• Food Science of Animal Resources
• /
• v.24 no.4
• /
• pp.349-354
• /
• 2004

Stress-susceptible pigs have been known as the porcine stress syndrome (PSS), swine PSS, also known as malignant hyperthermia (MH), is characterized as sudden death and production of poor meat quality such as PSE (pale, soft and exudative) meat after slaughtering. PSS and PSE meat cause major economic losses in the pig industry. A point mutation in the gene coding for the ryanodine receptor (RYR1) in porcine skeletal muscle, also known calcium (Ca$^{2+}$) release channel, has been associated with swine PSS and halothane sensitivity. We used the PCR-RFLP(restriction fragment length polymorphism) and PCR-SSCP (single strand conformation polymorphism) methods to detect the PSS gene mutation (C1843T) in the RYR1 gene and to estimate genotype frequencies of PSS gene in Korean pig breed populations. In PCR-RFLP and SSCP analyses, three genotypes of homozygous normal (N/M), heterozygous carrier (N/n) and homozygous recessive mutant (n/n) were detected using agarose or polyacrylamide gel electrophoresis, respectively. The proportions of normal, carrier and PSS pigs were 57.1, 35.7 and 7.1％ for Landrace, 82.5, 15.8 and 1.7％ far L. Yorkshire, 95.2, 4.8 and 0.0％ for Duroc and 72.0, 22.7 and 5.3％ for Crossbreed. Consequently, DNA-based diagnosis for the identification of stress-susceptible pigs of PSS and pigs producing PSE meat is a powerful technique. Especially, PCR-SSCP method may be useful as a rapid, sensitive and inexpensive test for the large-scale screening of PSS genotypes and pigs with PSE meat in the pork industry.y.

• Journal of Bio-Environment Control
• /
• v.11 no.4
• /
• pp.151-156
• /
• 2002

Root zone cooling, such as soil or nutrient solution cooling, is less expensive than air cooling in the whole greenhouse and is effective in promoting root activity, improving water absorption rate, decreasing plant temperature, and reducing high temperature stress. The heat transfer of a soil cooling system in a plastic greenhouse was analyzed to estimate cooling loads. The thermal conductivity of soil, calculated by measured heat fluxes in the soil, showed the positive correlation with the soil water content. It ranged from 0.83 to 0.96 W.m$^{[-10]}$ .$^{\circ}C$$^{[-10]}$ at 19 to 36％ of soil water contents. As the indoor solar radiation increased, the temperature difference between soil surface and indoor air linearly increased. At 300 to 800 W.m$^{-2}$ of indoor solar radiations, the soil surface temperature rose from 3.5 to 7.$0^{\circ}C$ in bare ground and 1.0 to 2.5$^{\circ}C$ under the canopy. Cooling loads in the root zone soil were estimated with solar radiation, soil water content, and temperature difference between air and soil. At 300 to 600 W.m$^{-2}$ of indoor solar radiations and 20 to 40％ of soil water contents,46 to 59 W.m$^{-2}$ of soil cooling loads are required to maintain the temperature difference of 1$0^{\circ}C$ between indoor air and root zone soil.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.1
• /
• pp.13-22
• /
• 2009

