• Proceedings of the KHEEA Conference
• /
• 2002.08a
• /
• pp.5-19
• /
• 2002

재한국, 1995년제일차출대국가제정적가정과교육과정. 지후, 한국적가정과교육과정경마료7차적수정여개혁과정. 재차과정중, 가정과정불단지추극출신, 기과목명칭재변화, 필수자선 등 선과성질야재변화, 과치함축, 여기술과정합. 이차, 가정과변위남녀생공수적과목, 저취순응료사회발전적수요. 종한국적교육과정래간, 1년급도10년급시국민공용기본교육계단, 11년급도12년급시자선교육계단. 거차, 가정과교육과정적접배위여하 : 소학(5~6학년)위실과, 중학화고중(7~10학년)위"기술.가정", 고중(11~12학년)위"가전과학". 장종2003년개시실시적가정과과시안배위여하 : 소학각2과시, 7~12학년시각2.3.3.3과시, 11~12학년위6개등차. 최근, 청소년문제, 교육환경, 상시인성, 가정파양, 소비과잉, 학대아동, 등사회문제도근가정생활유착밀절적연계, 인차, 재반지교육중, 가정교육응수중시. 단시, 실제상병불시여차. 작위교육주체적교사화부모도몰유인식도저개실정. 인차, 가정학자여교사유심요주근지거연구가정교육. 우기시, 유필요근중국, 일본, 등저사아주국가호상교류화합작적과정중거탐색가정교육적안정발전. 하면파미래가정학육발전적방향건의여하 : 1) "가정" 과시이가정과위연구대상적가정학적독립적연구요영역. 가정경적연구감상시 "가정", 타이가정생활질량적제고위기연구목적. 인차, 재가정교육중, 과목적명칭명명위 "기술. 가정", "가정일반". "가사" 시부합리적. 이응위 "가정" 2) 가정교육웅사중시성각색적변환, 직업적인직변고적각도출발, 사소학도고중분개위필수화선수과, 유남녀생공수. 3) 가정과과시재축점축단. 도시유우교육과정적축단이인기적피면불료적현상. 단시고 여가정과시실천, 실험성과목응보장기최저적과시, 최기마필수유지현재적과시. 4) 향래, 한국적가정교육과정기이가정과위기본철학배경화리념, 우급시파국가교육과정적배경화이념, 가정학적발전동태반영재교육과정중, 즉강조즘요교. 단시, 경력료반복적변혁지후, 최근, 각중시즘양거배양학생적십 요 양적능력여가치. 인차, 가정교육파교육목라방재즘루거제고가정생활적질량, 즘루거호조화가정생활화직업생활, 즘양거개발합리지해결화실천가정생활적가치관. 5) 최근, 가정교육파교육방향화목라방재거배양학생작위독립적개인, 작위가족적성원, 작위사회성원래주인생도로적능력. 인차, 가정교육이인적생활위중심. 우거섭급학생재성장과정중소우도적문제,재거포괄재가정화사회생활중소우도적문제. 즉거배양해결가정생활중소우도적소유적 문종적종합능력. 6) 가정과재교학방법화교학평개상, 응채용실험, 실습, 관찰 등방식, 응반체험성, 실천성경험. 위차, 응필편기험적실험, 실습설비. 7) 확정교육과정편제적치후, 응제고일반교육학자적참여율, 가정교육학자응적극참여 제정교청정책적유관교육적각종위원회. 재제정정책적과정중각진소능, 적극제출건고성적의황. 8) 한, 중, 일 삼국권원층립가정교육과정도작사, 위삼국교육과정적량호발전주공헌.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.1
• /
• pp.67-73
• /
• 2016

The application of titanium has been gradually rising because the utilizing ranges for low weight and high strength are rapidly increased by the need for improving the fuel economy in production industries such as the aviation and automotive in recent. The purpose in this study is to investigate the appropriate cutting conditions on the life of flat and round end mills by measuring the maximum cutting temperature relative to the machining time, and calculating the wear rates of cutting tool with the spindle speed and feed rate of vertical machining center as a parameter in the titanium roughing cut machining which is widely used in critical parts of aircraft, cars, etc. When the wetted roughing cut machining of titanium with a soluble cutting oil is conducted by the flat and round end mills, the maximum cutting temperatures for a variety of spindle speed and feed rate are measured at ten-minute intervals during 60 minutes by an infrared thermometer, and the wear rates of cutting tool are calculated by the weight ratios based on tool wear before and after the experiment. It is found that the maximum cutting temperature and the wear rates of cutting tool are raised as the cutting amount per tool edge is increased with the rise of feed rate, in this experimental range, and as the frictional area due to the rise of contacting friction numbers between tool and specimen is increased with the rises of cutting time and spindle speed. In addition, the increasing rate of maximum cutting temperature in the flat and round end mills are the highest for the cutting time from 50 to 60 minutes, and the wear rate of cutting tool in the flat end mill is 1.14 to 1.55 times higher than that in the round end mill for all experimental conditions.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.7 no.4
• /
• pp.257-266
• /
• 2002

