• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.899-904
• /
• 2014

Thickness profiled blank is designed using optimization techniques for maximizing the bulged heights during the free bulging of Inconel 718. The thickness of the blank was described by the Bezier curve and the locations of the control points were used as the design variables for optimization. The maximization of the bulged heights within the limited strain range served as the objective function and constraints for optimization. The equivalent static loads method for non-linear static response structural optimization (ESLSO) was used and the result of the optimization revealed 22 increased bulged heights. A free bulging test using a blank with an optimized profile was conducted to verify the optimization process. The results were compared with those of numerical analysis in terms of bulged height and deformed shape.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.11a
• /
• pp.155-159
• /
• 1997

ATM(Asynchronous Transfer Mode)은 광대역망에서 여러 형태의 멀티미디어 서비스를 지원하는 수단을 제공한다. 요즘 통신망으로 ATM의 채택이 증가하고, 이 망들이 멀티미디어 통신을 하기 위해 많은 데이터들이 오고 갈 때, 영상을 효율적으로 트래픽 제어함으로써 통신망에 끼치는 영향을 최소화 할 수 있다. 본 연구에서는 장면 전환 검출에 관해 State(상태) 알고리즘, Standard deviation(표준편차) 알고리즘, Percentage(가중치) 알고리즘 등을 이용한 장면 전환 검출의 성능 시험을 했다. Stage 알고리즘은 n상태로 나누어서 이루어지고, Standard deviation 알고리즘은 통계적 측면을 다룬 것이고, Percentage 알고리즘은 비례에 의해 이루어진다. 그 중에 Percentage를 이용한 장면 전환 검출 알고리즘은 다른 알고리즘에 비해 능동적이고 효율적임을 보여 이를 제안한다. GCRA(Generic Cell Rate Algorithm)를 통해 트래픽 관련 파라미터의 지정에 관련한 Nonconforming 셀률에 의한 CDVT와 PCR의 분석을 시도한다. 이 때에도 마찬가지로 Percentage 알고리즘과 GCRA를 장면 전환 검출 데이터와의 상관관계를 통해 파라미터를 정하여 트래픽 관련 GCRA 알고리즘에 적용할 수 있다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.4
• /
• pp.111-116
• /
• 2009

In order to verify relevance propriety as material for improving and replacing agricultural land of soil(the rest is sorting soil) produced in treatment process of construction waste, this study executed physical, mechanics and soil analysis test with mixing sorting soil and farm land, crops rearing comparison test with replacing lower layer soil.

• Journal of Digital Convergence
• /
• v.15 no.7
• /
• pp.223-229
• /
• 2017

Europe, the US and Japan have acquired test results on impact coefficient for a long time and applied it to equipment design to secure safety of structures. However, Korean enterprises use the impact factor held by advanced business to design equipment as it is difficult for them to obtain it through tests. In this paper, NX/NASTRAN, was used to perform static load analysis and impact load analysis of a PCB Handler, semiconductor test equipment, and the result was employed to study how to calculate the impact coefficient with the finite element analysis. The calculation method was applied to the JIS(Japanese Industrial Standard), and the impact coefficient of the PCB handler was calculated as 1.27 for the sudden start or stop. The impact coefficient generated by the analysis is expected to make a great contribution to the industry as it can be used to improve the equipment structure and develop on existing equipment in the future.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.106.2-106.2
• /
• 2012

Ti-Ni합금은 CsCl구조의 B2상, monoclinic 구조의 B19'(M)상과 rhombohedral 구조의 R상(R)이 나타난다고 알려져 있고, 이들 상의 변태에 의해 열탄성 마르텐사이트와 응력유기 마르텐사이트에 의한 형상기억효과와 초탄성 효과를 가지고 있다. 또한 Ti-Ni 합금은 우수한 형상기억특성을 가질 뿐만 아니라 생체적합성, 가공성 및 내식성 등이 뛰어나 공업분야 및 생체분야에서 폭 넓게 활용되고 있다. Ti-Ni합금의 형상기억특성은 냉간가공 후 어닐링 처리의 온도와 시간에 따른 matrix 내 Ni의 농도, 석출물의 밀도와 크기, 전위밀도와 전위주위의 응력장에 의해 영향을 받는다고 알려져 있다. 본 연구에서는 Ti-Ni합금의 형상기억 특성 및 변태온도에 미치는 영향을 조사하기 위해 다양한 냉간가공률의 시료를 제작하여 다양한 온도에서 Annealing 처리를 하여 냉간가공률 및 Annealing 온도가 형상기억특성에 미치는 영향을 조사하였다. Ti-50.4 at.% Ni 합금은 진공 아크 용해로에서 용해 하였으며, 용해된 Ingot는 열간단조 및 열간 압출한 후 냉간 인발과 중간온도에서 어닐링을 반복하면서 직경 0.5mm의 선재로 만들었다. 최종적으로 제작한 선재의 냉간가공률은 9.5%, 18.2%, 34.5%, 45% 이었다. 각 시편은 5X10-5torr의 진공으로 석영관에 진공 봉입하여 각각 673K, 723K, 783K에서 1hr 열처리 하였다. 합금의 형상기억특성과 변태온도는 DSC에 의해 조사되었다. DSC 측정 결과, 냉간가공률이 증가함에 따라 마르텐사이트 변태 온도는 감소하였고, 어닐링 온도가 증가함에 따라 마르텐사이트 변태 온도는 증가하였다. 또한 가공률이 증가하여도 R상 변태온도는 큰 변화가 없었고, Annealing온도가 증가함에 따라 R상 변태온도는 감소하였다. 또한, 형상기억특성은 인장시험기를 이용한 정하중 열싸이클 테스트를 이용하여 평가 하였다. 냉간 가공률이 증가함에 따라 안정한 형상기억특성을 나타내었다.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.57-63
• /
• 2017

