• Korean Journal of Environment and Ecology
• /
• v.36 no.2
• /
• pp.177-201
• /
• 2022

Following the adoption of the global plant conservation strategies at the Conference of the Parties for Biodiversity Conservation, diligent actions to achieve each targets are actively carried out. In particular, the need for ecological conservation research to achieve targets 2 and 7 of GSPC-2020 has increased. The priority taxa to accomplish the objectives of GSPC-2020 are rare and endemic plants. In particular, endemic plants with limited distribution in specific regions are evaluated to face a high risk of extinction. To address the necessity to preserve endemic plants, we investigated the distribution of Prunus choreiana H. T. Im, a Korean endemic plant. After that, we examined the vegetational environment of the habitat of P. choreiana and evaluated its population structure. The productivity of its fruits and the effects of pollinators on fruit production were evaluated as well. The fruiting ratio was calculated based on the number of flowers produced. Lastly, we observed the annual growth characteristics of P. choreiana. The habitats of P. choreiana did not show a specific type of vegetation. All of them were located in a limestone area of Gangwon-do in the central Korean Peninsula and occupied a site where the coverage of the tree layer and the sub-tree layer was not high or did not exist. The population structure of P. choreiana contained a high proportion of mature plants capable of producing fruits and a low proportion of seedlings and Juvenile plants. We found that the production of fruits required pollinators and was affected by the performance of each plant. Although P. choreiana produces many flowers, only a maximum of 20% and only 2-6% on average bear fruits. These flowering characteristics may be due to pollinators' low abundance and activity during the flowering season (between mid-March and early April), suggesting that many flowers are needed to attract more pollinators. We rarely observed the re-establishment of seedlings in the population of P. choreiana. Despite that, we predict the population to persist owing to its long lifespan and periodic production of numerous fruits. However, if the tree layer and sub-tree layer in competing status with P. choreiana increase their crown density, they are expected to inhibit the growth of P. choreiana and affect the risk of its extinction. Therefore, the current changes in the vegetational environment of the habitats are expected to decrease the number and extent of P. choreiana in the long term. The results of this study may serve as primary and important data necessary for the achievement of GSPC-2020 objectives.

• Journal of Food Hygiene and Safety
• /
• v.36 no.6
• /
• pp.481-487
• /
• 2021

The purpose of this study was to provide safety management information by analyzing the survival and growth-related properties of foodborne pathogens from Romaine lettuce. After cultivating E. coli O157:H7 for 72 h on Romain lettuce via spray inoculation, the bacteria population increased by 2.0 log CFU/g from the initial population, confirming the possibility of survival and multiplication of the pathogen thereon. The study also revealed that there is no significant difference in the cultivation of E.coli O157:H7 after 72 h from inoculation on damaged and undamaged lettuce leaves. As a result of investigating distribution of E.coli O157:H7 on damaged lettuce leaves, it was found that the bacteria is unlikely to adhere on the smooth surface of undamaged leaves and, thus, results in a low population density, whereas the bacteria cluster on the rough surface of damaged leaves and easily enter through the damaged tissues. Furthermore, after 24 h of cultivation of the pathogenic microbe in the extract with concentrations of 10-100%, utilization of the lettuce extract by the pathogen was found to be 8.9 log CFU/mL E. coli O157:H7, 8.6 log CFU/mL L. monocytogenes, and 8.8 log CFU/mL P. carotovorum. The increase in the population of both the pathogenic microbe and foodborne pathogen reached over 4 log CFU/mL, implying the microbe can utilize the lettuce extract as a source of nutrition. Compared to the initial inoculation concentration in 0.1% lettuce extract, the final concentration has increased up to 2.7 log CFU/mL E. coli O157:H7, 1.3 log CFU/mL L. monocytogenes, and 2.9 log CFU/mL P. carotovorum. Accordingly, the study confirms that the minimal growth concentration of the pathogenic microbe is lower than 0.1% and that the pathogen possibly survive and multiply inside the lettuce leaves given the lettuce extract with concentration of 0.1% is consistently supplied through the damaged tissues.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.2
• /
• pp.1-7
• /
• 2022

