• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.821-827
• /
• 2023

In this study, the aircraft technical standards of the Korea and the United States were analyzed to derive the dynamometer test procedure required to prove the compatibility for flight test certification of the metal brake pad for transport aircraft. Since the design modification of the brake systems is classified as a major change, the STC(Supplemental Type Certificate) and the PMA(Parts Manufacturer Approval) are required. In accordance with the TSO-C135a, the technical standard order for brake system in the United States, the design landing-stop test, accelerate-stop test, and most severe landing stop test were selected among the test items for flight test. The conditions for the dynamometer test are determined according to the specifications provided by aircraft manufacturer, and the brake pad condition, deceleration, and the number of test are defined according to the TSO-C135a.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.266-267
• /
• 2017

A numerical investigation of the stage separation behavior of two-body vehicle focusing on its flow characteristics were carried out. For this simulation, separation of a booster from vehicle was modeled by a chimera grid system and calculated by using commercial code, CFD-FASTRAN$^{TM}$. Consideration of a spring force, gravity and relative acceleration of a booster was the essential factor that simulates the realistic situation. In this study, It was validated that the booster separation time decreases with increase in flight mach number and angle of attack. In view of the results so far achieved, it was expected that the dynamics modeling and boundary condition set up applied in this study will be helpful in a estimation of a safe stage separation and event sequence of flight test.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.921-924
• /
• 2010

정지궤도 위성을 제외한 대부분의 저궤도 위성 및 심우주 관측용 위성은 임무를 수행하면서 하루동안에도 제한된 시간동안만 지상국과의 통신이 가능하다. 따라서 위성 운영에 고수준의 자율적 제어기능이 요구된다. OBCP(On-Board Control Procedures)는 별도로 개발된 언어로 작성한 작은 용량의 스크립트 프로그램을 통해 위성을 제어하는 기능을 제공한다. 이러한 방법을 통해 지상관제 시에 위성의 임무수행동안 수행되어야 하는 다양하고 복잡한 운영 시퀀스를 용이하게 준비하고 업로드할 수 있다. OBCP는 위성비행소프트웨어와는 분리된 별도의 서브시스템으로 수행되기 때문에 새로운 위성운영 프로시져의 생성을 위해 위성비행소프트웨어의 수정, 재검증, 코드업로드 등의 절차가 요구되지 않으며 지상에서 개발 및 검증시험을 완벽하게 수행할 수 있다. 본 논문에서는 기존의 저궤도 관측위성에서 사용되었던 위성의 자율적 제어 시퀀스 기능과 OBCP의 기능을 비교하여 설명하고, 실제 Herschel and Plank 위성에 활용된 예를 통해 OBCP의 개념 및 설계 방안에 대하여 소개한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.76-79
• /
• 2011

천리안 위성은 우리나라 최초의 정지궤도 복합 지구관측 위성으로 기상관측, 해양관측과 통신서비스 임무를 수행하는 중대형위성으로 2011년 6월 27일에 성공적으로 발사되어 약 6개월간의 시험운영기간을 거쳐 현재는 실시간 서비스를 제공하고 있다. 천리안 위성은 한국항공우주연구원(KARI) 총괄 주관하에 2003년 9월 개발을 시작으로 프랑스의 EADS-Astrium과 공동 개발되었다. 천리안 위성은 이미 EADS-Astrium에 의해 통신 위성 본체 플랫폼으로 우주 인증된 Eurostar3000(이하 E3000) 플랫폼을 근간으로 제작되었다. 본 논문에서는 천리안 위성 플랫폼 탑재컴퓨터에 탑재되어 위성체 전반을 운영하는 비행소프트웨어의 구성 및 기능에 대해 기술한다. 또한 기존의 EADS-Astrium사의 E3000 비행소프트웨어 생산라인을 바탕으로 천리안 위성 비행소프트웨어를 개발하기 위한 개발 절차 형상을 소개한다. 본 논문에서 기술한 재생산을 위한 개발 절차에 대한 접근 방법은 위성 임베디드 소프트웨어 시스템과 같은 mission critical 시스템이면서 이미 검증된 소프트웨어를 재사용하고 사용자의 요구사항을 만족시키기 위해 일부 기능을 변경 및 추가 개발하여 통합된 소프트웨어를 생산해야하는 소프트웨어 개발체계의 실질적인 한 예를 보여주고 있다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.1
• /
• pp.28-35
• /
• 2009

