• 한국해양학회지
• /
• v.23 no.3
• /
• pp.130-145
• /
• 1988

Spatial distribution and temporal variations of phytoplankton population were investigated in Ch$\check{o}$nsu Bay, the Korean western coast. Diurnal fluctuations of phytoplankton standing crop are associated with semidiurnal tidal cycle, as high concentration at low tide and low at high tide. In monthly variations of phytopolankton standing crop, the 1st peak occurrs in March and the 2nd one in August. The study area could be divided into two parts, outer bay and inner bay according to the physical and biological factors such as water temperature and salinity, and phytoplankton distribution patterns. The northern waters of the bay, however, may be affected by irregular fresh water influx through the lock of the dike. Because of the hydrographical differences among the surveyed stations, phytoplankton species succession patterns of each station have some differences. On the whole in this study area, Paralia sulcata and Skeletonema costatum are dominant species all the year round. However, except June, Paralia sulcata, a tychopelagic diatom is not dominant species at Station 6 (northern end of the bay). This seems to be caused by the fact that the waters of northern part of the bay is less turbulent than that of the outer bay. The result of principal component analysis (PCA) indicates that Ch$\check{o}$nsu Bay is normal coastal ecosystem where the environmental conditions are cycled in a year, and water temperature and nitrogenous nutrients such as nitrate, nitrite and ammonia are major factors to influence the annual cycle of environmental conditions.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.251-251
• /
• 2021

최근 기후변화로 인한 집중호우의 영향으로 홍수 시 댐으로의 유입량이 설계 당시보다 증가하여 댐의 안전성 확보가 필요하다(감사원, 2003). 이에 건설교통부(2003)는 기후변화와 댐 노후화에 대비하여 치수능력증대사업을 추진하여 댐의 홍수배제능력을 확보하였고, 환경부(2020)에서는 40년 이상 경과된 댐을 대상으로 스마트 안전관리체계 구축을 통한 선제적 보수보강, 성능개선 및 자산관리로 댐의 장수명화를 목적으로 댐의 국가안전대진단을 추진하고 있다. 이에 본 연구에서는 댐 시설(여수로)의 노후도 평가 시 활용 될 수 있는 여수로 표면손상 원인규명에 대하여 3차원 수치모형(FLOW-3D 및 COMSOL Multiphysics)을 통해 검토하고자 한다. 연구대상 댐은 𐩒𐩒댐으로 지형 및 여수로를 구축하였으며, 계획방류량(200년 빈도) 및 최대방류량(PMF) 조건에서 모의를 수행하였다. 수치모의 계산의 정확도 검토를 위하여 Baffle의 설치를 통하여 시간에 따른 유량의 변화를 설계 값과 비교하였고 오차가 1.0% 이내를 만족하는 것을 확인하였다. 여수로 표면손상의 다양한 원인 중 기존연구(USBR, 2019)를 통하여 공동침식(Cavitation Erosion) 및 수력잭킹(Hydraulic Jacking)에 초점을 두었으며 방류조건 별 공동지수(Cavitation Index)산정을 통하여 공동침식 위험 구간을 확인하였다. 이음부의 균열 및 공동으로 인한 표층부 콘크리트의 탈락현상을 가속화시키는 수력잭킹 검토를 위하여 국부모형을 구축하였고 음압력(Negative Pressure), 정체압력(Stagnation Pressure), 양압력(Uplift Pressure)의 분포를 확인하였다. 최종적으로 COMSOL Multiphysics를 통하여 압력분포에 따른 구조해석을 수행하여 폰 미세스(Von Mises) 등가응력 및 변위를 검토하여 콘크리트의 탈락가능성을 확인하였다. 본 연구는 여수로 공동부 및 균열부에서의 손상메커니즘을 확인할 수 있는 기초적인 연구이지만 향후에는 다양한 지형조건 및 흐름조건에서의 압력분포 분석 및 유체-구조물 상호작용(Fluid-Structure Interaction, FSI)모의를 수행한다면 구조물 노후도 및 잔존수명 평가에 필요한 손상한계함수 도출이 가능할 것으로 기대된다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.3
• /
• pp.575-583
• /
• 2017

Various types of flow patterns around the stepped weir and spillway, such as the skimming flow over such structures and the wave-type flow with a standing undular hydraulic jump and roller downstream of the structures, are developed in open channels. Unsteady three-dimensional numerical simulations are carried out using a hybrid RANS-LES turbulence modeling approach and the volume of fluid method for resolving free surface fluctuations to represent the turbulent flow including the skimming flow and wave-type flow over a stepped weir installed in a rectangular channel. The comparison of numerical results with an existing experimental measurement reveals that the present numerical simulations reasonably well reproduce the turbulent flow passing the stepped weir, in terms of time-averaged velocity profiles at selected locations downstream of the weir, flow topology characterized by the wave-type and skimming flows, the maximum height and length of the standing wave and the length of reattachment of recirculating zone. The numerical result further elucidates the distinct flow behaviors of the wave-type and skimming flow by presenting instantaneous intense variations of free surface and velocity vectors, the distributions of Reynolds shear stress and turbulent kinetic energy and three-dimensional complex features of coherent structures and total pressure distribution.

