • 2019
  • Earth-work calculation is the important data for estimating the optimal construction cost at the construction site. Earth-work calculations require the accurate terrain data and precise soil volume calculations. Drone surveying technology provides accurate topography in a short time and economic advantages. In this paper, a drone surveying technique was used to derive a high precision soil volume calculation system. Field demonstration were performed to verify the accuracy of the volume measurement system. The results of earth-work calculation using drone survey were compared with those of GPS surveying. In addition, the developed earth-work volume calculation algorithm is compared with the existing aerial survey software (Pix4D) to verify the accuracy.

A Novel Scheme to Depth-averaged Model for Analyzing Shallow-water Flows over Discontinuous Topography (불연속 지형을 지나는 천수 흐름의 해석을 위한 수심적분 모형에 대한 새로운 기법)

  • Hwang, Seung-Yong
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.35 no.6
    • /
    • pp.1237-1246
    • /
    • 2015
  • A novel technique was proposed to calculate fluxes accurately by separation of flow area into a part of step face which is dominated by flow resistance of it and an upper part which is relatively less affected by the step face in analyzing shallow-water flows over discontinuous topography. This technique gives fairly good agreement with exact solutions, 3D simulations, and experimental results. It has been possible to directly analyze shallow-water flows over discontinuous topography by the technique developed in this study. It is expected to apply the developed technique to accurate evaluation of overflows over weirs or retaining walls (riverside roads) and areas flooded by the inundation in the city covered in discontinuous topography.

Research about a game image 3D versification (3D 게임영상 작성법에 관한 연구)

  • Lee Dong-Lyeor
    • Journal of Game and Entertainment
    • /
    • v.1 no.1
    • /
    • pp.31-38
    • /
    • 2005
  • Correct flow of various game manufacture among the justice which is used at the game development. and The understanding about the manufacture regards we making rather correct game. We justice understanding which we are correct in the image manufacture to become the reason air control of the game and We put the center in a 3B game image manufacture understanding. we are marked in maneuvered the game in actual game good. The image of the back of Cut Scene which is inserted at an opeuning incomparableness event time, we have been produced in this method. The thing which a 3D game image is utilized in a special effectiveness image though it is different from the game in the theater movie, we are the graphic which a game manufacture o'clock must be considered. The reason air control which the game player Is rather correct, we are regarded we offer the reason to immerse with his game.

  • PDF

Optimal Criterion of Classification Accuracy Measures for Normal Mixture (정규혼합에서 분류정확도 측도들의 최적기준)

  • Yoo, Hyun-Sang;Hong, Chong-Sun
    • Communications for Statistical Applications and Methods
    • /
    • v.18 no.3
    • /
    • pp.343-355
    • /
    • 2011
  • For a data with the assumption of the mixture distribution, it is important to find an appropriate threshold and evaluate its performance. The relationship is found of well-known nine classification accuracy measures such as MVD, Youden's index, the closest-to-(0, 1) criterion, the amended closest-to-(0, 1) criterion, SSS, symmetry point, accuracy area, TA, TR. Then some conditions of these measures are categorized into seven groups. Under the normal mixture assumption, we calculate thresholds based on these measures and obtain the corresponding type I and II errors. We could explore that which classification measure has minimum type I and II errors for estimated mixture distribution to understand the strength and weakness of these classification measures.

추적자를 이용한 원전 주급수 계통유량 측정법

  • Lee, Seon-Ki;Jeong, Baek-Soon;Lee, Cheol-Eon;Lee, Hyun;Kim, Chang-Ho
    • Proceedings of the Korean Nuclear Society Conference
    • /
    • 1997.05a
    • /
    • pp.257-263
    • /
    • 1997
  • 원자력 발전소의 주급수 유량은 원자로 열출력 산출에 사용되는 중요한 변수로서 , 노심관리 뿐만 아니라 원자로 안전 운전에도 중요하며, 발전소 출력에 직접적인 영향을 미친다. 원자력발전소의 주급수 유량은 1% 의 허용오차로 설계되어 있으나, 사용년수의 증가 및 운전조건의 영향 둥으로 정확도의 유지가 어려운 실정이다. 주급수 유량을 정확도 $\pm$0.5% 이내로 측정한다면 1000 MW 급 원자력 발전소에서 최대 10MW 의 전기출력 복구가 가능하며, 이를 위해 주급수 유량 측정 설비의 정확도 검증과 보정을 할 수 있는 정확한 유량 측정법의 개발이 절실하다. 본 연구에서는 화학 추적자 방법에 의한 정밀 유량 측정기술을 개발하여, 원자력 발전소 주급수 계통의 유량 측정에 사용되고 있는 벤츄리(venturi), 노즐(nozzle), 오리피스(orifice) 등의 유량검증에 활용함으로서 발전소의 안전성을 유지하면서 동시에 출력을 극대화하는 것을 목표로 하여 추적자 이용 유량 검증기를 설계 제작하였으며 그 정확도와 유효성에 대한 실험적 검토를 하였다. 본 연구에서 사용한 추적자 방법은 유량 번동에 좋은 응답성을 보이고 있으며, 유량 측정에 있어서도 정확도 $\pm$ 0.5 % 이내의 매우 신뢰성 있는 측정이 가능하다.

  • PDF