• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.6
• /
• pp.42-47
• /
• 2012

Followed by a paper on the Pig and Bone orthopedic prosthetic, this experiment using Phantom and Bone MRI imaging I, II of orthopedic prosthetic metal effect combines magnetic resonance imaging on metal signal-to-noise ratio(Signal to noise : SNR) and CNR(Contrast to noise: CNR), fat signal suppression(Fat-suppression) images was compared. Specimen trees to measure the reliability of the experimental reproducibility tests and statistical analysis using the SPSS statistical package was applied program SPSS(IBM SPSS Statistice 19) by * P = 0.000 < significance level $({\alpha})$ = 0.01 as a significant there was a correlation(** P < 0.01). SNR and CNR results did not directly proportional to the Titanium, Stainless, Clip CNR and fat signal suppression of the order of images of blood specimens was found to be close to the image. The impact of orthopedic prosthetic metals on magnetic resonance imaging in the diagnostic value of Titanium is relatively high and are meant more.

• Korean Journal of Metals and Materials
• /
• v.50 no.3
• /
• pp.191-200
• /
• 2012

The purpose of this paper is to review the state of laser processing technology using metal powders. In recent years, a series of research and development efforts have been undertaken worldwide to develop laser processing technologies to fabricate metal-based parts. Layered manufacturing by the laser melting process is gaining ground for use in manufacturing rapid prototypes (RP), tools (RT) and functional end products. Selective laser sintering / melting (SLS/SLM) is one of the most rapidly growing rapid prototyping techniques. This is mainly due to the processes's suitability for almost any materials, including polymers, metals, ceramics and many types of composites. The interaction between the laser beam and the powder material used in the laser melting process is one of the dominant phenomena defining feasibility and quality. In the case of SLS, the powder is not fully melted during laser scanning, therefore the SLS-processed parts are not fully dense and have relatively low strength. To overcome this disadvantage, SLM and laser cladding (LC) processes have been used to enable full melting of the powder. Further studies on the laser processing technology will be continued due to the many potential applications that the technology offers.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.4
• /
• pp.5-18
• /
• 1995

공작기계는 금속가공 공업에 있어서 가장 중요한 생산수단의 요소이며, 공작기계의 발달없이 인류의 생활수준을 향상시킨다는 것은 생각도 할 수 없는 일이다. 선진국에서는 제조된 기계의 약 10%가 공작기계이며, 기계공업 노동력의 악 10%가 공작기계 산업에 종사하고 있다. 공작기계는 금속재료를 절삭(Cutting) 또는 연삭(Grinding)하여 원하는 모양, 치수 표면정도의 제품을 얻는 것이고 기계본체와 공구의 두부분으로 되어있어 동력에 의해 기계를 운전하고 절삭공구로써 가공을 한다. 국제 규격의 ISO에서는 '한 운동원에 의해서 작동하고 물리적, 화학적 또는 기타의 방법으로 성형해서 공작물을 생산하는, 수작업은 하지 않는 기계'라고 정의 하고 있으며 미국에서는 금속가공기계를 두가지로 나누어 정형형을 Forming machine이라 하고 절삭형을 Cutting machine 이라 분류하며 이 둘을 합하여 공작기계(Machine Tool)라고 부르고 있다.

• Transactions of Materials Processing
• /
• v.10 no.6
• /
• pp.500-508
• /
• 2001

The integration of Rapid prototyping (RP) and Rapid Tooling (RT) has the potential for rapid net shaping of thee-dimensional parts, which have a geometrical complexity. In this study, a new R)P process, (VLM-SP), was proposed to manufacture net shapes of three-dimensional prototypes and it was shown that VLM-SP is an effective and economic process through the comparison of building time, building cost and dimensional accuracy for the test parts with the commercial RP processes ; LOM and FDM. In addition, the metal parts, which are a spanner shape and a clover punch, were produced by the plaster casting as one of RT using the prototypes of VLM-SP.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.584-595
• /
• 1991

