• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 춘계종합학술대회
• /
• pp.226-230
• /
• 2000

본 논문에서는 CPLD 칩을 이용하여 QPSK 복조기를 구현하고, 그 결과를 검토하였다. 복조기는 비트 동기를 포착하는 STR(Symbol Timing Recovery) loop와 반송파 동기를 포착하는 CPR(Carrier Phase Recovery) loop로 구성된다 STR loop는 DD-Gardner 방식을, CPR loop는 빠른 반송파 포착을 위하여 Decision-Directed 동기화 방식을 이용하여 구현한 결과를 제시하였다. Altera사의 Design Compiler를 이용하여 FLEX10K 칩에 합성한 QPSK 복조기의 속도는 약 2 (Mbps)의 전송속도를 가지며, ASIC으로 구현시에는 CPLD 속도의 5-6배 이상의 고속화가 가능하다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1993년도 춘계학술대회 논문집
• /
• pp.19-21
• /
• 1993

The perovskite type ferroelectrics has been studied to make a flim out of ceramic capacitor with large capacity and miniaturization. In this study. we make a capacitor in small size and high capacity, and measure SEM and dielectric permitivity of BCTM ceramic capacitor.

• 천문학회보
• /
• 제34권2호
• /
• pp.66.1-66.1
• /
• 2009

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.109-117
• /
• 2004

The objective of this study is to investigate the effect of the spray characteristics on the etching characteristics for the optimization of etching process in the micro fabrication industry. The etching characteristics such as etching rate and etching factor were investigated under different etching conditions. To compare with the etching characteristic, the spray characteristics such as droplet size and velocity were measured by PDA system. The etching rate was increased in case of high spray pressure and in the region of spray center. The etching factor was increased with decrease in the distance from nozzle tip and increase in the etchant temperature. It was found that the spray characteristics were correlated with the etching characteristics.

• Toxicological Research
• /
• 제19권1호
• /
• pp.73-82
• /
• 2003

To evaluate influence of Saposhnikovia divaricata (Turcz.) Schischk extract on rat, Saposhnikovia divaricata (Turcz.) Schischk extract was diluted with 0.9% saline (100 mg/ml/kg, 10 mg/ml/kg, and 1 mg/ml/kg, respectively), and each of diluted test material extract was daily treated subcutaneously for 4 weeks and single-treated subcutaneously for 2 weeks. There were no significances in body weight analysis, urinary analysis, and ophthalmological test. However, in serum biochemical analysis and hematological analysis, we found some significances in high and middle dose group compared with control group. These significances in serum biochemical analysis and hematological analysis may be not induced by test material, because it was not found to be significant from control group in histopathological examination. Therefore, it was concluded that NOEL (No Observed Effect Level) of test material extract may be higher than all treatment doses used in this study, and Saposhnikovia divaricata (Turcz.) Schischk extract may be a non-toxic material.

• Asia pacific journal of information systems
• /
• 제16권1호
• /
• pp.127-144
• /
• 2006

The K-means algorithm is widely used at the initial stage of data analysis in data mining process, partly because of its low time complexity and the simplicity of practical implementation. Cluster validity indices are used along with the algorithm in order to determine the number of clusters as well as the clustering results of datasets. In this paper, we present a performance comparison of sixteen indices, which are selected from forty indices in literature, while considering their applicability to nonhierarchical clustering algorithms. Data sets used in the experiment are generated based on multivariate normal distribution. In particular, four error types including standardization, outlier generation, error perturbation, and noise dimension addition are considered in the comparison. Through the experiment the effects of varying number of points, attributes, and clusters on the performance are analyzed. The result of the simulation experiment shows that Calinski and Harabasz index performs the best through the all datasets and that Davis and Bouldin index becomes a strong competitor as the number of points increases in dataset.

• 전자공학회논문지A
• /
• 제31A권9호
• /
• pp.18-25
• /
• 1994

Previously. TCM decoder has been using the Viterbi algorithm that was complex. In order to reduce the complexity of decoder. we proposed the “modified decoding algorithm using the path back method” and the modified decoding algorithm which extends the previous decoding algorithm to be able to applied to TCM decoder in this paper. On the gaussian and impulsive noise channel. Monte-Carlo simulation is used for analyzing the TCM performance and proving the efficiency of proposed decoding algorithm.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.284-285
• /
• 2015

발전설비의 불시정지, 예상치 못한 전력수요 급증 등 전력수요와 공급의 불확실성에 대비하기 위해 예비력을 운영 하고 있다. 최근 풍력발전원의 지속적인 증가로 풍력발전 출력값과 예측값의 차이인 예측오차에서 기인하는 풍력발전출력의 불확실성 또한 예비력 산정 시 고려할 주요 요소로 논의되고 있다. 본 논문에서는 발전력의 상당 부분을 풍력발전원이 담당하는 전력시스템에서 산정된 운영예비력의 적정성을 평가하는 방안을 제시하였다. 기존의 전력수요 예측오차, 발전기 불시정지 뿐만 아니라 풍력발전원의 불확실성을 모두 고려해 산정된 운영 예비력의 적정성을 평가한다.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.448-453
• /
• 2005

For under-water communication system, due to limit of bandwidth and reflect of under-water wave, it is difficult to implement high-reliability high-speed digital communication system. To apply high-reliability and high-speed communication system for under-water system, the efficient combine the channel design with the use of multiple transmit and/or receive antennas. Therefore this paper analyze the space time coded system for under-water communication environment.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권5호
• /
• pp.738-745
• /
• 2009

Underwater acoustic communication has multipath error because of reflection by sea-level and sea-bottom. The multipath of underwater channel causes receive signal to make error floor. In this paper, we propose the underwater communication system using various channel coding schemes such as RS coding, convolutional code, turbo code and concatenated code for overcoming the multipath effect in underwater channel. As shown in simulation results, characteristic of multipath error is similar to that of random error. So interleaver has not effect on error correcting. For correcting of error floor by multipath, it is necessary to use strong channel codes like turbo code. Turbo code is one of the iterative codes. And the performance of concatenated codes including RS code has better performance than using singular channel codes.