To estimate the nitrogen budget and assess the purification function of a tidal flat ecosystem, a field survey was carried out at Hajeon tidal flat in Gomso Bay, the southern part of Byeonsan Peninsula, Chollabuk-do, Korea. A study area of 3.0$\times$4.5 ㎢ was established on the tidal flat and the concentrations of chlorophyll-a, DIN, DON, and TN were measured in the water column during the period of April 17-18, 1999: From the budget analysis, the loss rate of Chl-a was estimated to be -0.05 mg Chl/㎡/hr, which is approximately 7% of that at Issiki tidal flat in Aichi Prefecture, Japan. The lower loss rate of Chl-a in the study area was attributable to the lower standing crop of phytoplankton, the lower temperature that may reduce metabolic rates of biotic components and the lower biomass of macrobenthos in the study area. Over the 13.5 ㎢ of study area, Hajeon tidal flat removed 8.36$\times$10$\^$2/ kg N/day of TN, 5.36$\times$10$\^$3/ kg N/day of PON and 1.62$\times$10$\^$2/ kg N/day of phytoplankton-related PON, showing that the tidal flats may play an important role in removing nitrogen in coastal waters. The removal rate of PON, compared to the removal cost of the existing waste water treatment facilities, indicates that the economic value of the purification function of Hajeon tidal flat (13.5㎢) may be more than that of two large facilities.

• Korean Journal of Environmental Biology
• /
• v.35 no.4
• /
• pp.662-669
• /
• 2017

This study evaluated the ecotoxicological properties of livestock waste water treated by a LID (Low Impact Development) system, using a mixture of bio-reeds and bio-ceramics as suitable bed media for a subsequent treatment process of a livestock wastewater treatment plant. The relationship between the pollutant reduction rate and the ecotoxicity was analyzed with the effluents from the inlet pilot plant, with vegetated swale and wetlands and the batch type of an infiltration trench. Each pilot plant consisted of a bio process using bio-reeds and bio-ceramics as bed media, as well as a general process using general reeds and a bed as a control group. The results indicated that, after applying the HRT 24 hour LID method, the ecotoxicity was considerably lowered and the batch type pilot plant was shown to be effective for toxicity reduction. The LID method is expected to be effective for water quality management, considering ecotoxicity by not only as a nonpoint source pollution abatement facility but also, as a subsequent treatment process linked with a livestock manure purification facility. It is necessary to take the LID technic optimization study further to apply it as a subsequent process for livestock wastewater treatment.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.36 no.1
• /
• pp.71-77
• /
• 2010

The water fern Azolla belongs to the Azollaceae and forms a symbiotic association with a $N_2$-fixing cyanobacterium, referred to as Anabaena azollae, and this association has currently been demonstrated to have potential as a nitrogen source for rice production. Because of that, Azolla fern has been used not only as organic manure in southern China and northern Vietnam for a long time but also as food for animate creatures in the underwater and decontaminant in the water. However, the phenolic compounds and active materials of Azolla have not been examined in detail in the past studies. In the present study, anti-oxidant ability test and experiment to find a particular active material of Azolla imbricata and Azolla imbricata fraction (AIF) were performed. In anti-oxidant test such as DPPH test and lipoxygenase inhibition test, the value of test represented high activities compared with authentic sample - green tea and NDGA (nordihydroguaiaretic acid). In MMP-1 test, related to collagen protection and elasticity of skin, its inhibitory effect was measured over 75 %, and the phenolic compounds of AIF related with this activity were confirmed luteolin derivatives by using FT-IR spectroscopy, element analyzer (EA) and Liquid chromatography-MASS spectroscopy.

• Journal of Soil and Groundwater Environment
• /
• v.13 no.3
• /
• pp.8-14
• /
• 2008

The effects of surfactant types and the ratio of nonionic and anionic surfactants on the washing of diesel contaminated soil were investigated. In batch tests, the nonionic surfactant, which has HLB within 12-13, showed a high diesel removal efficiency and Tergitol 15-S-7 (T15S7) with 20 g/L concentration exhibited the highest removal efficiency of 79-88% among the tested nonionic surfactants. Anionic surfactants, in general, showed lower removal efficiency than nonionic surfactants. In case of mixed surfactant system, the removal efficiency increased with nonionic surfactant concentration. With mixed surfactants of T15S7 and SDS as 3 : 1 ratio, diesel removal was enhanced to 76% with 10 g/L of the mixed surfactants. These results could be used in the selection of proper surfactants for remediation of diesel contaminated soils.

