• Communications of Mathematical Education
• /
• v.16
• /
• pp.217-218
• /
• 2003

제7차 교육과정의 기본방향인 '21세기의 세계화 정보화 시대를 주도할 자율적이고 창의적인 한국인 육성'에서 볼 수 있듯이, 새로운 교육과정에서는 학생들의 창의력을 신장시키기 위한 방안으로 교과별 교육과정이나 재량활동 운영 등을 제시한 바 있다. 수학교육에서도 이러한 시대적 흐름에 발맞추어 수학적 창의력의 신장이 강조되고 있는 상황이다. 그동안 이론적인 측면과 실제적인 측면에서 수학적 창의성에 대한 성과가 축적되었다. 이론적인 측면에서 볼 때, Haylock(1987)등에 의해 창의력과 수학적 창의력의 구분되었으며, 특히 '수학적' 창의력에 대한 다양한 정의가 제안되었다. 실제적인 측면에서도 수학적 창의력을 측정하려는 평가 도구들이 그 동안 여러 가지로 개발하였다. 그러나, 이러한 수학적 창의력에 관한 전반적인 연구는 종국적으로 교실 수학수업에 반영되어야 함에도 불구하고, 그리 만족스럽지 못한 상황이다. 특히, 교실에서 수학수업을 실제로 담당하는 교사들이 수학적 창의력을 위한 수업을 하고자 하더라도 당장 가까이에서 구할 수 있는 교수 학습 자료가 여전히 부족한 상황이다. 물론 그 동안 교실 수학수업에서 사용할 수 있는 창의력 개발 프로그램이 전무한 것은 아니다. 그런데 그들 대부분은 게임이나 퍼즐을 이용한 것으로 그 수준이 단순 흥미유발에 그치고 있거나 소수의 영재아를 위한 소재를 중심으로, 특히 수학적 사고 과정을 따르기보다는, 시행착오를 거쳐 원하는 결과를 얻을 가능성이 많으며, 수학과의 연계성이 불분명한 채로 단순놀이에 그치는 경우가 적지 않아, 수업과 연관되어 창의력의 신장이라는 측면에서 볼 때, 적용하기 어려운 사례가 많다. 이러한 상황을 개선하는 데 기여하고자, 현재 교과교육공동연구 지원사업의 하나로 한국 학술 진흥재단의 지원을 받아, '개방형 문제(open-ended problems)'를 중심 소재로 한 '수학적 창의성'을 신장하기 위한 교수학습 프로그램을 개발하여, 중학교 1학년을 대상으로 연구를 진행하고 있다. 개방형 문제라 함은 명백한 정의가 어렵지만 Pehkeon(1995)는 개방형문제의 정의를 명백히 하기위한 시도로서 그 반대로 닫힌 문제에 대한 정의로부터 시작하여, 어떤 문제가 닫혀있다고 하는 것은 그 문제의 출발 상황과 목표 상황이 닫혀 있는 것, 즉 명백히 설명되어있을 때라면 개방형 문제는 이와 반대의 개념임을 시사하였다. Silver(1995)는 개방형 문제를 문제 자체가 다른 해석이 가능하거나 서로 다를 인정할만한 답을 가질 수 있는 문제 또는 풀이과정이 다양한 문제, 자연스럽게 다른 문제들을 제안하거나 일반화를 제시할 수 있는 문제라고 정의하였다. 따라서 개방형 문제란 출발상황이나 목표 상황의 일부가 닫혀있지 않을 때를 말하고 문제의 조건을 만족하는 해답이 여러 가지로 존재하는 문제를 뜻한다. 수학적 창의력을 개발하는 데, 다른 문제 유형보다도, 개방형 문제가 유리하다는 점은 이미 여러 학자들에 의해 주장되어왔다. 미국 국립영재교육센터(NRCG/T)는 기존의 사지선다형이나 단답형 문제와 질문들은 학생들의 사고 능력에 관한 정보를 거의 알려주지 못하기 때문에 한 가지 이상의 답을 요구하는 ‘open-ended' 또는 ’open-response' 문제와 질문을 가지고 수학 분야에서의 창의적 사고 능력과 표현능력을 측정해야 한다고 하였고, 개방형 문제가 일반적으로 정답이 하나인 문제보다 고차원적인 사고를 요구하게 하는 문제 형태라고 하였다. 본 연구에서는 이러한 근거를 바탕으로 개방형 문제의 유형을 다양한 답이 존재하는 문제, 다양한 해결 전략이 가능한 문제, 답이 없는 문제, 문제 만들기, 일반화가 가능한 문제 등으로 보고, 수학적 창의성 중 특히 확산적 사고에 초점을 맞추어 개방형 문제가 확산적 사고의 요소인 유창성, 독창성, 유연성 등에 각각 어떤 영향을 미치는지 20주의 프로그램을 개발, 진행하여 그 효과를 검증하고자 한다. 개방형 문제를 활용한 수학적 창의력 신장 프로그램을 개발하고 현장 학교에 실험 적용하여 그 효과를 분석하고자 하는 본 연구는 창의력 신장에 비중을 두는 수학과 교수-학습 과정에 실제적인 교수 학습 자료를 제공하는 것뿐만 아니라 교사들에게는 수학교실에서 사용 가능한 실제적인 활용방안을, 학생들에게는 주어진 문제를 여러 가지 각도에서 생각하면서 다양한 사고를 경험하는 기회를 가질 수 있어, 수학을 보는 학생들의 태도에도 긍정적인 변화를 가져올 수 있을 것이라 기대한다.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.1
• /
• pp.11-21
• /
• 2014

