• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.242-242
• /
• 2020

도시화와 산업화에 따른 유출환경의 변화로 인해 도심지에서 발생하는 대부분의 유출은 도로표면을 따라 이동하고 도로변에 설치된 빗물받이에 의해 배수된다. 이 때 빗물이 원활하게 배수되지 않아 노면수가 정체되고, 이 노면수가 인근 주택지로 유입되어 침수 피해가 발생한다. 이러한 현상은 유출량이 집중되는 도심지 저지대에서 주로 발생하며 설계 한도를 초과하지 않는 정상적인 강우 조건에서도 빈번히 나타나고 있다. 이는 최근의 기후 변화로 인한 집중 호우 등을 고려하여 설계 기준이 지속적으로 조정되어야 함과 동시에 도로 노면수의 배수 능력 평가를 위한 실제적인 연구가 이루어져야 한다는 필요성을 나타내고 있다. 특히 도로 빗물받이의 효율은 주로 종경사 및 횡경사 등의 도로 조건, 표면 유출 우수량, 빗물받이의 형상 등에 의존한다. 그러므로 상향된 설계빈도 및 도로 조건을 고려한 도로 표면 유출에 대한 흐름 분석과 빗물받이 특성을 고려한 실증연구의 분석 및 설계 해석 알고리즘의 개발이 시급한 실정이다. 본 연구에서는 도로 노면수의 배수 능력 증대를 위해 연속 설치된 빗물받이 조건 및 도로 경사조건을 고려하여 도로 배수시설의 표면 유출 모델 설계 알고리즘을 개발하였다. 표면 유출 유량은 도로의 차선(2~4차선), 경사(종경사 2~10% 및 횡경사 2~10%) 및 설계빈도(최대 30년)를 고려하였으며 유량이 노면 진행방향을 따라 연속적으로 증가하는 부등류 흐름 해석 방법을 채택하였다. 또한, 빗물받이 설치간격(L)과 도로의 폭(W)의 곱으로 계산되는 단순 직사각형 형태의 노면 형상이 아닌 도로 종경사 및 횡경사에 따른 유달거리를 산정하여 평행사변형 형태의 노면 형상을 계산하고 이에 따른 면적(A), 도달시간(tc) 및 강우강도(I)를 산정하였다. 이와 같은 1차원 흐름분석을 통해 도로 표면흐름 및 빗물받이 설치 간격을 제시하고 기존의 제시된 빗물받이 설치 간격과 비교하여 본 연구에서 제시한 설계 알고리즘을 검증하였다. 또한, 수리 실험을 통해 측정된 빗물받이 차집효율을 이용하여 연속 구간에서의 도로 표면 유출 모델의 적용성을 제시하였다. 이는 빗물받이 유입구를 통해 모든 유량이 유출된다고 가정하고 단독 구간에서의 수리분석 결과만을 고려하여 이를 확장시켜 개발된 기존의 도로 표면 유출 모델을 보완할 수 있을 것으로 기대된다. 본 연구에서 제시하고 있는 설계 알고리즘을 적용한다면 도로 전체 구간에서의 흐름 변화 분석과 배수효율의 정량적인 분석이 가능하므로 향후 도로 표면 침수 피해 저감 및 배수능력 증대를 위한 실증적이고 정량적인 분석 방법이 될 것으로 판단된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5D
• /
• pp.443-451
• /
• 2010