In this study, we identified how the water content change in various NCO index affects the static comfort of polyurethane seat foam pad for automobiles. In order to identify factors that affect the static comfort, a static load test was performed using UTM to plot a hysteresis curve. The hardness of the foam when it was modified by 25, 65%, hysteresis loop area, hysteresis loss (%), and Sag factor were also obtained. By measuring the swelling ratio, it was confirmed that, as the water content increased in a fixed NCO index, the hardness and crosslinking density increased while the restoring force decreased due to the increase of urea bond. Also the Sag factor decreased due to the increase of surface hardness. As the NCO index increased in a fixed water content, the urethane and urea bond reacted more with isocyanate, leading to an increase in hardness and decrease in restoring force.

• Journal of Food Hygiene and Safety
• /
• v.34 no.1
• /
• pp.13-21
• /
• 2019

A method was developed for the simultaneous detection of an antibiotic fungicide, streptomycin, and its metabolite (dihydrostreptomycin) in agricultural products using liquid chromatography-tandem mass spectrometry (LC-MS/MS). The samples were extracted using methanol adjusted to pH 3 using formic acid, and purified with a HLB (Hydrophilic lipophilic balance) cartridge. The matrix-matched calibration curves were constructed using seven concentration levels, from 0.001 to 0.1 mg/kg, and linearity of five agricultural products (hulled rice, potato, soybean, mandarin, green pepper), with coefficients of determination $(R^2){\geq}0.9906$, for streptomycin and dihydrostreptomycin. The mean recoveries at three fortification levels (LOQ, $LOQ{\times}10$, $LOQ{\times}50$, n = 5) were from 72.0~116.5% and from 72.1~116.0%, and relative standard deviations were less than 12.3% and 12.5%, respectively. The limits of quantification (LOQ) were 0.01 mg/kg, which are satisfactory for quantification levels corresponding with the Positive List System. All optimized results satisfied the criteria ranges requested in the Codex guidelines and the Food Safety Evaluation Department guidelines. The present study could serve as a reference for the establishment of maximum residue limits and be used as basic data for detection of streptomycin and dihydrostreptomycin in food.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.10
• /
• pp.827-832
• /
• 2013

Heating wire cutting type separation mechanism has been widely used for cube satellite applications due to its design constraints such as small size of $10cm{\times}10cm{\times}10cm$ and light weight of less than 1kg. In addition, usage of pyro technic device is not allowed for cube satellite application. The conventional methods have some disadvantages of relatively small mechanical constraint force and the system complexity for the multi-deployable systems. In this paper, a separation nut type non-explosive separation mechanism has been proposed and investigated. The effectiveness of the design has been verified through the qualification tests of the mechanism.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.661-669
• /
• 2021

A mechanical stiffener has been mainly applied on a PCB to secure fatigue life of a solder joint of an electronic components in spaceborne electronics by minimizing bending displacement of the PCB. However, it causes an increase of mass and volume of the electronics. The high damping PCB implemented by multi-layered viscoelastic tapes of a previous research was effective for assuring the fatigue life of the solder joint, but it also has a limitation to decrease accommodation efficiency for the components on the PCB. In this study, we proposed high damping PCB with a multi-layered superelastic shape memory alloy stiffener for spatialminimized, light-weighted, high-integrated structure design of the electronics. To investigate the basic characteristics of the proposed PCB, a static load test, a free vibration test were performed. Then, the high damping characteristic and the design effectiveness of the PCB were validated through a random vibration test.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.2
• /
• pp.65-69
• /
• 2009

We studied to compare the fractionation patterns of Ni, Cu, Zn in Jeju volcanic ash soils and to elucidate the uptakes of them by Pakchoi(Brassica campestris var. chinensis). Fractionation patterns of soils by sequential extraction method were different and make to distinguish from various soil types. In Pakchoi, the transfer rates of Ni, Cu, Zn from root to shoot were also different by metal types. There are low corelation between fractional contents in soil and contents in plants of trace elements except for exchangeable Zn. It is needed to develop novel methods for the assessment soil Ni in relation to plant uptake because of poor corelation.