• Korean Journal of Ecology and Environment
• /
• v.46 no.4
• /
• pp.488-498
• /
• 2013

A three-dimensional hydrodynamic model was applied to the Lake Euiam. The lake has three inflows, of which Gongji Stream has the smallest flow rate and poorest water. The dam-storage volume, watershed area, lake shape and discharge type of the Chuncheon Dam and the Soyang Dam are different. Therefore, it is difficult to analyze the water plume and mixing pattern due to the difference of the two dams regarding the amount of outflow and water temperature. In this study, we analyzed the effects of different characteristics on temperature and conductivity using the model appropriate for the Lake Euiam. We selected an integrated system supporting 3-D time varying modeling (GEMSS) to represent large temporal and spatial variations in hydrodynamics and transport of the Lake Euiam. The model represents the water temperature and hydrodynamics in the lake reasonably well. We examined residence time and spreading patterns of the incoming flows in the lake based on the results of the validated model. The results of the water temperature and conductivity distribution indicated that characteristics of upstream dams greatly influence Lake Euiam. In this study, the three-dimensional time variable water quality model successfully simulated the temporal and spatial variations of the hydrodynamics in the Lake Euiam. The model may be used for efficient water quality management.

• Solar Energy
• /
• v.16 no.2
• /
• pp.113-122
• /
• 1996

This study presents experimental results of heat transfer characteristics of P.C.M. during outward melting process in a vertical cylinder. The experiment was carried out in six conditions, i. e., three different inlet temperature($7^{\circ}C,\;4^{\circ}C\;and\;1^{\circ}C$) and two directions of working fluid(upward and downward). Melting P.C.M. produced a bell-shaped phase change interface. When the inlet temperature was $7^{\circ}C$, the lower region remained at $4^{\circ}C$ until the temperature of upper region reached $4^{\circ}C$. This was due to the state of maximum density of the lower region. When the direction of the working fluid in the case of $7^{\circ}C$, inlet temperature, was upward, the rate of melting and the total melting energy were higher than when it's direction was downward. But the rate of melting and the total melting energy appeared higher value as it's direction was downward when the inlet temperature is $4^{\circ}C$ and $1^{\circ}C$.

• KSBB Journal
• /
• v.4 no.3
• /
• pp.259-265
• /
• 1989

In a batch fermentation process using carrot cell suspension culture, the effect of initial concentration of limiting nutrients(glucose and phosphate) on the specific growth rate and cell yield was investigated. The period of exponential growth is about 2 days and the consumption of glucose and phosphate in culture medium was very small when the initial concentrations of glucose and phosphate are 1.49g/1 ~ 3.01g/l and 0.08 ~ 0.32mM respectively. The specific growth rate of cells ranged from TEX>$0.15\;day^{-1}$ to $0.3\;day^{-1}$ irregularly. And the ratio of the initial concentration of glucose to phosphate did not affect the specific growth rate and the cell yield. The increase on cells had linear relationship with the consumption of limiting nutrients. Therefore, the increase of cells was found to be more influenced by the concentration of glucose than that of phosphate.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.51-51
• /
• 2020

