• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2022.10a
• /
• pp.352-354
• /
• 2022

2020년 기준 금정터널 유지관리 계측센서의 정상 작동 실효성 검증 조사결과 정상작동 유효율은 14-2공구 6개 단면의 계측센서 41개중 7.3%, 14-3공구 10개 단면의 계측센서 83개중 24.1%로 편차가 큰 것으로 나타났으며, 전체 16개 단면의 계측센서 124개중 18.5%로 나타났다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.60.1-60.1
• /
• 2011

본 연구에서는 풍력 터빈 블레이드의 다분야 통합 최적 설계를 위하여, 진동하는 비정상 공력하중에 의한 작동 수명을 고려한 최적화 과정을 수행하였다. 최적화 대상으로는 NREL의 1.5MW 급 풍력터빈을 baseline 으로 하였고, NREL의 FAST 프로그램을 이용하여 발전기의 정격 출력 및 블레이드에 작용하는 비정상 공력 하중 특성을 분석하였다. 최적화 수행 시 블레이드 형상의 효율적인 구현을 위해 형상모델링 함수를 이용하여 코드 길이와 트위스트 분포를 모델링하였다. 그리고 상용 MDO Framework 인 Piano를 이용하여 블레이드 루트부의 비정상 공력하중 조건을 완화시키는 최적화 설계를 수행하였다. 정격출력을 유지하면서도 Out of Plain 방향의 하중 조건을 개선하여 보다 긴 작동 수명을 기대할 수 있는 블레이드 형상을 설계하였다.

• Journal of the Society of Disaster Information
• /
• v.18 no.1
• /
• pp.80-90
• /
• 2022

Purpose: The objective of this study was to improve smart monitoring and monitoring management technology in long tunnels by investigating and analyzing the normal operation rates of monitoring hardware in the long tunnels of high-speed and urban railways. Method: This study evaluated, analyzed, and compared the normal operation rate of 6-8 types of monitoring hardware for each long tunnel, targeting three high-speed railway lines with a long tunnel (i.e., Suseo-Pyeongtaek Line, Gyeongbu Line, and Honam Line) and two urban railway groups with a long tunnel (i.e., Seoul Metro Lines 5, 6, and 7, and 9). Result: The rank of the normal operation rate of monitoring hardware was in the order of Suseo-Pyeongtaek High-Speed Railway (92.1%), Seoul Metro Lines 5, 6, and 7 (85.8%), Seoul Metro Line 9 (85.2%), Gyeongbu High-speed Railway (80.5%), and Honam High-speed Railway (46.7%). Conclusion: The mean normal operation rate of the monitoring hardware in the three high-speed railway long tunnels was 83.4%, and that of the two urban railway long tunnels was 85.5%, indicating that the deviation between them was small. The mean normal operation rate of the monitoring hardware in the long tunnels of the five high-speed and urban railway lines was 84.2%.

• Journal of Energy Engineering
• /
• v.4 no.1
• /
• pp.95-102
• /
• 1995

작동유체로서 비등점이 서로 다른 2종류, 즉 2성분 혼합물을 사용한 2상 밀폐 열싸이폰은 단일성분의 열싸이폰 보다 공학적으로 우수한 성능을 갖는다. 따라서 상 분리 현상이 나타나지 않은 안정적인 혼합물인 물/에탄올의 혼합물을 작동유체로 사용한 열싸이폰의 작동특성이 실험적으로 수행되었다. 실험에서는 시동성, 정상상태 작동, 경사시 작동특성 및 열전달 한계(Dry-out) 등에 관한 2성분 열싸이폰의 작동특성에 관해서 고찰되었다.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2012.04a
• /
• pp.42-45
• /
• 2012

최근 국내 지진 발생 위험이 높아짐에 따라 지진 시 소방시설이 정상적으로 작동할 수 있도록 규정할 수 있는 개정법률안이 발표되었다. 소방시설설치유지 및 안전관리에 관한 법률 제 9조의 2에 신설되어 있으며 지진이 발생할 경우 소방시설이 정상적으로 작동될 수 있도록 내진성능이 확보된 소방시설을 설치하도록 규정하고 있지만 그 세부기준은 아직 제시되어 있지 않다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.6
• /
• pp.110-117
• /
• 2003