This paper proposes the methodology about advisory safety speed based on real-time vehicular data collected from highway. The proposed model is useful information to drivers by appling seamless wireless communication and being collected from ECU(Engine Control Unit) equipment in every vehicle. Furthermore, this model also permits the use of realtime sensing data like as adverse weather and road-surface data. Here, the advisory safety speed is defined "the safety speed for drivers considering the time-dependent traffic condition and road-surface state parameter at uniform section", and the advisory safety speed model is developed by considering the parameters: inter-vehicles safe stopping distance, statistical vehicle speed, and real-time road-surface data. This model is evaluated by using the simulation technique for exploring the relationships between advisory safety speed and the dependent parameters like as traffic parameters(smooth condition and traffic jam), incident parameters(no-accident and accident) and road-surface parameters(dry, wet, snow). A simulation's results based on 12 scenarios show significant relationships and trends between 3 parameters and advisory safety speed. This model suggests that the advisory safety speed has more higher than average travel speed and is changeable by changing real-time incident states and road-surface states. The purpose of the research is to prove the new safety related services which are applicable in SMART Highway as traffic and IT convergence technology.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4D
• /
• pp.361-368
• /
• 2010

It is general that mostly congested sections of national backbone networks have been improved based on the national network expansion plan. However, in case of intermodal terminals which are origins of logistics, it is still so congested that travel time between origin and destination is long. Therefore, intermodal transportation systems plan of major intermodal terminals for the intermodal connector networks between intermodal terminal and national backbone network or intermodal terminal was established. With the limitation of priority methodology applying to intermodal connector facility under existing methodology, this study suggests an improved priority methodology. This study includes characteristics of terminal on the hierarchical structure and assessment list, but it does not concentrate on the specific terminal type through survey. To avoid a certain concentration, budget constraint for each terminal type was considered ahead of priority. Finally priority methodology was developed with two-step assessment under consideration that specific terminal is not involved in intermodal connector facility project. As a result of calculating weights by survey, effects such as d/c and accessibility fluctuations index through project implementation gain high weight, and degree of region underdevelopment gets next. Although the methodology in this study could not yields the priority by assessment list, it will be useful for setting the direction on policy related to intermodal connector facility projects.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.5
• /
• pp.108-126
• /
• 2023

In this paper, the dynamic hard shoulder running for bus only (HSRFBO) was presented to solve the traffic congestion by increase the capacity in chronic congested sections of highways, and a simulation was performed to evaluate the comparison with the current hard shoulder running for all vehicles(HSRFAV) and median bus only lane and HSR(MBOLHSR). According to the evaluation results, it was evaluated to be more advantageous in terms of traffic flow and safety than the current HSRFAV. In addition, the speed of passing buses is slightly reduced compared to the MBOHSR, but the speed of entering and exiting buses is increased and the speed of buses and cars is greatly improved. Therefore It was analyzed that the efficiency of transport personnel was also improved. In particular, it is expected that traffic flow will be stabilized as the difference in speed between passenger cars and buses will be greatly reduced, and violations of exclusive bus lanes by passenger cars will be greatly reduced. In addition, the operation time of HSR is greatly reduced, so that the original function of the shoulder lane can be maintained as much as possible. As a result, it was analyzed that the risk of accidents was significantly reduced when operating HSRFBO compared to when operating MBOHSR, and cross-conflicts with high accident severity did not occur.

• Journal of the Korean Institute of Gas
• /
• v.27 no.4
• /
• pp.12-18
• /
• 2023

The effective evacuation strategy according to the accident scenario is crucial to minimize human casualties in the event of toxic gas leak accidents. In this study, the effect of the direction of a building and the location of an industrial complex on the increase in indoor concentration and outdoor diffusion was examined under the same leakage conditions, and effective evacuation criteria were established. In addition, the guidelines for building directions were suggested when constructing buildings that would mitigate human damage caused by chemical accidents. Three scenarios where buildings faced the front, side, and rear of the leakage direction were investigated through CFD simulations. The results revealed that when the building faced the industrial complex, both indoor and outdoor average gas concentrations increased significantly, reaching up to 120 times higher than the other two orientations. Moreover, the indoor space was filled with toxic gas substances more than twice in the same time due to the rapid increase of indoor concentration rate. In cases where the building's windows were positioned at the front, toxic gas stagnation occurred around the building due to pressure differences and reduced flow velocities. Based on our findings, the implementation of these guidelines will contribute to safeguarding residents by minimizing exposure to toxic gas during chemical accidents.

