• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.344-350
• /
• 2003

In this paper, we propose a novel sharing method ordering the events occurring between users collaborated with the common telecomputing environment. We realize the sharing method with multimedia data to improve the coworking effect using teleprocessing network. This sharing method advances the efficiency of communicating projects such as remote education, tele-conference, and co-authoring of multimedia contents by offering conveniences of presentation, group authoring, common management, and transient event productions of the users. As for the conventional sharing white board system, all the multimedia contents segments should be authored by the exclusive program, and we cannot use any existing contents or program. Moreover we suffer from the problem that ordering error occurs in the teleprocessing operation because we do not have any line-up technology for the input ordering of commands. Therefore we develop a method of retrieving input and output events from the windows system and the message hooking technology which transmits between programs in the operating system In addition, we realize the allocation technology of the processing results for all sharing users of the distributed computing environment without any error. Our sharing technology should contribute to improve the face-to-face coworking efficiency for multimedia contents authoring, common blackboard system in the area of remote educations, and presentation display in visual conference.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.1
• /
• pp.239-246
• /
• 2017

There are various transversal structures (small dams or drop structures) in median and small streams in Korea. Most of them are concrete structures and it is so hard to exclude low-level water. Unless drainage valves and/or gates would not be installed near bottom of bed, sediment from upstream should be deposited and also contaminants attached to the sediments would devastatingly threaten the water quality and ecosystem. One of countermeasures for such problem is the bypass pipe installed underneath the transversal structure. However, there is still issued whether it would be workable if the gravels and/or stones would roll into and be not excluded. Therefore, in this study, the conditions to exclude the rip stone which enter into the bypass pipe was reviewed. Based on sediment transport phenomenon, the behavior of stones was investigated with the concepts from the critical shear stress of sediment and d'Alembert principle. As final results, the basis condition (${\tau}_c{^*}$) was derived using the Lagrangian description since the stones are in the moving state, not in the stationary state. From hydraulic experiments the relative velocity could be obtained. In order to minimize the scale effect, the extra wide channel of 5.0 m wide and 1.0 m high was constructed and the experimental stones were fully spherical ones. Experimental results showed that the ratio of flow velocity to spherical particle velocity was measured between 0.5 and 0.7, and this result was substituted into the suggested equation to identify the critical condition wether the stones were excluded. Regimes about the exclusion of stone in bypass pipe were divided into three types according to particle Reynolds number ($Re_p$) and dimensionless critical shear force (${\tau}_c{^*}$) - exclusion section, probabilistic exclusion section, no exclusion section. Results from this study would be useful and essential information for bypass pipe design in transveral structures.

• Journal of Technology Innovation
• /
• v.17 no.1
• /
• pp.1-48
• /
• 2009

Recently we have found some symptoms that R&D fiscal incentives might not work well what it has intended through the analysis of current statistics of firm's R&D data. Firstly, we found that the growth rate of R&D investment in private sector during the recent decade has been slowdown. The average of growth rate (real value) of R&D investment is 7.1% from 1998 to 2005, while it was 13.9% from 1980 to 1997. Secondly, the relative share of R&D investment of SME has been decreased to 21%('05) from 29%('01), even though the tax credit for SME has been more beneficial than large size firm, Thirdly, The R&D expenditure of large size firms (besides 3 leading firms) has not been increased since late of 1990s. We need to find some evidence whether fiscal incentives are effective in increasing firm's R&D investment. To analyse econometric model we use firm level unbalanced panel data for 4 years (from 2002 to 2005) derived from MOST database compiled from the annual survey, "Report on the Survey of Research and Development in Science and Technology". Also we use fixed effect model (Hausman test results accept fixed effect model with 1% of significant level) and estimate the model for all firms, large firms and SME respectively. We have following results from the analysis of econometric model. For large firm: i ) R&D investment responds elastically (1.20) to sales volume. ii) government R&D subsidy induces R&D investment (0.03) not so effectively. iii) Tax price elasticity is almost unity (-0.99). iv) For large firm tax incentive is more effective than R&D subsidy For SME: i ) Sales volume increase R&D investment of SME (0.043) not so effectively. ii ) government R&D subsidy is crowding out R&D investment of SME not seriously (-0.0079) iii) Tax price elasticity is very inelastic (-0.054) To compare with other studies, Koga(2003) has a similar result of tax price elasticity for Japanese firm (-1.0036), Hall((l992) has a unit tax price elasticity, Bloom et al. (2002) has $-0.354{\sim}-0.124$ in the short run. From the results of our analysis we recommend that government R&D subsidy has to focus on such an areas like basic research and public sector (defense, energy, health etc.) not overlapped private R&D sector. For SME government has to focus on establishing R&D infrastructure. To promote tax incentive policy, we need to strengthen the tax incentive scheme for large size firm's R&D investment. We recommend tax credit for large size film be extended to total volume of R&D investment.

• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.392-400
• /
• 2007

This experiment was conducted to evaluate effects of various periods of rye silage feeding on the growth performance, blood characteristics, and carcass quality of finishing pigs. A total of sixteen [($Landrace{\times}Yorkshire{\times}Duroc$)] pigs (90.26 kg in average initial body weight) were tested in individual cages for a 30 day period. Dietary treatments included 1) CON (basal diet), 2) S10 (basal diet for 20 days and 3% rye silage for 10 days) 3) S20 (basal diet for 10 days and 3% rye silage for 20 days) and 4) S30 (3% rye silage for 30 days). There were no significant differences in the ADG and gain/feed ratio among the treatments(p>0.05), however the ADFI was higher in pigs fed the CON diet than with pigs fed diets with rye silage (p<0.05). The DM digestibility was higher with the S20 diet than with the S30 diet (p<0.05). With regard to blood characteristics, pigs fed rye silage had a significantly reduced cortisol concentration compared to pigs fed the CON diet (p<0.05). The backfat thickness was higher with the CON diet than with the S20 or S30 diets (p<0.05). Regarding the fatty acid contents of the leans, the C18:0 and total SFA were significantly higher with the CON diet than with the other diets (p<0.05). However, the C18:1n9, total MUFA and UFA/SFA levels were significantly lower with the CON diet than the other diets (p<0.05). Regarding the fatty acid contents of fat, the levels of C18:1n9 and MUFA were similar with the S20 and S30 diets, however, these levels were higher than with the CON or S10 diets (p<0.05). In conclusion, feed intake and DM digestibility were affected by rye silage, and the cortisol concentration, backfat thickness and fatty acid composition of pork were positively affected by feeding pigs rye silage.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.4
• /
• pp.242-255
• /
• 2006

In the recent years, Popularization of mobile devices such as Smart Phones, PDAs and MP3 Players causes rapid increasing necessity of Power management technology because it is most essential factor of mobile devices. On the other hand, despite low price, hard disk has large capacity and high speed. Even it can be made small enough today, too. So it appropriates mobile devices. but it consumes too much power to embed In mobile devices. Due to these motivations, in this paper we had suggested methods of minimizing Power consumption while playing multimedia data in the disk media for real-time and we evaluated what we had suggested. Strict limitation of power consumption of mobile devices has a big impact on designing both hardware and software. One difference between real-time multimedia streaming data and legacy text based data is requirement about continuity of data supply. This fact is why disk drive must persist in active state for the entire playback duration, from power management point of view; it nay be a great burden. A legacy power management function of mobile disk drive affects quality of multimedia playback negatively because of excessive I/O requests when the disk is in standby state. Therefore, in this paper, we analyze power consumption profile of disk drive in detail, and we develop the algorithm which can play multimedia data effectively using less power. This algorithm calculates number of data block to be read and time duration of active/standby state. From this, the algorithm suggested in this paper does optimal scheduling that is ensuring continual playback of data blocks stored in mobile disk drive. And we implement our algorithms in publicly available MPEG player software. This MPEG player software saves up to 60% of power consumption as compared with full-time active stated disk drive, and 38% of power consumption by comparison with disk drive controlled by native power management method.

