• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.8
• /
• pp.764-768
• /
• 2002

In this paper, a double balanced gilbert cell MMIC mixer was realized in Tachyonics SiGe HBT technology. The fabricated mixer has 17 dB conversion gain, 9.8 dB noise figure, -4.2 dBm output 1 dB compression point, -27 dBc RF to IF isolation, and the good input, output matching characteristics. It draws 10 mA from a 3 V supply. The simulation and the measured results are closer to each other, which confirms accuracy of the model library and reliability of the process.

• The Journal of the Acoustical Society of Korea
• /
• v.33 no.6
• /
• pp.392-399
• /
• 2014

The underwater acoustic communication is characterized by doubly spread channels, which are the delay spread due to multiple paths and the doppler spread due to environmental fluctuations or a moving platform. An equalizer is used to remove the inter-symbol interferences that the delay spread causes, but an equalizer doesn't use an acoustic environment such as a multipath. However, a passive time-reversal mirror is simpler than an equalizer because a matched filter is implemented numerically at the receiver structure along with one-way propagation. In this paper, a passive time-reversal mirror is applied to remove interferences due to a multipath in sea-going experimental data in East Sea in Oct. 2010 and improved communication performance is confirmed. The performance is verified by comparing the signal-to-interference plus noise ratio before/after passive time-reversal mirror. It is also performed independently of the passive time-reversal mirror and adaptive equalizer and the bit error rate is compared to verify the performance of underwater acoustic communication.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.2
• /
• pp.123-131
• /
• 2021

The buffer is a key component of an engineered barrier system that safeguards the disposal of high-level radioactive waste. Buffers are located between disposal canisters and host rock, and they can restrain the release of radionuclides and protect canisters from the inflow of ground water. Since considerable heat is released from a disposal canister to the surrounding buffer, the thermal conductivity of the buffer is a very important parameter in the entire disposal safety. For this reason, a lot of research has been conducted on thermal conductivity prediction models that consider various factors. In this study, the thermal conductivity of a buffer is estimated using the machine learning methods of: linear regression, decision tree, support vector machine (SVM), ensemble, Gaussian process regression (GPR), neural network, deep belief network, and genetic programming. In the results, the machine learning methods such as ensemble, genetic programming, SVM with cubic parameter, and GPR showed better performance compared with the regression model, with the ensemble with XGBoost and Gaussian process regression models showing best performance.

• The Journal of the Korea Contents Association
• /
• v.21 no.10
• /
• pp.576-593
• /
• 2021

In this study, in order to investigate the factors that affect the percentage of correct answers and the degree of discrimination of the TOEIC test, a regression analysis was performed using corpus indicators that influence correct answer rate and the degree of discrimination for each part derived from the item analysis. The basic calculation word_length, consistency index LSA_overlap_adjacent_sentences, lexical diversity MTLD_VOCD, conjunction All_logical_causal_connectives_incidence, situational model casual_particles_causal_verbs_Ratio, syntactic complexity Left_embeddedness, and syntactic pattern density Infinitive_density were found to have negative effects. These factors that lower the correct answer rate can be utilized when setting learning goals. Vocabulary diversity index MTLD_VOCD, conjunction Additive_connectives_incidence, syntactic pattern density Infinitive_density, and lexical information person1_2_pronoun_incidence were found to have a positive effect. Factors influencing the increase in discrimination may provide important information for developing a learning program.

• Annual Conference on Human and Language Technology
• /
• 1999.10e
• /
• pp.257-264
• /
• 1999