• Cartoon and Animation Studies
• /
• s.33
• /
• pp.223-246
• /
• 2013

Even though cartoons and narration comics were born from different origin, they have been called by names such as 'cartoons' or 'comics'. The reason can be found in the similarity of cartoons and narration comics. The similarity of cartoons and narration comics is the genre consisting of writing and drawing. Writing can be the format of expression and it can represent the story. Such story is present as a component of 'narration'. Sub genre of comics includes cartoons and narration comics. It includes animation in a broad range. In cases of narration comics and animation, it is thought that narration is present with continuity of time. However, in case of cartoon, because one or two cuts without continuity of writing are frequently expressed, it is being asked whether narration is present. It is easy to be reminded of epic or chanson de geste whenever you hear 'narration'. Since it deals with a biography of the character, we think the concept of 'narration' with temporality. However, narration provides a certain event in a broad range. Thus, cartoons presenting one event with the image may have the existence of narration, because description of multiple scenes of narrative comics can be implicitly represented in cartoons. As such implications leave a space, the empty space can be filled by active reasoning of recipients. However, nevertheless, it is very difficult to find studies as well as mentions of narration in cartoons. Thus, in this paper, we investigate the concept and structure of narration and demonstrate the presence of narration in cartoons. First of all, we looked at the narration theory in literature before studying narration in cartoons. The reason is that we thought the approach to the literary theory was required in order to investigate the basic elements, since cartoons are a collection of writing and drawing. We were focused on the prerequisites of narration presented in "story and discourse" of s. Chatman. If the prerequisites of narration are present, we can assume that the narration is present. The prerequisites are 'narration reasoning', 'screening', 'consistency', 'process statements' and 'stasis statement'. As s. Chatman described them as prerequisites of narration, he analyzed the narration structures of films and novels. In addition, we revealed that the narrations were present in cartoons as we identified how prerequisites of narration presented by Chatman were presented and expressed through "vocabulary of comics", "Timeframe" and "life in the line" described in "understanding comics" by Scott McCloud.

• KSBB Journal
• /
• v.13 no.2
• /
• pp.181-186
• /
• 1998

In order to obtain high-level production of recombinant human thrombopoietin (rhTPO) in insect cell line, HTI-TN-5B1-4 (TN5), conditions for optimal rhTPO expression such as multiplicity of infection (MOI), the cell density at infection, harvesting time and type of culture method as well as growth media were determined. When TN5 cells were cultured as anchorage-dependent state in 60-mm dish, cell density $2\times^6$ cells,MOI of 10 and Garvesting the culture media at 72 hr post-infection wrere the cinditions for highest rh TPO production. High production of rhTPO was also achieved by using EXPRESS FIVE serum free media rather than SF900II serum free media-1. Anchorage-dependent TN5 cells were adapted as a suspension culture when they were grown in the presence of heparin. TN5 cells were successfully cultured at 0.2 L scale in suspension culture without having aggregation. When TN5 cells were cultured as suspension state, cell density of $0.6\times10^6$ cells/mL, MOI of 1 and harvesting the culture media at 72 hr post-infection, gave the highest yield of rhTPO.