• Journal of the Society of Disaster Information
• /
• v.13 no.4
• /
• pp.442-454
• /
• 2017

Biological weapon is manipulated and produced from microorganisms such as bacteria, virus, rickettsia, fungi etc. It is classified as one of the Weapons of Mass Destruction (WMD) along with chemical weapon and radiological weapon. Biological weapon has a number of operational advantages over the other WMDs including ease of development and production, low cost and possibility of covert dissemination. In this study we analyze the history of biological weapon's development and the existing biological threats. Then, we predict the social impact of biological attack based on the physical properties of biological agent and infection mechanisms. By analyzing the recognition, dispersion pattern of agents, characteristics of the diseases in the biological weapon related historical events such as Sverdlovsk anthrax accident, 2001 anthrax attack, we found out some of the facts that biological attack would not likely to be recognized rapidly, produce large number of the exposed, increase number of paients who suffed from severe respiratory illness. It would lead the public health and medical service providers to be struggled with hugh burden. Base on the facts that we found from this case study, we suggested the main capabilities of public health required to respond to bioterrorism event efficiently. Syndromic surveillance and other reporting system need to be operated effeciently so that any suspicious event should be detected promptly. the pathogen which suspected to be used should be identified through laboratory diagnostic system. It is critical for the public health agency to define potentially exposed population under close cooperation with law enforcement agencies. Lastly, massive prophylaxis should be provided rapidly to the people at need by operating human and material resources effeciently. If those capacities of public health are consistantly fortified we would be able to deal with threat of bioterrorism successfully.

• Journal of Nutrition and Health
• /
• v.51 no.2
• /
• pp.186-198
• /
• 2018

Purpose: This study was performed to evaluate the utilization of a current national Food Composition Database (FCDB) and to investigate demand for nutrients that should be added or supplemented in order to expand the national FCDB. Methods: Surveys were constructed based on the utilization of FCDB, use of a food and nutrition analysis program, utilization and importance of nutritional ingredients, and nutritional ingredients desired to be supplemented in the national FCDB. Self-administered surveys were obtained from 349 food and nutrition specialists, including dietitians, nutrition teachers, food industry workers, professors, and researcher. Results: Exactly 73.6% of respondents used the FCDB, and 90.5% experienced using various food and nutrition analysis programs. Professors and researchers frequently utilized protein, carbohydrate, and lipid nutrients in the FCDB. Among vitamins, vitamin C, vitamin A, and vitamin D were frequently used. Among minerals, sodium and calcium were highly used. Among the subjects, 17.4% of subjects have used phytochemical DB. Carotenoids, anthocyanins, and isoflavones among phytochemicals were frequently used, in that order. Respondents desired an additional data on sugars, vitamin D, folic acid, selenium, iodine, dietary fiber, vitamin $B_{12}$, and carotenoids in the FCDB. Conclusion: The survey results indicate that the current FCDB is actively used for various purposes, although it is necessary to construct a national nutrition database with additional nutrients.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.88-89
• /
• 2010