The composite resin, due to its esthetic quality, is considered the material of choice for restoration of anterior teeth. To get a satisfactory result in the composite resin restorations, it is necessary to choose right shade. At present, most of the commercial composite resins are based on the Vita Lumin shade guides or shade guides that are provided by their company, but color differences among them might be expected even using the same shade in various materials. This study is to measure color differences between various light-cured composite resins and shade guides and to provide the clinicians with information which may aid in improved color match of esthetic restoration. Four kinds of light-cured composite resins (Gradia Direct (GD), Z250 (Z250), Clearfil AP-X (AP-X), Esthet X (E X)) and shade guides with A2 and A3 shade were used. Three specimens of each material and one specimen of each shade guide were made. Each composite resin was filled into the Teflon mold (1.35 mm depth, 8 mm diameter), followed by compression, polymerization and polishing with wet sandpaper. Shade guides were grinded with polishing stones and rubber points to a thickness of approximately 1.35 mm. Color characteristics were performed with a spectrophotometer(color i5, GretagMacbeth, USA). A computer-controlled spectrophotometer was used to determine CIELAB coordinates ($L^*$, $a^*$, $b^*$) of each specimen and shade guide. The CIELAB measurements made it possible to evaluate the amount of the color difference values (${\Delta}E^*ab$) between composite resins and shade guides. CIE standard D65 was used as the light source. The results were as follows : 1. Among the $L^*$, $a^*$, $b^*$ values of most of 4 kinds of composite resin specimens which are produced by same shade, there were significant differences(p<0.05). 2. Among all 4 kinds of composite resin specimens which are produced by same shade, there were color differences that is perceptible to human eye(${\Delta}E^*>3.3$). 3. Between most of composite resin specimens investigated and their corresponding shade guides, there were color differences that is perceptible to human eye(${\Delta}E^*>3.3$). 4. In the clinical environment, it is recommended that custom shade guides be made from resin material itself for better color matching. Shade guides supplied by manufacturers or Vita Lumin shade guide may not provide clinicians a accurate standard in matching color of composite resins, and there are perceptible color differences in most of products. Therefore, it is recommended that custom shade guides be made from resin material itself and used for better color matching.

• Journal of Service Research and Studies
• /
• v.9 no.4
• /
• pp.41-62
• /
• 2019

In this intangible good-oriented, modern service economy era, we have to first understand the characteristics of the healthcare service in order to enhance the competitiveness of the healthcare industry and achieve continuous growth. In addition, service nature and characteristics should be reinforced so that connections can be made to the organizational job performance. To achieve the aforementioned results, this study analyzes the direct effects service nature and characteristics have on job performance in the healthcare industry and investigates the indirect effects with individual personality as the moderating effect. While conducting this study, a total of 340 healthcare workers were surveyed. Survey data from a total of 315 workers were used for analysis during empirical investigation of the research hypothesis. According to the analysis, it was proven that interactivity and horizontality among service nature and characteristics have a positive (+) effect on job effectiveness. This means that customer needs can be identified at customer touchpoints to quickly and accurately provide customers with the products and services they want, while horizontality among service nature and characteristics have a positive (+) effect on job effectiveness. This means that customer needs can be identified at customer touchpoints to quickly and accurately provide customers with the products and services they want, while horizontal communication enhance from department to department and from colleague to colleague within the organization can be linked to job performance. Also, with regards to the relationship shared between the customer or the patient, the job performance of healthcare workers may also improve if they provide customers with their desired service as an expert at the same level. In a rapidly changing healthcare environment, if the healthcare service nature and characteristics are put into practical use, it will be possible to propel the growth of hospitals and sustain it while investigating the moderating effects of individual personality, a partial moderating effect was observed for self-esteem and growth desire. As the study on service nature and characteristics came about only just recently, there is a needs for futher research. The study focuses on the healthcare service industry and hopefully, it will serve as a base study that can be applied to different service industries as well.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.4
• /
• pp.654-686
• /
• 2007

To estimate and analyze an interested science and technology level in any case requires three basic informations: (1) relative positions of our technology level, (2) other relevant technology level of the world best country holding the state of the art technology, and (3) its theoretical or practical maximum level within a certain period of time. Further, additional information from analyzing its respective rate of technology changes is necessary. It seems that most previous empirical or case studies on technology level have not considered third and fourth informations seriously, and thus critically have missed important findings from a dynamic point of view on the matter. A dynamic approach considering types of development processes and paths as well as current position needs an application of a concept of technology development stages and respective growth curves. This paper proposes a new method of approach and application by implementing relatively simple types of the growth curve(S-curve) such as logistic and Comports curves and applying estimation results of these curves to ten core technologies of the growth engines for the next future generation in Korea. The study implies that Korean science and technology level in general clearly gets higher as it approaches to a recent time of period, but relative technology gap from the world best in terms of catching-up period does not get better or narrower in case of at least part of the concerned technologies such as bio new drugs and human organs, and intelligence robots. The possibility does exist that some of our concerned technologies shooting for the next future generation may not come to the world highest level in the near future. The purpose of this study is to propose possibilities of catching-up, if any, by estimating its relevant type of growth pattern by way of measuring and analyzing technology level and by analyzing the technology development process through a position analysis. At this stage this study tries to introduce a new theoretical approach of estimating technology level and its application to existing case study results(data) from Korea Institute of Science and Technology Planning and Evaluation(KISTEP) and Korea Institute of Industrial Technology Evaluation and Planing(ITEP), for years of 2004 and 2006 respectively. The study has some limitations in terms of accuracy of measuring(estimating) a relevant growth curve to a particular technology, feasibility of applying estimated results, accessing and analyzing panel experts opinions. Hence, it is recommended that further study would follow soon enough to verify practical applicability and possible expansion of the study results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.24 no.5
• /
• pp.482-488
• /
• 2014