The operational characteristics of the landing gear retraction/extension depend on the complexity of design variables operational/environmental conditions. In order to meet the requirements of minimum stow area and performance, the integration of the landing gear system requires operational kinematic and dynamic analysis considering an effect of its related system. This study investigates operational dynamic behaviors of the T-50 landing gear system using ADAMS. Taking into account for various operational/environmental conditions, an analysis of dynamic behavior on the landing gear operational characteristics is performed with experience derived from a wide range of proprietary designs. Analytical results are presented for discussing the effects of temperature, aerodynamic and maneuver load on normal/emergency operation of the landing gears and doors. This analysis leads us to the conclusion that the proposed program is shown to be a better quantitative one that apply to a new development and troubleshooting of the landing gear system.

• Fire Science and Engineering
• /
• v.22 no.2
• /
• pp.116-120
• /
• 2008

According to the Fire Services Act revised in 2005, it has been required to set up sprinkler systems to all floors to the newly builded apartments having above 11 floors. But, according to the Fire Services Act before 2005, it had been required to set up sprinkler systems from 16 floors to the top floors to the apartments having above 16 floors. This case is the accident that a victim was dead by the fire which is inferred as an accidental fire by a cigarette butt in a 17th floor apartment unit in an apartment having 17th floors and that the bereaved family called in question why the sprinklers non worked at the fire. Through the field investigation, we checked that the sprinklers worked well when the fire detectors at the 16th floor of the apartment were operated and that the sprinklers non worked when the fire detectors at the 17th floor of the apartment were operated. We made clear that the cause of the sprinkler non-working at the 17th floor is the programming error of the sprinkler controller.

• Tribology and Lubricants
• /
• v.1 no.1
• /
• pp.20-29
• /
• 1985

많은 윤활 부품의 성능과 수명은 초기작동기간에 금속표면에서 일어나는 현상들에 의하여 좌우된다. 특히 혼합마착구역(Mixed film region)에서나 윤활막의 두께가 몇십 마이크론의 정도가 되는 EHD(Elastohydrohynamic)윤활구역에서 작동하는 경우엔 더욱 중요하다. 이러한 경험적 현상에 의해 상대운동하는 두마찰면의 초기 작동과정을 길들이기(run-in, breaking-in)라고 부르고 "마찰 부분의 형상이나 마모 및 윤활 마찰특성이 향상되어가는 과정" 으로 정의한다. 보통 길들이기 과정이 끝나면 표면 모양은 더이상 변하지 않고 마모나 마찰 특성이 일정하게되며 이 단계를 정상 상태라고 부른다. 길들이기과정이 중요시되는 것은 이 과정에서 마모는 정상 상태보다 심하고 Scuffing 혹은 Scoring현상이라고 부르는 마찰면 손상의 가능성이 항상 존재하기 때문이다. 이 현상은 보통의 마모나 부식 또는 피로파손의 형태와는 달리 갑작스런 발생으로 부품이나 기관의 부분적 혹은 완전 파손을 유발함으로써 설계나 제조 과정에 문제를 제기하는 요인으로 오래전부터 알려져 왔다.부터 알려져 왔다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.39 no.7
• /
• pp.634-642
• /
• 2011

A numerical analysis of steady/unsteady flow applying cavitation model and moving mesh method was carried out in order to analyze flow and response characteristics inside the pilot valve which controls the flight actuator system. The flow of the valve was assessed according to operation temperature and time. This research has found that valve characteristics became stable at above a specific temperature and the cavitation affected valve's performance. Internal pressure and response characteristics of the valve were analyzed and flow characteristics of steady and developed unsteady flow were confirmed to be matched each other.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.7
• /
• pp.813-822
• /
• 2012

Abnormal operating sounds radiated from a moving transfer robot in LCD (liquid crystal display) product lines have been used for the fault detection line of a robot instead of other source signals such as vibrations, acoustic emissions, and electrical signals. Its advantage as a source signal makes it possible to monitor the status of multiple faults by using only a microphone, despite a relatively low sensitivity. The wavelet packet transform for feature extraction and the artificial neural network for fault classification are employed. It can be observed that the abnormal operating sound is sufficiently useful as a source signal for the fault diagnosis of mechanical components as well as other source signals.