최근 인간의 활동범위와 영역이 확대되고 산업이 발전하면서 인간의 삶과 지속가능한 발전 등 도시 기후에 관한 관심도 높아지고 있다. 산업혁명 이후 도시화와 산업화로 인해 인구가 증가하고 도시지역으로 집중됨으로써 도시 열섬화 현상에 대한 도시환경문제가 부각되고 있다. 이는 최근까지도 도시개발에 있어서 기능과 효율성이 우선시 되어 도시기후에 대한 배려가 이루어지지 못하고 있으며, 오히려 과도한 냉난방을 가동하는 등 쾌적한 실내 환경 조성을 위한 노력만을 행해왔다. 도시화에 따른 도시의 열환경 구조의 변화는 토지이용의 변화에 따른 피복상태와 밀접한 관련이 있다는 연구들이 수행된 바 있다. 이렇듯 도시화가 진행됨에 따라서 도심 지표면을 덮고 있는 포장재도 변하고 있다. 대표적인 토지피복재로는 콘크리트와 아스팔트 등의 인공포장재, 수계, 삼림 등으로 크게 나누어 볼 수 있다. 최근 도심의 발달로 인해 도심의 표면은 점차 인공포장재인 아스팔트와 콘크리트로 덮여지고 있다. 인공포장재는 맑은 여름철 낮에 받아들인 열을 야간에도 머금고 있어 도시열섬현상의 주요원인이 된다. 도시화가 진행됨에 따라 토지이용형태가 변화하고 있으며 이러한 토지피복의 변화는 그 지역의 기온과 풍향, 풍속뿐만 아니라 지표온도도 변화시키므로 도시 열환경 구조에 적지 않은 영향을 미치고 있다. 과거에는 자연 환경과 도시공간에 대한 인식이 다른 분야로 나누어져서 다루었지만 현재 위성영상 기술의 발달로 많은 공간 정보를 파악할 수 있게 된 바 도시기후변화에 더욱 직접적이고 근본적인 접근이 쉬워졌다. 원격탐사기법의 활용은 위성자료를 이용하여 동시간대 평면적인 열구조를 정량적으로 파악하는데에 중요한 자료를 제공하여 도시지역을 덮고 있는 인공자재의 존재가 도시열섬의 형성과 밀접하게 연관이 있다는 사실을 짐작할 수 있다. 따라서 도시기후변화의 문제점을 더욱 적극적으로 해결하기 위해서는 토지이용에 따른 지표면 온도 상승의 현황을 파악하고 이를 저감 시킬 수 있는 대책들이 수립되어야 한다. 본 연구는 보다 세분화된 도시 열환경을 정량적으로 분석 평가하기 위해서 토지피복별 분류를 3가지로 대구시 중구 경북대학교 부속 고등학교(이하 사대부고 지점)를 도심지역으로, 경상남도 창녕군 창녕읍 우포늪(이하 우포지점)을 수계지점으로, 경상북도 안동시 길안면 만음리(이하 안동지점) 지점과 대구시 칠곡군 동명면 득명리 팔공산 한티재 도립공원(이하 팔공지점)을 산림으로 분류하여 연구하였다. 대구 계명대학교 기후환경연구실에서 보유하고 있는 AWS(Automatic Weather Station) 자료로 기상요소를 분석하였으며, MODIS Terra 위성영상을 이용하여 지표온도를 추출하고 분석하였다. 또 기상요소와 지표온도를 이용해 회귀식을 도출하여 추정기온을 산출하였다. 그 결과 첫째, 계절에 따른 기온의 시간변화는 여름의 평균기온이 $25.13^{\circ}C$와 $24.12^{\circ}C$로 사대지점과 우포지점의 평균기온이 가장 높게 나타났으며, 이는 도심에서 발생되는 인공열의 영향으로, 우포지점은 수계의 특징이 반영된 결과라 할 수 있다. 둘째, 계절에 따른 풍속의 시간변화는 여름의 경우 우포지점의 풍속이 1.63m/s로 가장 높은 반면 안동지점의 풍속이 0.27m/s로 가장 낮은 것으로 나타났다. 겨울의 경우 팔공지점의 풍속이 1.82m/s로 가장 높게 나타났다. 토지피복에 따른 지표면의 변화가 도시기후에 미치는 영향을 정량적으로 평가하고, 또 지표면 온도와 기온과의 차이를 알아보기 위하여 MODIS 위성 영상을 이용하여 세 지점을 대상으로 토지피복에 따른 열환경을 평가 분석하여 다음과 같은 결론을 얻을 수 있었다. 첫째, MODIS 위성영상을 이용하여 산출한 지표면 온도는 여름철 주간에 안동지점의 경우 주변지역에 비해 지표면 온도가 약 $26^{\circ}C$로 낮게 나타났으며 우포지점의 경우 수계가 가지는 열 완충능력으로 약 $27^{\circ}C$의 낮은 지표면 온도를 나타내었다. 사대지점의 경우 약 $34^{\circ}C$이상의 높은 지표면 온도를 나타내었다. 둘째, MODIS 위성영상을 이용하여 산출한 지표면 온도와 관측된 기온과의 회귀식을 도출하여 상관분석 한 결과, 모든 지점의 값에서 상관성 및 신뢰도가 높은 것으로 나타났다. 셋째, 상관분석의 결과를 통하여 추정한 기온은 지표면 온도와의 차이가 있지만 유사한 패턴의 결과로 추출되었다. 이러한 결과로 볼 때 도시의 인공자재를 이용한 건축과 개발이 도시열섬현상을 유발하는데 중요한 역할을 하는 것을 정량적으로 평가할 수 있었다. 따라서 본 논문의 연구결과를 바탕으로 도시계획에 있어서 인공구조물에 의한 기온과 풍속이 받는 영향을 고려하여 도심의 인공구조물의 배치나 자재에 대한 개발이 이루어져야 할 것이며 열교환의 방해 및 바람순환이 확보되는 구조로 개선되어야 할 것이다.