The purpose of this study was to furnish basic information for forest community ecology and to accumulate vegetational datum related to hierarchy of forest community for the efficient management of forest vegetation in Mt. Mani. Samples were collected and analyzed by 32 releves from August to October in 2010 using phytosociological analysis methodology of Z-M school and importance value analysis. The results were summarized that the forest vegetation was classified into 5 units in total. Importance value at vegetation unit 1 indicated Pinus densiflora 54.31 (18.10%), Quercus mongolica 39.21 (13.07%), Carpinus coreana 37.29 (12.43%), at vegetation unit 2 Quercus mongolica 89.43 (22.23%), Rhododendron mucronulatum 57.75 (14.43%), Carpinus coreana 47.19(11.80%), at vegetation unit 3 Styrax japonica 53.97 (13.50%), Acer mono 33.60 (8.40%), Carpinus coreana 26.48 (6.62%), Quercus serrata 22.51 (5.64%), at vegetation unit 4 Carpinus coreana 47.70 (11.92%), Quercus acutissima 38.40 (9.60%) and at vegetation unit 5 Evodia daniellii 80.59 (20.14%), Robinia pseudoacacia 35.00 (8.74%), Pueraria thunbergiana 28.63 (7.15%), Quercus dentata 28.20 (7.05%) in the order, respectively.

• Applied Microscopy
• /
• v.36 no.1
• /
• pp.35-45
• /
• 2006

Plants of Vitex negundo are known to develop numerous trichomes throughout their body, where certain trichome types have been believed to be one of the plausible structures for the unique scents. In the current study. structural aspects of the trichomes have been examined in leaves and stems of Vitex negundo using TEM and SEM. Trichome types as well as structural changes that occurred in certain trichomes during secretion have been mainly focused. Three type of glandular trichomes and two types of non-glandular trichomes were developed in the epidermis of young and mature Vitex negundo plants. The glandular trichomes included the peltate type (Type 1), the capitate type (Type 2), and degraded capitate type (Type 3), whereas the non-glandular warty trichomes contained the multicellular (Types 4) and unicellular type (Type 5). Type 1 and 2 consisted of head and stalk cells, but their number and size were different. One secretory cavity was formed from the four head cells in the former, but only two head cells were involved in the latter. The cytoplasmic density in the head cell was quite high and in particular, sER and Golgi bodies were well developed. At initiation of their development, the cuticle layer of the head cells separated from the outer tangential wall to form a secretory cavity. Subsequently the cavity expanded acropetally and a large number of secretory vesicles continuously produced from the head cells until they filled the entire cavity. The cavity contained materials that would be soon discharged into intercellular spaces and/or into the air. The cavity began to decrease the volume by contracting at initial secretion but degrade rapidly within short time. It has been suggested that the mode of secretion in V. negundo is probably the eccrine secretion, since no break or rupture of the cavity has been observed during examination. Contrastingly Type 3 exhibited deterioration of the head cell at early stage. Type 4 was about $110{\sim}190{\mu}m$ long, consisting of $2{\sim}3$ cells, and distributed more in the adaxial epidermis compared to the abaxial surface. However, $20{\sim}30{\mu}m$ long Type 5 was extremely dense in both epidermis. Among several trichome types, Type 1 and 2 probably play an important role in discharging unique aromatic scents in plants of V. negundo.