The purpose of this study is to discuss the impact of unmanned aerial vehicle service and how to activate it. The discussion on the impact of the introduction of the unmanned aerial vehicle service was examined in terms of economic, environmental, and social acceptance, and a plan to revitalize the industry was presented. In terms of economic impact, if transportation services are increased using unmanned aerial vehicles in the future, road-based transportation cargo may decrease and road movement speed may increase due to reduced road congestion. This can have a positive effect on the increase in the value of land or real estate assets, and it also provides an impact on smart city design. In terms of environmental impact, unmanned aerial vehicles (UAVs) generally move through electricity, so they emit less exhaust gas compared to other existing devices, such as vehicles and railroads, and thus have less environmental impact. However, noise can have a negative impact on the habitat in the presence of wild animals along their migration routes. In terms of social acceptability of unmanned aerial vehicles (UAV) technology, areas that are declining due to the emergence of new services may appear, and at the same time, organizations that create profits may appear, causing conflicts between industries. Therefore, it is essential to form a social consensus on the acceptance of emerging industries. The government should come up with various countermeasures to minimize the negative impact that reflects the characteristics of the unmanned aerial vehicle use service. Just as various systems such as road signs were introduced so that vehicles can be operated on the ground to secure air routes in the mid- to long-term for revitalization of unmanned-based industries, development and establishment of services that should be introduced and applied prior to constructing air routes I need this. In addition, the design and implementation of information collection and operation plans for unmanned air traffic management in Korea and a plan to secure a control system for each region should also be made. This study can contribute to providing ideas for mid- to long-term research on new areas with the development of the unmanned aerial vehicle industry.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.4
• /
• pp.527-536
• /
• 2022

The purpose of this study is to predict changing traffic environments and related economic effects by reflecting the changed KTDB and socio-economic indicators pertaining to Mulgeum station, a general railway stop, when it is confirmed as a KTX stop. To analyze the data of this study, socioeconomic indicators and the general status of transportation facility operations were investigated with reference to related statistical data, centered on the country overall and on Yangsan city in particular. In addition, we investigated and referenced the railroad facility construction plan and train operation plan, which are national high-level plans related to land development and transportation network construction. Currently, there are only ITX trains (4 times/day) and Mugunghwa trains (29 times/day) that stop at Mulgeum station in Yangsan, meaning that passengers cannot use KTX trains in the Yangsan area. In particular, the need for a KTX stop at Mulgeum station has been continuously raised because train users in the Yangsan area have inconvenient transportation in that they must travel 40 minutes to Ulsan station or 30 minutes to Gupo station to use the KTX. As a result of analyzing railroad transportation demand that will change in the future as the KTX stop at Mulgeum station is confirmed, the number of passengers boarding and arriving at Mulgeum station is predicted to be 1,674 passengers/day by 2025. In addition, the numbers of train passengers that are converted from Ulsan and Gupo stations due to the stop at Mulgeum station are predicted to be 594 passengers/day boarding and 562 passengers/day arriving by 2025. In the future, if Yangsan citizens use the KTX Mulgeum station, the access time to Mulgeum station can be shortened to 22 minutes from 65 minutes, and it is predicted that the inconvenience of transferring between railroads will be resolved, with the waiting time for transfers reduced by up to a maximum of 40 minutes. Therefore, the economic effect of creating a KTX stop at Mulgeum station was analyzed to be B/C=1.823 when general railroad operating costs are not taken into account and B/C=2.127 when general railroad operating costs are considered. In conclusion, when using KTX trains to visit the Seoul Metropolitan Area, it takes 2 hours and 43 minutes to use Mulgeum station without using Ulsan station or Gupo station, which is considered to be very effective for reducing travel times and improving the economic feasibility of this development; it is also expected that Yangsan city will be able to improve accessibility and mobility to the Seoul Metropolitan Area by breaking free from the disgrace of being a remote location given its link to KTX in the future.

• Journal of Navigation and Port Research
• /
• v.46 no.3
• /
• pp.179-190
• /
• 2022

In this study, we investigated the characteristic impedance and bandwidth of CPW3DCS (coplanar waveguide employing periodic 3D coupling structures), and examined its potential for the development of a marine radio communication FISoC (fully-integrated system on chip) semiconductor device. To extract bandwidth and characteristic impedance of the CPW3DC, we induced a measurement-based equation reflecting measured insertion loss, and compared the measured results of the propagation constant β and characteristic impedance with the measured ones. According to the results of the comparison, the calculated results show a good agreement with the measured ones. Concretely, the propagation constant β and characteristic impedance exhibited an maximum error of 3.9% and 6.4%, respectively. According to the results of this study, in a range of LT = 30 ~ 150 ㎛ for the length of periodic structures, the CPW3DC exhibited a passband characteristic of 121 GHz, and a very small dependency of characteristic impedance on frequency. We could realize a low impedance transmission line with a characteristic impedance lower than 20 Ω by using CPW3DCS with a line width of 20 ㎛, which was highly reduced, compared with a 3mm line width of conventional transmission line with the same impedance. The characteristic impedance was easily adjusted by changing LT. The above results indicate that the CPW3DC can be usefully used for the development of a wireless communication FISoC (fully-integrated system on chip) semiconductor device. This is the first report of a study on the bandwidth of the CPW3DC.