• Management & Information Systems Review
• /
• v.35 no.2
• /
• pp.67-81
• /
• 2016

The purpose of this study was to investigate lots of problems that the current tax appeal system has, which are becoming serious issues as tax appeal cases are recently increasing. Those problems include the unreasonable procedure and period of deliberation on tax appeal cases, permission of a same tax appeal by more than one governmental agencies and the compulsory transposition system of tax appeal cases. All of these problems should be rectified in order to ensure that the currently tax appeal system protect taxpayers' rights and interests effectively. According to the current tax appeal system, the period from the receipt of tax appeal cases to ruling on them is up to 90 days. This is unrealistic, so that period should be allowed to be extended if those cases about more complicated taxation or if they are even harder to be treated for any reason. At present, chief of Tax Tribunal has to unconditionally accept resolution from the meeting of tax judges and make a ruling accordingly because he has no right to reject that resolution. But now, it's time to establish legal grounds based on which the chief suggests the tax judges to reconsider their resolution if it is undoubtedly wrong. Currently, there's a relatively little acceptance of tax appeals from people who can't financially afford to designate a proxy for them. To solve this problem, lots of efforts to make socially recognized the necessity to relive those people's rights and interests and make widely known the Public Proxy of Tax Appeal System. The current tax appeal system allows the Board of Audit and Inspection to be an appealer. This means taxation may be deliberated on by more than one governmental agencies. It is so inefficient. Therefore, tax appeal by the board should be only about taxation that they found unacceptable by audit and inspection. Except for this, it is not allowed that the Board of Audit and Inspection file tax appeals that are, in turn, necessarily transported to the National Taxation. Esecially, the transposition should be a procedure that is occasionally taken. In sum, this study investigated problems with the current tax appeal system, and made suggestions about solutions that are not theoretical but practical.

• Sijohaknonchong
• /
• v.20
• /
• pp.141-171
• /
• 2004

Even though only 3 sijo are in high school textbook. through these 3 sijo each type can be understood in that each represents pyung sijo, sasul sijo, and present sijo. To learn with learner-centered activities, which aim for full knowledge acquisition regarding literary works, as the preparing stage, students can learn what theyll learn by teachers. Sijo are, so to speak, formed with three chapters, and stand for the world that is colorless, scentless, and flavorless. So, the theme can be found with ease. Compared with other genres, sijo can be formed creating background with ease. Moreover, sijo are not too long, so learners can paraphrase it. Sijo that express private experiences with the everyday language can be related to other genres or everyday language. So, sijo are last to present. In the teaching phase, on the gradation of concretion and gradation, writing or presentation activities are presented. After classroom, learners keep a reaction journal. In the phase of concretion and gradation, learners can apprehend that typical differences of the emotions of poetic speakers is from typical differences, even though emotions of poetic speakers of (1)$\cdot$(2)$\cdot$(3) that is each stand for pyung sijo, sasul sijo, and present sijo are roughly summarized loneliness, desolateness, and gloominess. Moreover, these typical differences are from social, political. and cultural settings, namely, the differences of contexts. In this teaching model. learners should prepare for content regarding context and text before the class. Teachers should act as an assistant to help learners pre-understand their subjective experiences and imaginations.