• 제목/요약/키워드: 정오보고

검색결과 501건 처리시간 0.028초

문제중심학습을 위한 지능형 교수 시스템 설계 및 구현 (Design and Implementation of Intelligent Tutoring Systems for Problem Based Learning)

  • 정운선;최용석
    • 한국정보과학회:학술대회논문집
    • /
    • 한국정보과학회 2005년도 가을 학술발표논문집 Vol.32 No.2 (2)
    • /
    • pp.808-810
    • /
    • 2005
  • 문제중심학습은 학습자 스스로의 통제에 의한 학습자 중심의 자기주도적 학습이 특징이므로 학습자의 적극적인 참여를 유도하기 위하여 학습과점에 적절한 전략이 필요하다. 본 논문의 학습내용은 논리식 간략화이며, 학습자의 적극적인 참여 유도를 위하여 논리식 간략화 과정과 결과에 대한 즉각적인 피드백을 제공하는 지능형교수시스템(Intelligent Tutoring Systems)을 구현한다. 피드백에 관련된 알고리즘을 지능적으로 제공하기 위하여 논리식 간략화 알고리즘은 Tabulation Method를 이용한다. 본 논문의 지능형교수시스템(ITS)을 학습에 적용하면 논리식의 간략화 과정식과 결과 식에 대한 정오 판정은 물론 학습 활동에 맞아 떨어지는 즉각적인 피드백이 제공되므로 학습자 스스로 학습내용에 대한 인지도를 확인할 수 있다. 또한 학습 활동에 꼭 필요한 피드백을 제공하므로 학습에 대한 흥미를 유발시키고 지속화하여 적극적이 학습참여와 완전학습이 가능하다.

  • PDF

덤프 소각기에서 유해폐기물 분해에 대한 수치해석 (A Numerical Simulation of Hazardous Waste Destruction in a Dump Incinerator)

  • 전영남;정오진;채종성
    • 한국대기환경학회지
    • /
    • 제16권6호
    • /
    • pp.665-674
    • /
    • 2000
  • A major source of the hazardous waste generated is from chemical industries producing plastics, herbicides, pesticides and chlorinated solvents. All of these processes produce a class if hazardous waste termed the chlorinated hydrocarbons(CHCs), either directly or from undesirable side reactions. In this study, we investigated the destruction characteristics of hazardous waste through incineration. A nonequilibrium combustion model was used to describe the effect of the chemical kinetics due to the flame inhibition characteristics of $CCl_4$ which was used as the surrogate of hazardous waste. A parametric screening studies was made in a dump incinerator proposed in this study. The dump incinerator showed high $CCl_4$ DRE(Destruction and Removal Efficiency) as 5 nines. $CCl_4$/CH$_4$ ratio appeared to be most important in the destruction of $CCl_4$ through incineration.

  • PDF

저공해 compact 유해폐기물 dump 소각기 개발 (The Development of Hazardous Waste Compact Dump incinerator for Low Emissions)

  • 전영남;채종성;정오진
    • 한국대기환경학회지
    • /
    • 제16권6호
    • /
    • pp.653-663
    • /
    • 2000
  • A lot of hazardous wastes are discharged as by-products of working process by industrial development. Hazardous wastes is physical characteristics of difficult destruction at hight temperature. Numerical simulation and combustion experiment performed of dump incinerator for hazardous waste incineration. For the numerical simulation, the SIMPLEST algorithm was used to ensure rapid converge A K-$\varepsilon$ model was incorporate for the enclosure of turbulence flow. Combustion model was used by ESCRS (extended simple chemically reacting system) model available of CHEMKIN thermodynamic data for the source term of species conservation equation or energy equation. Radiation model is used by six flux model. A parametric screening studies was carried out through numerical simulation and experiment. Residence time and concentration in the incinerator was strongly dependent on the parameters of mixture velocity, mixture equilibrium ratio, surrogate velocity and surrogate equilibrium ratio.

  • PDF

Nd:YAG레이저를 이용한 스텐실 절단공정II -레이저의 공정변수가 스텐실 절단특성에 미치는 영향- (Stencil cutting process by Nd:YAG laser II -Influence of process parameters on cutting characteristics of stencil-)

  • 이제훈;서정;김정오;신동식;이영문
    • 한국레이저가공학회지
    • /
    • 제4권2호
    • /
    • pp.47-57
    • /
    • 2001
  • This study deals with the laser cutting of stencil for the PCB. The most important aim of this study is to determine optimal conditions which make good-qualify stencil in Nd:YAG laser cutting. We made an experiment according to various variables (power. type of mask. gas pressure, cutting speed, and pulse width) and analyzed the cutting characteristics (surface roughness, kerf width. dross) . Each variable has optimal value for good-qualify cut edge under fixed condition. And neural network after learning experimental data with a million time iteration could predict surface roughness of cut edge under arbitrary condition approximately.

