• 월간산업보건
• /
• s.297
• /
• pp.77-78
• /
• 2013

• Journal of the Korean GEO-environmental Society
• /
• v.21 no.1
• /
• pp.5-12
• /
• 2020

Vibration propagated from seismic sources has damping according to distance and amplification and reduction characteristic in different regions according to topography and geological structure. The vibration propagated from the seismic source to the bedrock is largely affected by the damping according to the separation distance, which can be simply estimated through the damping equation. However, it is important to grasp geological information by location because vibration estimation transmitted to the surface are affected by the natural period of the soil located above the bedrock. Geotechnical investigation data are needed to estimate the seismic intensity based on geological information. If there is no Vs profile, the standard penetration tests are mainly used to determine the soil parameters. The Integrated DB Center of National Geotechnical Information manages the geotechnical survey data performed on the domestic ground, and there is the standard penetration test information of 400,000 holes. In this study, the possibility of quantitation the amplification coefficient for each region was examined to calculated the physical interactive seismic intensity based on geotechnical information. At this time, the shear wave column diagram was generated from the SPT-N value and ground response analysis was performed in the target area. The site coefficients for each zone and the seismic intensity distribution for the seismic motion present a significant difference according to the analysis method and the regional setting.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.2
• /
• pp.339-346
• /
• 1999

A RF receiver section for INMARSAT-C external mounting unit was designed, fabricated and evaluated. Using a INA-03184, the high gain amplifier consists of matched amplifier type. Active bias circuitry can be used to provide temperature stability without requiring the large voltage drop or relatively high-dissipated power needed with a bias stabilization resistor. The bandpass filter was used to reduce a spurious level. As a result, the characteristics of the receiver section implemented here show 60 dB in gain, 44.83 dBc in a spurious level. The voltage standing wave ratios(VSWR)of input output port are less than 1.8:1, respectively.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06a
• /
• pp.551-554
• /
• 2011

덮어쓰기 제약(overwirte limitation)과 삭제 횟수 제한(limitted erase cycle)이 있는 플래시 메모리의 특징이 의하여, 플래시 메모시는 시스템에서 요청한 쓰기 요청보다 많은 수의 쓰기 연산을 수행하게 되는데, 시스템에서 요청한 쓰기요청과 실제 쓰기 연산 간의 비율을 쓰기 증폭 인자(Write Amplification Factor, 이후 WAF)라 한다. WAF는 성능과 신뢰성에 중요한 요소로 본 논문에서는 WAF를 예측 할 수 있는 분석모델을 제안한다. 제안된 모델은 페이지 사상 FTL, 블록 사상 FTL, 혼합 사상 FTL 등 다양한 FTL에서 WAF를 예측 할 수 있으며, 예측에 사용되는 매개 변수로 이용율(utilization), 무작위율(randomness), 연관도(Associativity)만을 사용하여 단순하다는 특성이 있다. 본 논문은 실제 Linux 환경에서 측정한 WAF와 비교 분석 결과 제안된 모델이 WAF를 정확히 예측 할 수 있음을 발견하였다.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.2
• /
• pp.139-146
• /
• 1998

This paper proposes a regularized iterative image restoration using method of conjugate gradient considering a priori information. Compared with conventional regularized method of conjugate gradient, this method has merits to prevent the artifacts by ringing effects and the partial magnification of the noise in the course of restoring the image degraded by blur and additive noise. Proposed method applies the constraints to accelerate the convergence ratio near the edge portions, and the regularized parameter suppresses the magnification of the noise. As experimental results, I show the superior convergence ratio and the suppression by the artifacts of the proposed method compared with conventional methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.3
• /
• pp.485-491
• /
• 2003

In this paper, We designed the multi-stage amplifier having high gain/low noise characteristics for terrestial repeater of direct digital satellite broadcasting system. In the design the amplifier, we optimized the parameters to have the stable operation between gain, noise figure and stability. The first stage of amplifier can be specified low noise impedance matching, 2nd stage to 5th stage show constant gain and stable operation and final stage of amplifier shows high gain impedance matching. As a result of experiment at the frequency of digital satellite terrestial, show 68dB gain under 2,4dB noise figure and 63dB dynamic range in the 11.7GHz-12.7GHz frequency range, it is a good agreement of communication channel amplifier requirements for satellite terrestial repeater.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.647-653
• /
• 2005

According to the design concept of microwave front-end, a low noise amplifier block using HBT cascode topology is proposed to provide high gain and low noise figure with low bias current. We has implemented MMIC-LNA with a modified configuration using inductors to show low noise at the emitter and base of cascoded HBT-MMIC amplifier. The measured performance of the designed MMIC-LNA at 3.7GHz are a gain of 19dB, noise figure of 2.7dB and image rejection of 35dBc using a supply of 3mA and 2.7V. We can convinced that cascoded amplifier block to fulfill a high gain, low noise and image rejection if microwave front-end receiver is designed by cascode MMEC-LNA with the active image rejection filter.

• Journal of KIISE:Software and Applications
• /
• v.33 no.10
• /
• pp.862-867
• /
• 2006

To restore image degraded by blur and additive noise in the optical and electrical system, a regularized iterative restoration is used. A regularization operator is usually applied to all over the image without considering the local characteristics of image in conventional method. As a result, ringing artifacts appear in edge regions and the noise is amplified in flat regions. To solve these problems we propose an adaptive regularization iterative restoration considering the characteristic of edge and flat regions using directional regularization operator. Experimental results show that the proposed method suppresses the noise amplification in flat regions, and restores the edge more sharply in edge regions.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.873-876
• /
• 2005

This paper presents a new current transient test technique for wideband CMOS Op Amps. This technique monitors the transient power supply current and output responses of the CMOS Op Amp to automatically differentiate faulty and fault-free op amps. The wideband op amp is designed using 0.25${\mu}$m CMOS technology. We present detailed simulation results for a wideband op amp. We show that catastrophic faults in op amps can be detected and analyzed by monitoring power supply currents and output responses. This technique is inexpensive and simple.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.2037-2042
• /
• 2014

Three methods for gain saturation tone application were compared for optical wavelength division multiplexing transmission using more than 32 channels. The methods are to use high power distributed feedback laser diodes, to use amplified light sources, and lastly to use one saturation tone and several WDM light sources. 1532.3 nm, 1545.7 nm, and 1558.2 nm for the wavelength dependency of the saturation tone were also compared. As a result, the effect of amplified spontaneous emission noise caused by an amplifier was very slight. long wavelength for a saturation tone caused 1 dB gain reduction and its reason was analyzed.