• Journal of architectural history
• /
• v.13 no.3
• /
• pp.7-19
• /
• 2004

This study is to comprehend the interior space of the Royal Palace in the 15th Century, the early years of Joseon Dynasty. The subject of this study is limited to the center of the Royal Palace, that is Jeongjeon(正殿, the royal audience chamber) and Haengrang(行廊, which encloses Jeongjeon on four sides and has many rooms). It is very important to understand the usage of the interior space because the architectural space consists of the space unified by the organic function of the interior and the exterior space. But there are few studies on the interior space of Jeongjeon and Haengrang at the Royal Palace. Therefore, the purpose of this study is to understand the interior space of those buildings. The result of this study is following. Haengrang has several uses such as a night duty room, a storehouse, a government office or a banquet hall etc. So the interior spaces were finished with various methods that were suitable for the use of each room, and the material of the floor were the ground, Maru(the wooden floor) or Ondol(the Korean traditional heating system) There were held many kinds of ceremonies in Jeongjeon, and the government officials could not enter the inside of that building and took part in the ceremony on the front court of Jeongjeon, except the men performing the ceremony. But the high ranking officials could enter the inside when King gave a banquet and there, they prostrated themselves before King. They sat down with their legs crossed on the ground floor instead of sitting on a chair. When King held tea ceremony with Chinese envoys in Jeongjeon, they sat on Gyoui(交倚, a kind of armchair). Then, the government officials performing the ceremony in Jeongjeon prostrated himself around the King and the Chinese envoys and others stood around them.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1713_1714
• /
• 2009

본 연구는 LED 광원을 이용한 절전형 라인 조명제어장치의 개발에 관한 것이다. 기본 광원은 5W급 고휘도 LED Lamp를 기본적으로 1~5개의 개별 램프를 제어하며 LED Lamp의 불량상태와 운전상태 감시를 위한 정전류 방식의 구동 기능을 포함하고 여러 단계의 밝기 변화와 절전, 방열을 고려하여 PWM 방식으로 구동 밝기조절 및 점멸 주기 제어기능을 갖는다. 이장치는 도로의 라인조명용 단위장치로 구성될 수 있으며 개별적으로 중앙통제시스템과 통신제어기능을 수행할 수 있게 구성된 시스템이다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.2
• /
• pp.141-146
• /
• 2014

This paper describes the implementation and algorithm of handwritten character recognition using mobile touch screen. The system is consisted of PXA320 processor, capacitive touch panel and QT4 interface. The proposed algorithm extracts pattern characteristics with straight, left circle, right circle on the inputting character. The definition of character is determined by 3-way tree searching method. The performance of proposed algorithm is verified using alphabet character. It is suitable to apply the mobile touch screen because of simple algorithm.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.23-24
• /
• 2005

This paper investigated the mechanical and electrochemical properties of Al alloys in a slow strain rate test under various potential conditions. In general, Al and Al alloys do not corrode on formation of a film that has resistance to corrosion in neutral solutions. In seawater, however, $Cl^-$ ions lead to the formation and destruction of a passive film. In a potentiostatic experiment, the current density after 1200 sec in the potential range of $-0.68{\sim}-1.5 V$ was low. Comparison of the maximum tensile strength, elongation, and time to fracture indicated that the optimum protection potential range was from -1.5 to -0.7 V(SSCE).

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.117-118
• /
• 2007

정전비용 또는 전력공급지장비용은 평가방식이 다양하고 나라마다 그 결과값도 다양하여 범위가 상당이 크기 때문에 적합한 공급지장비용을 결정하는 것은 굉장히 어렵다. 하지만 전력공급시스템마다의 각각의 특성에 맞는 방식을 찾는 노력은 필요하다고 할 수 있다. 본 논문에서는 전력공급지장비용을 회피하기위한 국가적 전력공급시스템 측면에서의 전력공급비용을 수용가가 전력시장에서의 공급지장의 대안으로 지불할 의사가 이미 내포된 비용으로 평가하여, 발전설비와 전력수송경로 측면을 연결하여 용량요금과 예비전력 기본요금 분석을 통해 공급지장비용을 분석하였다.