This paper aims to analyze user's emotion automatically by analyzing Twitter, a representative social network service (SNS). In order to create sentiment analysis models by using machine learning techniques, sentiment labels that represent positive/negative emotions are required. However it is very expensive to obtain sentiment labels of tweets. So, in this paper, we propose a sentiment analysis model by using self-training technique in order to utilize "data without sentiment labels" as well as "data with sentiment labels". Self-training technique is that labels of "data without sentiment labels" is determined by utilizing "data with sentiment labels", and then updates models using together with "data with sentiment labels" and newly labeled data. This technique improves the sentiment analysis performance gradually. However, it has a problem that misclassifications of unlabeled data in an early stage affect the model updating through the whole learning process because labels of unlabeled data never changes once those are determined. Thus, labels of "data without sentiment labels" needs to be carefully determined. In this paper, in order to get high performance using self-training technique, we propose 3 policies for updating "data with sentiment labels" and conduct a comparative analysis. The first policy is to select data of which confidence is higher than a given threshold among newly labeled data. The second policy is to choose the same number of the positive and negative data in the newly labeled data in order to avoid the imbalanced class learning problem. The third policy is to choose newly labeled data less than a given maximum number in order to avoid the updates of large amount of data at a time for gradual model updates. Experiments are conducted using Stanford data set and the data set is classified into positive and negative. As a result, the learned model has a high performance than the learned models by using "data with sentiment labels" only and the self-training with a regular model update policy.

• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.203-212
• /
• 2017

This research analyzed the factors that have the influences on the intentions to use the consumer dispute settlement system for the small- and medium-sized corporations. The consumer dispute settlement system is a general Internet information portal service which enables the small- and medium-sized corporations and the small businesses receive the support for the accurate damage handling method and the legal service through the Internet in their disputes with the black consumers or the consumers. With the small- and medium-sized corporation users who use the consumer dispute settlement system as the subjects, the research took a lot at what influences the consumer dispute settlement system has on the quality of the information, the quality of the system, the ease-of-use regarding which the environmental factors are perceived, and the ease that was perceived and, finally, what influences it has on the intention of the use. The accuracy, the convenience, and the costs of the consumer dispute settlement system had the positive influences on the ease-of-use that was perceived and the accuracy and the convenience, also had the positive influences on the usefulness that was perceived. Also, it was verified that the ease-of-use of the consumer dispute settlement system that was perceived and the usefulness of use of the consumer dispute settlement system that was perceived finally had the positive influence relationships with the intention of the use. It is highly expected that if, based on the results of this research, the quality of the consumer dispute settlement system is maintained and supplemented to fit the priority order, there will be the maintenance of, and the development toward, a system that is even more improved than the previously existent system.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.12
• /
• pp.1929-1936
• /
• 2014