• Korean Journal of Poultry Science
• /
• v.29 no.2
• /
• pp.95-100
• /
• 2002

Two experiments were conducted to investigate the effect of taurine supplementation on lipid metabolism in laying hens. In experiment 1, 19-wk-old laying hens were given one of four taurine supplemented diets (0 (control), 0.4, 0.8, and 1.2% taurine) fur 10 weeks. Abdominal fat weight was lower in the 1.2% diet by 29.2% compared to the control. Serum concentrations of triacylglycerol and HDL-cholesterol were not different among the treatments. However, seam concentration of total cholesterol was higher by 22.4% in the 1.2% diet compared to the control. Concentration of triacylglycerol or total cholesterol in the liver were decreased by 26.1% or 26.4% and 28.2% or 26.4%, respectively in the 0.8% and 1.2% diets compared to the control. The concentration of HDL-cholesterol in liver was also lower by 33.9% in the 1.2% diet compared to the control. In experiment 2, 81-wk-old laying hens were allocated to one of three taurine supplemented diets (0 (control), 1 and 2% taurine) fur 6 weeks. Abdominal fat weight was lower by 25% in 1% taurine supplementation compared to the control. Serum concentrations of triacylglycerol, total cholesterol and HDL-cholesterol of hens fed with 1% diet were not different from those of control group. However, sew concentrations of triacylglycerol and total cholesterol were lower by 44.0% and 19.8%, respectively in the 2% diet compared to the control. Furthermore, serum concentration of HDL -cholesterol in the 2% diet was higher by 75% compared to the control. Concentrations of triacylglycerol and total cholesterol in the liver in the 2% diet were decreased in the 1% diet by 36.8 and 23%, respectively, but increased by 78.4% and 70%, respectively, compared to the control. The concentration of HDL-cholesterol in the liver was not different between the 1% diet and the control, but higher by 62.8% in the 2% diet compared to the control. These results indicated that taurine supplementation decreased the fat storage in abdominal cavity, which was accompanied by the changes in triacylglycerol and cholesterol metabolisms of laying hens.

• Childhood Kidney Diseases
• /
• v.9 no.1
• /
• pp.64-68
• /
• 2005

Purpose : Renal abscess is very rare in children and its diagnosis is difficult because symptoms are often nonspecific. In previous studies, on]y 15% to 25% of patients were reported to be diagnosed at the time of admission. Early diagnosis and treatment are important be cause mortality rate correlates positively with the time of diagnosis. The purpose of this study is to clarify the clinical features of children with renal abscess and to investigate the possible indicators of this disease for early diagnosis and Proper treatment. Methods : Twelve children diagnosed with renal abscess from Jan. 1996 to Jul. 2004 were included. The age of patients ranged from S months to 15 years. We retrospectively analyzed the demographics of patients, their symptoms, predisposing factors, diagnostic methods and causative organisms and the treatment modalities. Results : Fever was the most common manifestation, Five children(42%) had vesicoureteral reflux. Renal ultrasonography and computerized tornography were the most frequently used imaging tools to detect renal abscess. Gram negative bacteria were isolated in 7 patients and Staphylococcus aureus grew in 2 patients. All patients received intravenous antibiotics and 4 patients underwent aspiration or drainage of renal abscess. The average admission duration was 30 days. Conclusion : Renal abscess should be included in the differential diagnosis of prolonged fever in children, especially when flank pain is combined. For early diagnosis and a better prognosis, patients should be promptly investigated with ultrasonography or computerized tomography.