This paper derives the equation of coordinated attitude formulation taking into account the orbital dynamics of a target vehicle and the attitude of a tracking satellite in geostationary orbit. The coordinated attitude is always to communicate with the ground station during the target tracking. Because the tracking satellite could perform high angle maneuver, MRP parameters having no singular point are used. Also for the sequential tracking of several target vehicles, the equation automatically making a coordinated attitude is suggested. Coordinated attitude flying and sequential tracking are confirmed through simulations. In short, this paper shows that a satellite could track a target vehicle and communicate with ground station simultaneously using the derived equation of coordinated attitude even though without a accuracy sensor.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.1
• /
• pp.16-24
• /
• 2012

In this study, two-stage hypersonic scramjet vehicle was designed for the flight condition of Mach number 6. In order to launch at sea level, two stage concept was applied. The first stage of the vehicle is solid rocket-powered and is mounted under the second stage. The second stage is powered by scramjet propulsion system and gas wings. The suggested mission scenario is to deliver 0.2 ton payload to the range of 2,000 km. For the first step of conceptual design, trajectory of air vehicle was calculated by 3-DOF trajectory code. Based on the result of trajectory code, scramjet engine design and mass estimation were performed by non-equilibrium nozzle flow code and NASA's HASA model, respectively. In order to find best solution, all steps of designing process was iterated until they was reached.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.10
• /
• pp.112-119
• /
• 2003

Design analysis and grow1d test on propellers for 50 m-long airship propulsion were conducted. The design analysis code developed by adopting the vortex-blade-element theory was applied to the design of optimum propeller at the condition of maximum flight speed at sea level. In order to validate the performance of the propeller, ground test of the propeller was performed, and thrust and torque were measured for several different pitch angles at static condition. The power coefficients and thrust coefficients obtained by the test compared well with the analysis results.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.309-317
• /
• 2011

In this study, two-stage hypersonic scramjet vehicle was designed for the flight condition of Mach number 6. In order to launch at sea level and Mach number 0, two stage concept was applied. The first stage of the vehicle is rocket-powered and is mounted under the second stage. The second stage is scramjet-powered propulsion system and has wing. The suggested mission scenario is to deliver 0.2 ton payload to the range less of 2000km. For the first step of conceptual design, trajectory of air vehicle was calculated by 3-DOF trajectory code. Based on the result of trajectory code, scramjet engine design and mass estimation were performed by non-equilibrium nozzle flow code and NASA's HASA model, respectively. In order to find best solution, all step of designing process was iterated until they were converged.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.4
• /
• pp.91-98
• /
• 2018

A numerical investigation of stage separation behavior of a two-body vehicle focusing on its flow characteristics is carried out. For this simulation, the separation of a booster from a vehicle is modeled using a chimera grid system and calculated with commercial code, $CFD-FASTRAN^{TM}$. Consideration of spring force, gravity and relative acceleration of a booster is the essential factor of a realistic simulation. In this study, it is validated that the booster separation time decreases with an increase in flight Mach number and angle of attack. In view of results thus far achieved, it is expected that the dynamics modeling and boundary condition set-up applied in this study will be useful for estimating safe stage separation and event sequencing of flight tests.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.12
• /
• pp.1184-1191
• /
• 2009

In order to reduce the download around the Smart UAV(SUAV) at Transition mode, flow control using synthetic jet has been performed. Many of the complex tilt rotor flow features are captured including the leading and trailing edge separation, and the large region of separated flow beneath the wing. Based on the results of part 1 of the present work, synthetic jet is located at 0.01c, $0.95c_{flap}$ and it is operated with the non-dimensional frequency of 0.5, 5 to control the leading edge and trailing edge separation. Consequently, download is substantially reduced compared to with no control case at transition mode using leading edge jet only. The present results show that the overall flight performance and stability of the SUAV can be remarkably improved by applying the active flow control strategy based on synthetic jet.