In the direct rolling processes for the mushy state alloy, a mushy state material which simultaneously contains liquid-solid phase is obtained from the exit port of stirring apparatus with a given solid fraction. This solid fraction is dependent on the temperature of within the solid-liquid range which shows to be controlled accurately by the experimental conditions for a given stirring apparatus. Rolling conditions for fabrication the fine surface strip were obtained from direct rolling experiment with mushy state alloys of Sn-75%Pb and aluminum alloy. Influence of solid fraction, rolling speed and initial roller gap on the state of strip surface and solidified structure was observed. We proposed theoretical model for prediction of rolling force, and we compared calculation result and experimental value measured with load cell.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.850-853
• /
• 2017

본 논문은, 크롤링을 통해 얻은 비정형 데이터를 'Python'의 'KoNLPy' 라이브러리를 사용해 형태소 분석한 후 텍스트 마이닝을 통한 감성사전 구축을 목표로 하고 있으며, 형태소들의 빈도수를 기반으로 가중치로 두어 선별된 단어들을 이용해 긍정과 부정으로 나누어 카테고리화 한다. 이후, 선별한 카테고리에 단어의 극성을 판단하여 감성사전을 모델링한다. 실험을 위하여, 온라인 쇼핑몰 리뷰를 크롤링하여 비정형 데이터를 수집하고, 수집한 데이터를 분석, 가공 과정을 거쳐 정형화된 단어를 추출한다. 그 후에, 리뷰에 자주 사용되는 단어를 바탕으로 카테고리를 구성하였다. 구성된 카테고리 별로 단어의 극성을 판단하여 소비자 성향을 분석한 결과, 단순히 긍정과 부정을 표현하는 범용 감성사전보다 더 세분화된 감성 사전을 구축 할 수 있었다.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.428-432
• /
• 2003

The technical combination of RP and RT has a potential for rapid manufacturing of three-dimensional parts. In the present work a new RP system, $VLM-_{ST}$, is proposed to manufacture net shapes of 3D prototypes. ㅁ human head shape and a kob shape are manufactured by the $VLM-_{ST}$ apparatus. In addition, a new RT technology, which utilizes a RTV molding technique and a triple reverse process technique, is proposed to manufacture net shapes of 3D plastic parts using prototypes of $VLM-_{ST}$. A plastic part of the knob shape os produced by the proposed RT technology. The combination of the proposed RP and RT enables the manufacturing of a plastic knob within two days.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.279-282
• /
• 2002

With the development of industrial society, the interest of new material is growing even in machining center. Composite materials in the new materials are superior to the metals In measure stability of strength, modulus and heat, moreover when mould is prepared, it can be done net shape manufacturing so it can be used widely in all sorts of machine parts, interior materials of car structural construct ions, the space aerial industry, ship materials, sports goods and so on. Therefore in this study, the property of processing drill on CFRP in composite materials by experimental study and some problems were examined.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.945-948
• /
• 2015

본 연구는 비 정형 농산물 중 6년근 수삼의 자동 등급 분류하기 위한 선행연구로, 이를 위해 4방향에서 측정 가능케 하는 수삼 측정기를 제작하였으며, 측정된 수삼영상에서 뼈대와 몸통부분을 인식하기 위한 알고리즘을 고안하여 적용하였다. 적용 결과 6년 근 수삼에서 홍삼으로 만들어 졌을 때 가공 후 영상을 추정가능하다는 것을 보였다.

• The Journal of Society for e-Business Studies
• /
• v.24 no.1
• /
• pp.121-137
• /
• 2019

De-identification is a method by which the remaining information can not be referred to a specific individual by removing the personal information from the data set. As a result, de-identification can lower the exposure risk of personal information that may occur in the process of collecting, processing, storing and distributing information. Although there have been many studies in de-identification algorithms, protection models, and etc., most of them are limited to structured data, and there are relatively few considerations on de-identification of unstructured data. Especially, in the medical field where the unstructured text is frequently used, many people simply remove all personally identifiable information in order to lower the exposure risk of personal information, while admitting the fact that the data utility is lowered accordingly. This study proposes a new method to perform de-identification by applying the k-anonymity protection model targeting unstructured text in the medical field in which de-identification is mandatory because privacy protection issues are more critical in comparison to other fields. Also, the goal of this study is to propose a new utility metric so that people can comprehend de-identified data set utility intuitively. Therefore, if the result of this research is applied to various industrial fields where unstructured text is used, we expect that we can increase the utility of the unstructured text which contains personal information.