  • PDF

F-변환을 이용한 Quadtree 기반의 무손실 영상압축 (Lossless image compression based Quadtree with F-transform)

  • 김능식;윤정오;박영호;황찬식
    • 한국산업정보학회논문지
    • /
    • 제8권1호
    • /
    • pp.26-32
    • /
    • 2003
  • 정보기술의 발달로 인해 컴퓨터 통신이 원활해지면서 방대한 양의 영상자료 처리 기술이 한층 더 요구되고 있다. 본 논문에서는 영상 자료들의 효율적으로 전송과 저장을 위해 쿼드트리 알고리즘과 F-변환을 이용한 무손실 영상압축 방법을 제안하였다. 제안된 무손실 영상압축 방법은 컴퓨터 모의 실험을 통하여 기존의 L-JPEG, LOCO-I, CALIC 압축방법 보다 압축성능이 현저히 향상됨을 확인하였다.

  • PDF

우리나라 1등수준망의 조정계산 (Adjustment Computation of the Korean Primary Levelling Network)

  • 이석찬;조규전;고영호;이영진
    • 한국측량학회지
    • /
    • 제5권2호
    • /
    • pp.12-23
    • /
    • 1987
  • 본 연구에서는 국립지리원에서 1974년-1986년에 수행한 우리나라 제 1차 1등수준측량 데이터의 철저한 분석이 이루어졌다. 각 노선별 정확도의 분석과 조정결과의 검토를 통하여 각국의 경우와 비교ㆍ평가되었다. 연구결과로는 수준망에 내재된 정오차가 전반적으로 크게 나타나고 있으나 국제측지학협회(IAG)의 정밀수준측량 정확도를 만족하고 있으므로 지도제작이나 건설공사용으로 타당함을 보여주고 있다.

  • PDF

사진측정을 위한 카메라의 해석적검정모델 개발 (Development of Analytical Calibration Model of Camera in Photogrammetry)

  • 박운영;이용희;손덕재
    • 한국측량학회지
    • /
    • 제3권2호
    • /
    • pp.32-38
    • /
    • 1985
  • 본 연구는 사진에 포함한 정오차를 제거하기 위한 카메라의 해석적 검정모델을 개발하고, 그 효용성 및 문제점을 제시하는데 목적을 두고 있으며 이를 위해 지상측정용 카메라를 이용한 근거리 사진 측양에서의 렌즈왜곡수차를 분석하였다. 얻어진 절대좌표로부터,$K_1$항만을 포함하는 검정모델이 측정용 카메라에 효과적임을 알 수 있었으며, 측정용 카메라에서도 필름변형에 대해 보정해야 함을 알 수 있었다.

  • PDF

비측정용 카메라의 원격조종에 의한 대축척 지형정보 획득 (Acquisition of Large Scale Geographical Information by Remote Control of Non-Metric Camera)

  • 강준묵;윤희천;배연성
    • 대한공간정보학회지
    • /
    • 제1권2호
    • /
    • pp.177-184
    • /
    • 1993
  • 소규모 지역에 대한 대축척 정밀 지형정보를 경제적으로 얻기 위해 외부표정요소를 정확히 산출하고, 무선조종이 가능한 무인 비행선에 정오차 보정요소를 결정한 35mm 비측정용 카메라를 탑재하여 촬영하였다. 해석에 필요한 지상기준점은 GPS측량으로 상대적 위치를 결정하여 정확도 향상을 기하였다. 또한 해석도화기에 의해 대축척 지형도를 제작하여 정확도 검증을 함으로써 그 응용가능성을 제시하였다.

  • PDF

우리나라 고용량 MLCC 기술 개발의 역사와 전망 (Development History and Trend of High-Capacitance Multi-layer Ceramic Capacitor in Korea)

  • 홍정오;김상혁;허강헌
    • 한국세라믹학회지
    • /
    • 제46권2호
    • /
    • pp.161-169
    • /
    • 2009
  • MLCC (Multi-layer Ceramic Capacitor) is the most important passive component in electronic devices such as HHP, PC and digital display. The development trend of MLCC is a miniaturization with increasing the capacitance. In this paper, a development history of the high capacitance MLCC in Korea was introduced, and the necessity of the finer $BaTiO_3$ was explained in the viewpoint of the issued electrical and dielectric properties of high capacitance MLCC. The bottleneck technologies to realize the high capacitance was shortly introduced, followed by the prediction of the development trend of MLCC in near future.

한글 단어재인에 있어서 글자처리와 낱자의 지각 (II) (Syllabic Processing and Latter Perception in Korean Word Recognition (II))

  • 김정오;김재갑
    • 한국정보과학회 언어공학연구회:학술대회논문집(한글 및 한국어 정보처리)
    • /
    • 한국정보과학회언어공학연구회 1992년도 제4회 한글 및 한국어정보처리 학술대회
    • /
    • pp.423-433
    • /
    • 1992
  • 낱자 또는 음절들을 매우 짧게 제시하고 차폐로 지운 후 두 낱자 중하나를 선택하는 과제 (Reicher, 1969)를 사용하여 음절 맥락에서 낱자 지각에 영향을 주는 변수들과 그 배후 지각과정들을 검토하였다. 자모 조합유형이 음절 내 낱자의 정체 파악에 체계적으로 영향을 주고 있었고, 예상과는 달리 음절 내의 낱자들이 단독으로 제시되는 낱자 보다 잘 파악되지 않는 음절열등효과가 일관되게 관찰되었다. 본 연구의 세 실험 결과들을 상호작용활성화 모형과 초보지각자-기억자 모형에 비추어 논의하였다.

  • PDF