This study investigated purchasing behaviors of processed foods in high school students (male 94 and female 85) in the Yongin region. Frequency of eating processed foods was generally once (36.9%) or twice (32.4%) a day. Frequency according to processed food items was in the following order: confectionary (31.3%)> beverages (17.3%)> breads (12.3%)> instant noodles (11.7%) and milk or dairy products (11.7%)> frozen desserts (10.6%). The places for purchasing were a big mart (30.7%), convenience store (28.5%), and school cafeteria (26.8%). The reasons for purchasing were 'tasty' at 43.6% and 'hungry' at 35.2%. Main factors affecting purchasing were 'taste' at 70.9%, followed by price (16.2%)> quantity (5.6%)> nutrition (4.5%). The most important parts of food and nutrition labels were 'shelf-life' (67.0%) and 'calories' (57.5%). Degrees of confirmation of food and nutrition labeling were 'always' (12.3%), 'rarely' (28.5%), and 'sometimes' (59.2%). The reasons for not reading labels were 'unconcerned' (27.9%), 'too tiny lettering' (28.5%), 'hard to understand' (16.2%), and 'habitually' (15.1%). These results reflect low attention of high school students towards healthy food choices using food and nutrition labeling during purchasing. In conclusion, a specific education program for providing accurate product information as well as leading healthy purchasing behaviors should be required.

• Advances in pediatric surgery
• /
• v.16 no.1
• /
• pp.1-10
• /
• 2010

The members of the Korean Association of Pediatric Surgeons conducted a retrospective study of two hundred and twenty-two cases of intestinal atresia for the period from January 1, 2007 to December 31, 2009. Seventeen hospitals were involved. There were 76 duodenal, 65 jejunal, and 81 ileal atresias (3 colonic). The male to female ratio was 0.85:1 in DA and 1.34:1 in JIA. Ninety-four patients(43.3 %) were premature babies (DA 40.3 %, JA 64.6 %, IA 28.8 %), and 70 babies (32.0 %) had low birth weight (DA 38.7 %, JA 44.4 %, IA 16.0 %). Antenatal diagnosis was made in 153 cases (68.9 %). However, 27 infants (17.6 %) with antenatal diagnosis were transferred to the pediatric surgeon's hospitals after delivery. Maternal polyhydramnios was observed in 81 cases (36.59 %) and most frequent with proximal obstruction. In forty-four cases (19.8 %), only simple abdominal film was taken for diagnostic study. The associated malformations were more frequently observed in DA - 61.8 % in DA and 22.6 % in JIA. Meconium peritonitis, small bowel volvulus and intussusception were more frequently associated with ileal atresia. The overall mortality rate was 3.6 %. (Abbreviations: DA;duodenal atersia, JA;jejunal atresia, JIA;jejunoileal atresia, IA;ileal atrsia).

• Journal of The Korean Association For Science Education
• /
• v.18 no.4
• /
• pp.601-615
• /
• 1998

Establishing and evaluating science education policies and revising and monitoring the effectiveness of science curriculum should be based upon the results of systematic and scientific research studies. Advanced nations have already been administering and developing national level science assessments for these purposes. The science assessments administered in Korea have been reported having many limitations and problems, and not succeeded in providing data for science education policy making and curriculum reform. The major purpose of the study is developing national level science knowledge assessment system in order to identify longitudinal trends of elementary and secondary school students science knowledge achievements. The research team consisted of science education experts and teachers from various school levels, decided the directions and major elements of national level science knowledge assessment with the consultation of educational evaluation experts. Item developing ability of the researchers was improved by seminars? and workshops on national assessment in advanced nations and developing skills of writing science items. Nearly 500 items were developed and revised. Pilot test was administered with 958 students at various school levels. 380 items were selected and tested with 8766 students, and the characteristics were analyzed in terms of item response theory. The target populations for national level science knowledge assessment are 5th-grade of elementary school, 2nd-grade of middle school, 1st and 2nd-grade of high school students. The proper period for the assessment is February every year. Multi-stage clustered sampling method is desirable and rotated forms are recommendable for the test format. Bridge items should be introduced to compare the results of multiple tests, and various grades. Anchor items should also be used for longitudinal interpretations of the results. The items for elementary school require low to medium abilities, for middle school and first grade of high school require medium to high abilities and for 2nd-grade of high school high abilities. The discrimination ability of the items developed is high.