본 연구에서는 기수역에서의 GPS 전자부자를 활용한 계측 데이터와 염분측정 데이터를 비교분석하여 GPS 전자부자의 거동 특성이 담수의 실제 거동특성과 같이 일치하게 나타나는지 확인하고, GPS 전자부자에 대한 활용성을 증명하고자 하였다. 기수역에서의 담수와 해수의 분포를 확인하기 위해서는 많은 인력과 장비를 소모하며 수리량과 염분도에 대한 측정을 통해 분석을 할 수 있는데, 대표적인 수리량 측정장비인 ADCP 또는 ADV는 각종 측정 한계들이 존재한다. 따라서 이러한 기수역에서의 수체 구간별 흐름 특성이 어떻게 나타나는지 확인하기 위해서 GPS 전자부자를 활용하고자 하였으며. GPS 전자부자의 데이터와 수직방향으로 측정한 염분도 데이터와 비교하고자 하였다. 수영강 좌수영교 상류 1km지점에서 주입하였으며 간조 시와 만조 시에 유하시켜 수영강에 위치한 좌수영교와 수영교에서 각각 좌측, 중간, 우측에서 수심방향으로 측정한 염분도를 상층 중층 하층으로 평균하여 비교하였다. 본 연구에서 사용한 GPS 전자부자는 표면부자이기 때문에 만조 시 하류방향으로 더 뻗어 나가는것으로 확인하였고, 간조 시에는 흐름이 더디거나 정체하는 것으로 나타났다. 이러한 계측 결과는 담수의 흐름 특성과 일치하게 나타나는 것을 확인하였고 이러한 GPS Floater를 활용한다면 굳이 각종 수질을 측정하지 않아도 흐름 상황으로 간조인지 만조인지에 대한 상황과 염분 분포를 대략적으로 알 수 있다. 이러한 GPS 전자부자의 위치데이터와 시간을 잘 이용한다면 ADCP의 유속 측정에 대한 단점을 보완할 수 있는 Lagrangian 타입의 유속을 측정 할 수 있다. 이러한 GPS 전자부자를 하천에서 선주입으로 활용한다면 각 구간별로 수체에 대한 흐름과 유속들을 분석할 수 있을 것으로 사료된다. 또한 GPS 전자부자를 좀더 활용하여 IoT 기반 수질센서 등과 같은 각종 센서가 GPS Floater에 결합이 된다면, 흘러가면서 각종 데이터 정보취득을 통해 수체내 흐름을 분석하는 것뿐만 아니라 수환경 유출오염사고들에 대한 초기대응에 많은 도움이 될 것으로 사료 된다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.5
• /
• pp.247-259
• /
• 2017

Numerical model with LPT (Lagrangian Particle Tracking) module was used to understand the variation of residence time in the outer sea of the Sihwa lake result operating from the Sihwa tidal power plant. Numerical model was composed in order to investigate the spatial distribution characteristics, the average residence time in each area was calculated by dividing the outer sea area of Sihwa lake into 4 areas. The average residence time of the areas appeared to be increase as it entered the areas located in the inner bay (13 days) from the area located in most outer sea (3 days) both before and during operation. Variation of average residence time by areas were increased in the area that was located in the most outer sea of during operation compared to before operation, and decreased in the other area. Artificial discharges from tidal power plant induces particle traps in the formation of vortex in the area located in the most outer seas, entrainment in the remaining areas, which affects variation in residence time. In other words, the jet flow generated during drainage and the change in the residence time due to the vortex and entrainment action indicate the increase horizontal mixing of water in the outer sea and in the inner bay.

• Journal of Radiation Protection and Research
• /
• v.32 no.2
• /
• pp.79-88
• /
• 2007

When an accident occurs at nuclear power plant and radionuclide material is released to the area around the plant, public evacuation is considered as a measure to protect the safety of the residents nearby. This study draws factors required to estimate evacuation time and make estimation of the time to evacuate all residents from the EPZ of Wolsong site in consideration of traffic condition in the neighborhood and on the basis of field data around the site for each factor. The traffic capacity and the traffic volume by season were investigated for the traffic analysis and simulation within EPZ of Wolsong site. As a result, the background traffic volume by season were established. To estimate TGT(Trip Generation Time), the questionnaire surveys were carried out for resident and transient. The TSIS code was applied to traffic analysis in the events of daytime/night and normal/adverse weather under normal day/summer peak traffic condition. The results showed that the evacuation time required for total vehicles to move out from EPZ took generally from 118 to 150 minutes. The evacuation time took longer maximum 17 minutes at night than daytime during summer peak traffic.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.30 no.2
• /
• pp.200-208
• /
• 2024

The occurrence a fire on a training ship with a large number of people on board can lead to severe casualties. Hence the Seafarers' Act and Safety Life At Sea(SOLAS) emphasizes the importance of the abandon ship drill. Therefore, in this study, the training ship of Mokpo National Maritime University, Segero, which has a large number of people on board, was selected as the target ship and the likelihood and severity of fire accidents on each deck were predicted through the preliminary hazard analysis(PHA) qualitative risk assessment. Additionally, assuming a fire in a high-risk area, a simulation of evacuation time and population density was performed to quantitatively predict the risk. The the total evacuation time was predicted to be the longest at 501s in the meal time scenario, in which the population distribution was concentrated in one area. Depending on the scenario, some decks had relatively high population densities of over 1.4pers/m², preventing stagnation in the number of evacuees. The results of this study are expected to be used as basic data to develop training scenarios for training ships by quantifying evacuation time and population density according to various evacuation scenarios, and the research can be expanded in the future through comparison of mathematical models and experimental values.