• Journal of Bio-Environment Control
• /
• v.11 no.1
• /
• pp.5-11
• /
• 2002

In this study, new development of natural ventilation window was accomplished to control environment of greenhouse with no use of farced ventilation during hot season. The ventilation effect of developed ventilation window was investigated in experimental greenhouse which was designed using side wall panel and folding type panel fur natural ventilation. Folding panel type ventilation window was designed to open upper part of the side wall and top of the roof using two hinges which are located bottom of the side wall and the roof panel to grab one side of each panels and guide the other side along with the guidance rail. Developed ventilation window has top ventilation part with maximum moving distance X=ι (1-cos$\theta$)=848.5 mm and side ventilation part with maximum moving distance Y=ι/2 $\times$sin$\theta$=1,184.4 mm at 45$^{\circ}$ of theoretical opening angle. It took 4.5 minutes to open roof vent fully and temperature at 1.2 and 0.8 m height decreased after 1 minute from starting opening and became equilibrium state maintaining 3-4$^{\circ}C$ difference after 2 minutes from complete opening. Air exchange rate was 15.2~39.3 h$^{-1}$ which was more than 10~15 h$^{-1}$ of continuous type and Venlo type greenhouse. The descent effect of temperature by ventilation windows was two times higher than Venlo type greenhouse.

• Journal of dental hygiene science
• /
• v.16 no.4
• /
• pp.284-292
• /
• 2016

Water supplied through dental unit waterlines (DUWLs) has been shown to contain high number of bacteria. To reduce the contamination of DUWLs, it is essential to develop effective disinfectants. It is, however, difficulty to obtain proper DUWL samples for studies. The purpose of this study was to establish a simple laboratory model for reproducing DUWL biofilms. The bacteria obtained from DUWLs were cultured in R2A liquid medium for 10 days, and then stored at $-70^{\circ}C$. This stock was inoculated into R2A liquid medium and incubated in batch mode. After 5 days of culturing, it was inoculated into the biofilm formation model developed in this study. Our biofilm formation model comprised of a beaker containing R2A liquid medium and five glass rods attached to DUWL polyurethane tubing. Biofilm was allowed to form on the stir plate and the medium was replaced every 2 days. After 4 days of biofilm formation in the laboratory model, biofilm thickness, morphological characteristics and distribution of the composing bacteria were examined by confocal laser microscopy and scanning electron microscopy. The mean of biofilm accumulation was $4.68{\times}10^4$ colony forming unit/$cm^2$ and its thickness was $10{\sim}14{\mu}m$. In our laboratory model, thick bacterial lumps were observed in some parts of the tubing. To test the suitability of this biofilm model system, the effectiveness of disinfectants such as sodium hypochlorite, hydrogen peroxide, and chlorhexidine, was examined by their application to the biofilm formed in our model. Lower concentrations of disinfectants were less effective in reducing the count of bacteria constituting the biofilm. These results showed that our DUWL biofilm laboratory model was appropriate for comparison of disinfectant effects. Our laboratory model is expected to be useful for various other purposes in further studies.

• Microbiology and Biotechnology Letters
• /
• v.33 no.2
• /
• pp.117-122
• /
• 2005

Beijerinckia indica was cultured in mineral salts medium (MSM) medium with various carbon and nitrogen sources to improve the production yield of heteropolysaccharide-7 (PS-7). At high C/N ratio, the high concentration of PS-7 was produced until 40 h of the culture, whereas most of the glucose as a carbon source was used for the cell growth at low C/N ratio. However, at the high C/N ratio, PS-7 accumulation stopped at 48 h of the culture due to the increasing viscosity of the culture broth would inhibit the cell growth. Therefore, the optimized value of C/N ratio was 33.3 (20 g/L glucose, 7.5 mM $NH_{4}NO_3$) for the high production of PS-7. In the culture with various carbon sources, B. indica effectively used the hexoses or glucose-generating sugars for PS-7 formation. Especially, sucrose was the best carbon source for the high production of PS-7 (6.96 g/L) with a high viscosity (40772 cp). In the culture of B. indica with MSM medium containing 20 g/L glucose and 7.5 mM $NH_{4}NO_3$ in a 51 fermentor, the highest cell concentration was 2.5 g/L and the highest concentration of PS-7 was 7.5 g/L (35174 cp). The additional nitrogen sources of 7.5 mM $NH_{4}NO_3$, glutamine and glutamate at 12 h of the culture after exhaustion of a nitrogen source regulated the metabolism of carbon sources, therefore the nitrogen sources could control PS-7 synthesis.