• Proceedings of the KSME Conference
• /
• 2005.11a
• /
• pp.216.2-216.2
• /
• 2005

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.296-301
• /
• 1996

이 연구의 목적은 원주방향 균열을 가진 페라이틱 배관의 파괴거동을 실험적으로 평가하는데 있다. 한계하중방법, SC.TNP 방법, R6방법, 그리고 ASME Code방법과 같은 여러 파괴거동 평가 방법의 타당성이 PWR 운전조건(압력:15.5MPa, 온도:228$^{\circ}C$)하에서의 직경 16인치의 대규모 배관파괴실험을 통해 조사된다. 모사지진하중, 단일주파수 사인함수하중, 정하중과 같은 여러 가지 형태의 하중이 배관의 하중지지능력에 미치는 영향이 조사된다. 또한 엘보우부위와 직관부의 영향과 표면균열 및 관통균일의 영향 등도 함께 조사된다. 결과는 다음과 같다. (1) 표면균열을 가진 배관의 파괴거동은 한계하중방법과 SC.TNP 방법에 의해 잘 예측할 수 있다. 반면 관통균열의 경우는 한계하중방법에 의해 잘 예측된다. (2) 모사지진하중하에서는 단일주파수 사인함수하중이나 정하중 하에서 보다 하중지지능력이 크게 예측된다. (3) 엘보우부위와 직관부, 관통균열과 표면균열 사이에 파괴거동에 대한 큰 차이는 없다.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.13-14
• /
• 2009

Segmented composite is known that resists at static and impact load well. In this study, segmented composite was evaluated by static and impact load test. Additionally, finite element analysis method was employed and optimal mix of mortar was developed. Therefore, impact resistance shows aspect that is influenced by interaction of interface and layout of segmented blocks.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1316-1321
• /
• 2003

The systematic method to construct equivalent static load from the given dynamic load is proposed in the present study. Previously reported works to construct equivalent static load were based on ad hoc methods. They may results in unreliable structural design. The present study proposes a selection scheme of degrees of freedom(d.o.f) for imposing the equivalent static loads. The d.o.fs are selected by Two-level condensation scheme(TLCS). TLCS consists of two two-steps. The first step is the energy estimation in element-level and the second step consists of the traditional sequential elimination precudure. Through several numerical examples, the efficiency and reliability of proposed scheme is verified.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.3
• /
• pp.259-268
• /
• 2015

An optimization method for the tube hydroforming process is developed using the equivalent static loads method for non linear static response structural optimization (ESLSO). The aims of the tube hydroforming optimization are to determine the axial forces (axial feedings) and the internal pressures, and to obtain the desired shape without failures after hydroforming analysis. Therefore, the magnitude of the forces should be design variables in the optimization process. Also, some tube hydroforming optimization needs to consider the result of the thickness in nonlinear dynamic analysis as responses. However, the external forces are considered as constants and the thickness is not a response in the linear response optimization process of the original ESLSO. Thus, a new ESLSO process is proposed to overcome the difficulties and some examples are solved to validate the proposed method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.1
• /
• pp.1-10
• /
• 2011

An optimization method is proposed for preform and billet shape designs in the forging process by using the Equivalent Static Loads (ESLs). The preform shape is an important factor in the forging process because the quality of the final forging is significantly influenced by it. The ESLSO is used to determine the shape of the preform. In the ESLSO, nonlinear dynamic loads are transformed to the ESLs and linear response optimization is performed using the ESLs. The design is updated in linear response optimization and nonlinear analysis is performed with the updated design. The examples in this paper show that optimization using the ESLs is useful and the design results are satisfactory. Consequently, the optimal preform and billet shapes which produce the desired final shape have been obtained. Nonlinear analysis and linear response optimization of the forging process are performed using the commercial software LS-DYNA and NASTRAN, respectively.

• Journal for History of Mathematics
• /
• v.23 no.3
• /
• pp.1-20
• /
• 2010

Hong Jung Ha(洪正夏, 1684~?) is the greatest mathematician in Chosun dynasty and wrote a mathematics book Gu Il Jib(九一集) which excels in the area of theory of equations including Gou Gu Shu. The purpose of this paper is to find his influence on the history of Chosun mathematics. He belongs to ChungIn(中人) class and works only in HoJo(戶曹) and hence his contact to other mathematicians is limited. Investigating his colleagues and kinship relations including the affinity and consanguinity, we conclude that he gave a great influence to those people and find that three great ChungIn mathematicans Gyung Sun Jing(慶善徵, 1684~?), Hong Jung Ha and Lee Sang Hyuk(李尙爀, 1810~?) are all related through marriage.

• Journal of the KSME
• /
• v.32 no.4
• /
• pp.358-370
• /
• 1992

균열이 형성되어 있는 설비가 고온에서 정하중을 받으면, 크립 조건에서 균열이 성장하여 파손이 발생한다. 이 때 잔여수명 평가법을 설명하기 위해 발전소 헤더의 경우를 예로하여 잔여수명 평가절차, 이에 필요한 기초이론 및 Cr-Mo강의 관련 재료 물성 데이터 등을 설명하였다. 현재 국내발전소들이 노후화되어 잔여수명평가의 필요성이 증대되고 있으므로, 이 분야의 연구 및 기 술개발은 시급하고 중요한 과제라고 생각된다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.04a
• /
• pp.41-42
• /
• 2012

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.523-524
• /
• 2011