• Journal of Wetlands Research
• /
• v.23 no.4
• /
• pp.287-295
• /
• 2021

As facilities such as dam reservoir wetlands and agricultural irrigation reservoir wetlands are built, sedimentation occurs over time through erosion, sedimentation transport, and sediment deposition. Sedimentation issues are very important for the maintenance of reservoir wetlands because long-term sedimentation of sediments affects flood and drought control functions. However, research on resignation has been estimated mainly by empirical formulas due to the lack of available data. The purpose of this study was to calculate and compare the sediment deposition rate by developing a multiple regression model along with actual data and empirical formulas. In addition, it was attempted to identify potential causes of collapse by applying it to 64 reservoir wetlands that suffered flood damage due to the long rainy season in 2020 due to reservoir wetland sedimentation and aging. For the target reservoir, 10 locations including the GaGog reservoir located in Miryang city, Gyeongsangnam province in South Korea, where there is actual survey information, were selected. A multiple regression model was developed in consideration of physical and climatic characteristics, and a total of four empirical formulas and sediment deposition rate were calculated. Using this, the error of the sediment deposition rate was compared. As a result of calculating the sediment deposition rate using the multiple regression model, the error was the lowest from 0.21(m³km²/yr) to 2.13(m³km²/yr). Therefore, based on the sediment deposition rate estimated by the multi-regression model, the change in the available capacity of reservoir wetlands was analyzed, and the effective storage capacity was found to have decreased from 0.21(%) to 16.56(%). In addition, the sediment deposition rate of the reservoir where the overflow damage occurred was relatively higher than that of the reservoir where the piping damage occurred. In other words, accumulating sediment deposition rate at the bottom of the reservoir would result in a lack of acceptable effective water capacity and reduced reservoir flood and drought control capabilities, resulting in reservoir collapse damage.

• Korean Journal of Child Education & Care
• /
• v.19 no.2
• /
• pp.177-196
• /
• 2019

Objective: This study aims to analyze research trends related to software education for young children, focusing on studies published in Korea from 2016 to 2019 March. Methods: A total of 26 research publications on software education for young children, searched from Korea Citation Index and Research Information Sharing Service were identified for the analysis. The trend in these publications was classified and examined respectively by publication dates, types of publications, and the fields of study. To investigate a means of research, the analysis included key topics, types of research methods, and characteristics of the study variables. Results: The results of the analysis show that the number of publications on the topic of software education for young children has increased over the three years, of which most were published as a scholarly journal article. Among the 26 research studies analyzed, 16 (61.5%) are related to the field of early childhood education or child studies. Key topics and target subjects of the most research include the curriculum development of software education for young children or the effectiveness of software education on 4- and 5-year-old children. Most of the analyzed studies are experimental research designs or in the form of literature reviews. The most frequently studied research variable is young children's cognitive characteristics. For the studies that employ educational programs, the use of a physical computing environment is prevalent, and the most frequently used robot as a programming tool is "Albert". The duration of the program implementation varies, ranging from 5 weeks to 48 weeks. In the analyzed research studies, computational thinking is conceptualized as a problem-solving skill that can be improved by software education, and assessed by individual instruments measuring sub-factors of computational thinking. Conclusion/Implications: The present study reveals that, although the number of research publications in software education for young children has increased, the overall sufficiency of the accumulated research data and a variety of research methods are still lacking. An increased interest in software education for young children and more research activities in this area are needed to develop and implement developmentally appropriate software education programs in early childhood settings.

• Korean Journal of Poultry Science
• /
• v.45 no.4
• /
• pp.253-260
• /
• 2018

The hepatocyte nuclear factor 4 alpha ($HNF4{\alpha}$) gene is related to lipid transport, including abdominal fat and growth, in chickens. Interestingly, the A543G SNP within the $HNF4{\alpha}$ gene has previously been reported to be associated with body weight in both broilers and Korean native chickens (KNCs). However, its exact position within the HNF4 is not yet reported. This study aimed to identify the position of the A543G SNP and to identify additional SNPs that can be used as genetic markers in KNCs. A total of 128 KNCs were used for the sequencing and analysis of these genetic associations. As a result, A543G SNP was located in intron 4 of the $HNF4{\alpha}$ gene; it is reported as rs731246957 in the NCBI database. Fourteen SNPs were detected in the sequenced portion of the $HNF4{\alpha}$ gene; three of these, rs731246957, rs736159604 and new SNP, intron 6 (249), were significantly related with growth in the chickens. In this study, the TT genotype of rs731246957, previously reported as A543G SNP, the GG genotype of rs736159604 and GT of new SNP have are highly associated with body weight from birth to 40 weeks of age in KNCs (P<0.01). These results suggest that rs736159604, rs731246957 and intron 6 (249) SNPs within the $HNF4{\alpha}$ gene could function as growth-related markers in the selective breeding of KNCs.