• Journal of Energy Engineering
• /
• v.8 no.4
• /
• pp.583-591
• /
• 1999

this paper proposes a new approach for calculating the reliability indices of generation system, such as interruption frequency and duration, by using the moment matching technique Two separate expressions are derived, one for the loss of load expectation(LOLE) and the other for the loss of load frequency (LOLF). These expressions are combination of exponentials and are therefore easily integrable and can be readily evaluated. In this paper, the parameters of the distribution functions of the LOLE and LOLF are evaluated by using Genetic Algorithm and Complex Method, and the proposed approach is quite comparable with the other methods at the aspect of accuracy and efficiency.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.674-680
• /
• 2017

Touch Screen Panel (TSP) is a widely used personal handheld device and as a large display apparatus. This study examines micro bump fabrication technology for TSP test process. In the testing process, as TSP is changed, should make a new micro bump for probing and modify the testing program. In this paper we use a maskless lithography system to confirm the potential to fabricatemicro bump to reducecost and manufacturing time. The requiredmaskless lithography system does not use a mask so it can reduce the cost of fabrication and it flexible to cope with changes of micro bump probing. We conducted electro field simulation by pitches of micro bump and designed the lithography pattern image for the maskless lithography process. Then we conducted Photo Resist (PR) patterning process and electro-plating process that are involved in MEMS technology to fabricate micro bump.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.10
• /
• pp.80-86
• /
• 2014

A low-noise readout circuit is studied for 2-D capacitive microbolometer focal plane arrays (FPAs). In spite of the merits of the integration method, a simple and effective pixelwise readout circuit without integration is used for input circuit because of a small pixel size and narrow noise bandwidth. To reduce the power consumption and the kT/C noise, which is the dominant noise of the capacitive microbolometer FPAs with small capacitance, a new correlated double sampling (CDS) is used for columnwise circuit. The proposed circuit has been designed using a $0.35-{\mu}m$ 2-poly 4-metal CMOS process for a microbolometer array with a pixel size of $50{\mu}m{\times}50{\mu}m$. The proposed circuit effectively reduces the kT/C noise and the other low-frequency noise of microbolometer, and the noise characteristics of the fabricated chip have been verified by measurements. The rms noise voltage of the proposed circuit is reduced from 30 % to 55 % compared to that of the simple readout input circuit, and the noise equivalent temperature difference (NETD) of the proposed circuit is very low value of 21.5 mK.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.1
• /
• pp.9-15
• /
• 2019

Here, we present a facile route to fabricate a vertically stacked 3D porous structure-based triboelectric nanogenerator (TENG) that can be used to harvest energy from the friction in a repetitive contact-separation mode. The unit component of TENG consists of thin Al foil electrodes integrated with microstructured 3D foams such as Ni, Cu, and polyurethane (PU), which provide advantageous tribo-surfaces specifically to increase the friction area to the elastomeric counter contact surfaces (i.e., polydimethylsiloxane, PDMS). The periodic contact/separation-induced triboelectric power generation from a single unit of the 3D porous structure-based TENG was up to $0.74mW/m^2$ under a mild condition. To demonstrate the potential applications of our approach, we applied our TENGs to small-scale devices, operating 48 LEDs and capacitors. We envision that this energy harvesting technology can be expanded to the applications of sustainably operating portable electronic devices in a simple and cost-effective manner by effectively harvesting wasted energy resources from the environment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.3
• /
• pp.539-546
• /
• 2018

Recently, as the solar power generation market is rapidly increasing, interest is focused on research for minimizing the output of the solar cell module. The role of the power optimizer is important when inconsistencies occur in photovoltaic power generation. In the conventional system, centralized inverter method and microinverter method are mainly used. In this paper, we analyze the problem of power generation efficiency loss due to the incompatibility of existing system configuration methods. We also proposed a module - type power compensation method that can improve the mismatch caused by shading. The proposed module - based power optimizer is implemented and compared with the existing operation method. From the simulation result, it was confirmed that the efficiency of the proposed operation method is improved compared to the existing method.