• Journal of Wetlands Research
• /
• v.23 no.3
• /
• pp.242-251
• /
• 2021

Surface water pollution is a serious environmental problem in developing countries, like India, due to the unregulated discharge of untreated wastewater. To overcome this, the constructed wetlands (CWs) have been proven to be an efficient technology for wastewater treatment. In this study, different existing and experimental facilities were reviewed to be able to determine the current status of constructed wetlands in India. Based on the collected data from published literature, industrial wastewater contained the highest average chemical oxygen demand (COD), biochemical oxygen demand (BOD). In terms of total nitrogen (TN), Total phosphorous (TP), the lowest concentration was found on domestic wastewater. Vertical flow constructed wetlands (VFCW) and Horizontal flow constructed wetland (HFCW) were more effective in removing TSS, BOD, TP in domestic and industrial wastewater, whereas hybrid constructed wetlands (HCW) showed the highest removal for COD. The use of constructed wetlands as advanced wastewater treatment facilities in India yielded better water quality. The treatment of wastewater using constructed wetlands also enabled further reuse of wastewater for irrigation and other agricultural purposes. Overall, this study can be beneficial in evaluating and promoting the use of constructed wetlands in India.

• Analytical Science and Technology
• /
• v.21 no.1
• /
• pp.58-63
• /
• 2008

Nano-sized ZnO crystals were successfully incorporated using ion exchange method in TMA-A zeolite synthesized by the hydrothermal method. The optimal composition for the synthesis of TMA-A zeolite was resulted in a solution of $Al(i-pro)_3$ : 2.2 TEOS : 2.4 TMAOH : 0.3 NaOH : 200 $H_2O$. 0.3 g of TMA-A zeolite and 5 mol of $ZnCl_2$ solution were employed for the preparation of ZnO incorporated TMA-A zeolite. The crystallization process of ZnO incorporated TMA-A zeolite was analyzed by X-ray diffraction (XRD). The incorporated nano-sized ZnO crystals and the crystallinity of TMA-A zeolite were evaluated by transmission electron microscopy (TEM) and high resolution transmission electron microscopy (HRTEM). The size of the incorporated nano-sized ZnO crystals was 3~5 nm, while the TMA-A zeolite was 60~100 nm. The bonding structure and absorption of the ZnO incorporated TMA-A zeolite were compared with the ZnO and TMA-A zeolite by the FT-IR analysis. Subsequentlly, the ZnO incorporated TMA-A zeolite showed the photoluminescent characteristics on the wavelengths of 330~260 nm and 260~230 nm by measurement of UV spectrophotometer.

• Membrane Journal
• /
• v.33 no.6
• /
• pp.398-408
• /
• 2023

This work developed a hood and filter for antibacterial protective clothing for medical powered air purifying respirators (PAPR) that can be used in medical settings and quarantine against infectious diseases such as Zika virus, Middle East respiratory syndrome (MERS), and coronavirus disease-19 (COVID-19). The hood material of the protective clothing was made of polypropylene spunlace nonwoven fabric (SFS) was used for withstand wind pressure and external physcial pressure. Forthermore, in order to reduce the user's risk of infection, phytoncide-based materials were used on the outer-surface of the hood to achieve a 99.9% antibacterial effect, and the inner-surface were treated with hydro-philic materials to improve absorbency by 25%. In addition to evaluating the artificial blood penetration resistance, dry mi-croorganism penetration resistance, wet bacteria penetration resistance, and bacteriophage penetration resistance required for medical protective clothing hoods, it received a passing evaluation of levels 2-6. Meanwhile, as a result of evaluating the performance of the antibacterial treated spunlace high efficiency particulate air (HEPA) filter, excellent antibacterial properties, dust removal rate, and differential pressure effect were confirmed. All performance evaluations were conducted by an accredited certification body in accordance with the medical PAPR certification standards.

• Journal of Environmental Impact Assessment
• /
• v.32 no.5
• /
• pp.291-304
• /
• 2023

Harmful algal blooms (HABs) have become an increasing concern in terms of human health risks as well as aesthetic impairment due to their toxicity. The reduction of water pollutants, especially nutrients from non-point sources in a reservoir watershed, is fundamental for HABs prevention. We investigated the pollutant removal efficiencies of a constructed wetland to evaluate its feasibility as a method for controlling non-point sources located in the Annaecheon stream within the Daecheong Reservoir watershed. The overall removal efficiencies of pollutants were as follows: BOD 14.3%, COD 17.9%, SS 50.0%, T-N 19.0%, and T-P 35.4%. These results indicate that constructed wetlands are effective in controlling pollutants from non-point sources. The seasonal variation in removal efficiency depended on the specific pollutants. The removal efficiencies of BOD, COD, and T-N were stable throughout the year, except during winter, which might have been influenced by lower microorganism activity. In contrast, T-P showed a consistent removal efficiency even during the winter season, suggesting that the wetland can reduce external phosphorus loading to the reservoir. Regarding the effects of pollutant loadings on removal efficiency, the effluent concentrations of all pollutants were significantly decreased compared to those in the influent in case of middle and high loadings. This demonstrates that constructed wetlands can handle high pollutant loads, including the initial runoff during rainfall, to prevent reservoir eutrophication. Despite the various strengths of wetland water purification, there are limitations as passive treatment. Therefore, more case studies should be conducted to suggest optimum operational conditions for constructed wetlands, taking into consideration reservoir-specific characteristics.