• Korean Journal of Heritage: History & Science
• /
• v.48 no.2
• /
• pp.142-157
• /
• 2015

This study examines how traditional knowledge functions in the specific techniques to make pottery in terms of the traditional knowledge on the pottery techniques of Onggi potters. It focuses on how traditional pottery manufacturing skills are categorized and what aspects are observed with regard to the techniques. The pottery manufacturing process is divided into the preparation step of raw material, the molding step of pottery, and the final plasticity step. Each step involves unique traditional knowledge. The preparation step mainly comprises the knowledge on different kinds of mud. The knowledge is about the colors and properties of mud, the information on the regional distribution of quality mud, and the techniques to optimize mud for pottery manufacturing. The molding step mainly involves the structure and shape of spinning wheels, the techniques to accumulate mud, ways to use different kinds of tools, the techniques to dry processed pottery. The plasticity step involves the knowledge on kilns and the scheme to build kilns, the skills to stack pottery inside of the kilns, the knowledge on firewood and efficient ways of wood burning, the discrimination of different kinds of fire and the techniques to stoke the kilns. These different kinds of knowledge may be roughly divided into three categories : the preparation of raw material, molding, and plasticity. They are closely connected with one another, which is because it becomes difficult to manufacture quality pottery even with only one incorrect factor. The contents of knowledge involved in the manufacturing process of pottery focused are mainly about raw material, color, shape, distribution aspect, fusion point, durability, physical property, etc, which are all about science. They are rather obtained through the experimental learning process of apprenticeship, not through the official education. It is not easy to categorize the knowledge involved. Most of the knowledge can be understood in the category of ethnoscience. In terms of the UNESCO world heritage of intangible cultural assets, the knowledge is mainly about 'the knowledge on nature and universe'. Unique knowledge and skills are, however, identified in the molding step. They can be referred to 'body techniques', which unify the physical stance of potters, tools they employ, and the conceived pottery. Potters themselves find it difficult to articulate the knowledge. In case stated, it cannot be easily understood without the experience and knowledge on the field. From the preparation of raw material to the complete products, the techniques and traditional knowledge involved in the process of manufacturing pottery are closely connected, employing numerous categories and levels. Such an aspect can be referred to as a 'techniques chain'. Here the techniques mean not only the scientific techniques but also, in addition to the skills, the knowledge of various techniques and levels including habitual, unconscious behaviors of potters.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.16 no.3
• /
• pp.13-29
• /
• 2021

The purpose of this study was to analyze the spatial distribution and location factors of startups by generation (young and middle-aged) in Seoul. To this end, a research model was established that included factors of industry, population, and startup institutions by generation in 424 administrative districts using the Seoul Business Enterprise Survey(2018), which includes data on the age group of entrepreneurs. As an analysis method, descriptive statistics were conducted to confirm the frequency, average and standard deviation of startups by generation and major variables in the administrative districts of Seoul, and spatial distribution and characteristics of startups by generation were analyzed through global and local spatial autocorrelation analysis. In particular, the spatial distribution of startups in Seoul was confirmed in-depth by categorizing and analyzing startups by major industries. Afterwards, an appropriate spatial regression analysis model was selected through the Lagrange test, and based on this, the location factors affecting startups by generation were analyzed. The main results derived from the research results are as follows. First, there was a significant difference in the spatial distribution of young and middle-aged startups. The young people started to startups in the belt-shaped area that connects Seocho·Gangnam-Yongsan-Mapo-Gangseo, while middle-aged people were relatively active in the southeastern region represented by Seocho, Gangnam, Songpa, and Gangdong. Second, startups by generation in Seoul showed various spatial distributions according to the type of business. In the knowledge high-tech industries(ICT, professional services) in common, Seocho, Gangnam, Mapo, Guro, and Geumcheon were the centers, and the manufacturing industry was focused on existing clusters. On the other hand, in the case of the life service industry, young people were active in startups near universities and cultural centers, while middle-aged people were concentrated on new towns. Third, there was a difference in factors that influenced the startup location of each generation in Seoul. For young people, high-tech industries, universities, cultural capital, and densely populated areas were significant factors for startup, and for middle-aged people, professional service areas, low average age, and the level of concentration of start-up support institutions had a significant influence on startup. Also, these location factors had different influences for each industry. The implications suggested through the study are as follows. First, it is necessary to support systematic startups considering the characteristics of each region, industry, and generation in Seoul. As there are significant differences in startup regions and industries by generation, it is necessary to strengthen a customized startup support system that takes into account these regional and industrial characteristics. Second, in terms of research methods, a follow-up study is needed that comprehensively considers culture and finance at the large districts(Gu) level through data accumulation.