자연언어 처리에 있어 문장의 성분 구조를 파악하는 통사적 해석에서는 애매성 있는 결과가 많이 생성된다. 한국어의 경우 어순 등의 통사적 특성뿐 아니라 상황과 의미, 문맥이 문장의 분석에 더 중요한 역할을 하기 때문에 문맥 자유 문법에 의한 접근 방법만으로는 중의적 구조의 해결이 어렵다. 이는 또한 의미 분석시 애매성을 증가시키는 원인이 된다. 이러한 통사적, 의미적 중의성 해결을 위해 용언 중심의 하위범주화 사전을 구축하였다. 본 논문에서는 용언에 따라 제한될 수 있는 하위범주 패턴을 정의하고 패턴에 따라 하위범주 사전을 구축하였다. 하위범주화 사전에는 명사의 시소러스와 정합하여 보어를 선택 제한(Selectional Restriction)할 수 있도록 용언과 명사와의 의미적 연어 관계에 따라 의미마커를 부여했다. 말뭉치를 통해 수집된 용언 12,000여개를 대상으로 25,000여개의 하위범주 패턴을 구축하였고 이렇게 구축한 하위범주화 사전이 120,000여 명사에 대한 의미를 갖고 있는 계층 시소러스 의미 사전과 연동하도록 하였다. 또한 논문에서 구현된 하위범주화 사전이 구문과 어휘의 중의성을 어느 정도 해소하는지 확인하기 위해 반자동적으로 의미 태깅(Sense Tagging)된 2만여 문장의 말뭉치를 통해 검증 작업을 수행하고, 의존관계와 어휘의 의미를 포함하고 있는 말뭉치에 하위범주 패턴이 어느정도 정합되는지를 분석하여, 하위범주 패턴과 말뭉치의 의존관계만 일치하는 경우와 어휘의 의미까지 일치하는 경우에 대해 평가한다. 이 과정에서 하위범주 패턴에 대한 빈도 정보나, 연어 정보를 수집하여 데이터베이스에 포함시키고, 각 의미역과 용언의 통계적 공기 정보 등을 추출하는 방법도 제시하고자 한다.을 입증하였다.적응에 문제점을 가지기도 하였다. 본 연구에서는 그 동안 계속되어 온 한글과 한잔의 사용에 관한 논쟁을 언어심리학적인 연구 방법을 통해 조사하였다. 즉, 글을 읽는 속도, 글의 의미를 얼마나 정확하게 이해했는지, 어느 것이 더 기억에 오래 남는지를 측정하여 어느 쪽의 입장이 옮은 지를 판단하는 것이다. 실험 결과는 문장을 읽는 시간에서는 한글 전용문인 경우에 월등히 빨랐다. 그러나. 내용에 대한 기억 검사에서는 국한 혼용 조건에서 더 우수하였다. 반면에, 이해력 검사에서는 천장 효과(Ceiling effect)로 두 조건간에 차이가 없었다. 따라서, 본 실험 결과에 따르면, 글의 읽기 속도가 중요한 문서에서는 한글 전용이 좋은 반면에 글의 내용 기억이 강조되는 경우에는 한자를 혼용하는 것이 더 효율적이다.이 높은 활성을 보였다. 7. 이상을 종합하여 볼 때 고구마 끝순에는 페놀화합물이 다량 함유되어 있어 높은 항산화 활성을 가지며, 아질산염소거능 및 ACE저해활성과 같은 생리적 효과도 높아 기능성 채소로 이용하기에 충분한 가치가 있다고 판단된다.등의 관련 질환의 예방, 치료용 의약품 개발과 기능성 식품에 효과적으로 이용될 수 있음을 시사한다.tall fescue 23%, Kentucky bluegrass 6%, perennial ryegrass 8%) 및 white clover 23%를 유지하였다. 이상의 결과를 종합할 때, 초종과 파종비율에 따른 혼파초지의 건물수량과 사료가치의 차이를 확인할 수 있었으며, 레드 클로버 + 혼파 초지가 건물수량과 사료가치를 높이는데 효과적이었다.\ell}$ 이었으며 , yeast extract 첨가(添加)하여 배양시(培養時)는 yeast extract

• The Journal of Korean Society for Radiation Therapy
• /
• v.26 no.1
• /
• pp.37-42
• /
• 2014

Purpose : At the time of the pelvis cancer radiation treatment using the belly board, set-up error is large because of a prone position. In order to improve the reproducibility, we made Vac-lock type belly board. In this study, we attempt to validate its utility. Materials and Methods : We compared belly board and Vac-lock type belly board through the OBI. OBI was performed three times with entire course of treatment and the setup errors in the direction of X axis, Y axis, Z axis were recorded and calculated the distance from the isocenter. Results : X axis, Y axis, Z axis setup errors with existing belly board were 0.32 cm, 0.41 cm, 0.29 cm. The setup errors with the vac-lock type belly board were 0.12 cm, 0.19 cm, 0.17 cm. Further, errors of 0~0.29 cm were increased from 48% to 83% when using VLT belly board. Error of 0.5 cm or more was reduced from 21% to 2%. Conclusion : Vac-lock type belly board is able to maintain the efficacy of existing and create to match the characteristics of the patient. Therefore We think that vac-lock type belly board is very useful in pelvic cancer patients.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.51 no.4
• /
• pp.16-30
• /
• 2023

As the concept of metaverse has received great attention, interest in metaverse related to landscape architecture is also increasing. The aim of this research is to understand the potential and tasks of applying metaverse in the field of landscape architecture by analyzing the user experience of a metaverse platform. The object of the research is Meta-Everland built in the Roblox platform, which has the most users among landscape architectural metaverses in Korea. NPS of 30 users who have been to Everalnd was investigated after using Meta-Everland with interviews. NPS before the metaverse experience was -16 and NPS after the experience was -24. This result means that the promotion level was lowered after the experience of the metaverse. There were three causes of lowered NPS: lack of users, low-quality graphics and interface, and lack of content. The factor of lack of users was the result of the other two problems. The factor of low technical quality is hard to be improved in a short period of time. Therefore, the main task to improve the metaverse is developing better metaverse content related to landscape architecture. It is more appropriate to develop metaverse-specific content rather than improve reality issues. Applying AR and VR devices, enhancing communication function, and developing potential as a simulation device are needed to be considered.

• Korean Journal of Remote Sensing
• /
• v.30 no.4
• /
• pp.431-444
• /
• 2014

As applications of spaceborne SAR imagery are extended, there are increased demands for accurate registrations for better understanding and fusion of radar images. It becomes common to adopt multi-resolution SAR images to apply for wide area reconnaissance. Geometric correction of the SAR images can be performed by using satellite orbit and attitude information. However, the inherent errors of the SAR sensor's attitude and ground geographical data tend to cause geometric errors in the produced SAR image. These errors should be corrected when the SAR images are applied for multi-temporal analysis, change detection applications and image fusion with other sensor images. The undesirable ground registration errors can be corrected with respect to the true ground control points in order to produce complete SAR products. Speeded Up Robust Feature (SURF) technique is an efficient algorithm to extract ground control points from images but is considered to be inappropriate to apply to SAR images due to high speckle noises. In this paper, an attempt is made to apply SURF algorithm to SAR images for image registration and fusion. Matched points are extracted with respect to the varying parameters of Hessian and SURF matching thresholds, and the performance is analyzed by measuring the imaging matching accuracies. A number of performance measures concerning image registration are suggested to validate the use of SURF for spaceborne SAR images. Various simulations methodologies are suggested the validate the use of SURF for the geometric correction and image registrations and it is shown that a good choice of input parameters to the SURF algorithm should be made to apply for the spaceborne SAR images of moderate resolutions.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.3
• /
• pp.233-238
• /
• 2005

3-D virtual city model is becoming increasingly important for a number of GIS applications. For reconstruction of 3D building in urban area aerial images, satellite images, LIDAR data have been used mainly and most of researches related to 3-D reconstruction focus on development of method for extraction of building height and reconstruction of building. In case of automatically extracting and reconstructing of building height using only aerial images or satellite images, there are a lot of problems, such as mismatching that result from a geometric distortion of optical images. Therefore, researches of integrating optical images and existing digital map (1/1,000) has been in progress. In this paper, we focused on extracting of building height by means of interest points and vertical line locus method for reducing matching points. Also we used digital plotter in order to validate for the results in this study using aerial images (1/5,000) and existing digital map (1/1,000).

• Conservation Science in Museum
• /
• v.22
• /
• pp.15-26
• /
• 2019

This study was focused on the three-dimensional convergence modeling that can multilaterally analyze internal and external shapes of the Sam-Chongtong Hand Canon by optical precision scanning optimized for acquiring the surface shape and X-ray CT scanning used for obtaining the internal shape. First, the scanning results were converted by compatible extension, after which three-dimensional deviation analysis was conducted to verify mutual conformities. Accordingly, most (56.98%) deviations between the two scanning models was found be ±0.1mm. This result did not influence registration and merging based on the ICP algorithm. The merged data exhibited the external surface color, detailed shapes, internal width, and structure of the hand canon. The three-dimensional model based on optical surface scanning and X-ray CT scanning can be used for traditional technique interpretation as well as digital documentation of cultural heritage. In the future, it will contribute to deliver accessible scientific information of exhibits for visitors.