• Journal of The Korean Association For Science Education
• /
• v.42 no.3
• /
• pp.311-324
• /
• 2022

This study analyzed the types of scientific emoticons made by science-gifted elementary school students and their perceptions on making scientific emoticons. To do this, 71 students from 4th to 6th graders of two gifted science education center in Seoul were selected. Scientific emoticons made by the students were analyzed according to the number and types. Their perceptions on making scientific emoticons were also analyzed through a questionnaire and group interviews. In the analyses for types of text in the scientific emoticons, 'word type' and 'sentence type' were made more than 'question and answer type'. And the majority of students made more 'pun using pronunciation type' and 'mixed type' than other types. They also made more 'graphic type' and 'animation type' than 'text type' in the images of the scientific emoticons. In the analyses for the information of the scientific emoticons, 'positive emotion type' and 'negative emotion type' of scientific emoticons were made evenly. The students made more 'new creation type' than 'partial correction type' and 'entire reconstruction type'. They also used scientific knowledge that preceded the knowledge of science curriculum in their grade level. The scientific knowledge of chemistry was used more than physics, biology, earth science, and combination field. 'Name utilization type' was more than 'characteristic utilization type' and 'principle utilization type'. Students had various positive perceptions in making scientific emoticons such as 'increase of scientific knowledge', 'increase of various higher-order thinking abilities', 'ease of explanation, use, memory, and understanding of scientific knowledge', 'increase of fun, enjoyment, and interest about science and science learning', and 'increase of opportunity to express emotions'. They were also aware of some limitations related to 'difficulties in the process of making scientific emoticons', 'lack of time', and 'limit that it may end just for fun'. Educational implications of these findings are discussed.

• Korean Journal of Environment and Ecology
• /
• v.36 no.3
• /
• pp.257-276
• /
• 2022

Studies on rare and endemic plant conservation should be performed nationally to conserve plant diversity. Studies targeting a specific taxon have been reported based on the necessity of conserving plant diversity. From this point of view, there is an increasing necessity to compare and evaluate the studies for conservation. Moreover, it is necessary to analyze and review the direction for study subjects and items required for effective conservation of rare and endemic plants in Korea, based on the analysis results of collected data. We analyzed trends of studies on rare and endemic plants worldwide. In particular, we collected and analyzed the study trend in Korea. Study fields of the rare and endemic plants were divided into six classifications, of which the conservation ecology classification was sub-divided into the species traits, population study, and biological interaction. We have collected conservation ecology studies showing significant differences in regions and countries. They have been actively conducted in Europe and North America by region and in Japan and the United States by country. On the contrary, studies on basic ecology accounted for the most, followed by conservation genetics and restoration ecology in Korea. It was revealed that the portion of conservation ecology conducted in Korea was lower than that of the world. Moreover, studies mainly focused on a specific taxon of rare and endemic plants, such as endangered plants designated by the Korean Ministry of Environment. Particularly in Korea, conservation genetics and restoration ecology studies accounted for high percentages. Considering the worldwide study trends, particularly those in Europe and North America that lead the study of conservation ecology, we suggest approaches to increase the percentages of conservation ecology, including securing the information on species traits, population structure and population dynamics, and interaction between animals and plants are necessary for effective conservation of rare and endemic plants in Korea.

• Journal of The Korean Association For Science Education
• /
• v.42 no.3
• /
• pp.325-340
• /
• 2022

This study attempts to analyze the causes of low affective achievement of elementary, middle, and high school students in Korea in science. To this end, a total of 27 students, three to four students per grade, were interviewed by grade from the fourth grade of elementary school to the first grade of high school, and a total of nine teachers were interviewed by school level. In the interview, related questions were asked in five sub-areas of the 'Indicators of Positive Experiences about Science': 'Science Academic Emotion', 'Science-Related Self-Concept', 'Science Learning Motivation', 'Science-Related Career Aspiration', and 'Science-Related Attitude'. Interview contents were recorded, transcribed, and categorized. As a result of examining the causes of low science academic emotion, it was found that students experienced negative emotions when experiments are not carried out properly, scientific theories and terms are difficult, and recording the inquiry results is burdensome. In addition, students responded that science-related self-concept changed negatively due to poor science grades, difficult scientific terms, and a large amount of learning. The reasons for the decline in science learning motivation were the lack of awareness of relationship between science class content and daily life, difficulty in science class content, poor science grades, and lack of relevance to one's interest or career path. The main reason for the decline in science-related career aspirations was that they feel their career path was not related to science, and due to poor science performance. Science-related attitudes changed negatively due to difficulties in science classes or negative feelings about science classes, and high school students recognized the ambivalence of science on society. Based on the results of the interview, support for experiments and basic science education, improvement of elementary school supplementary textbook 'experiment & observation', development of teaching and learning materials, and provision of science-related career information were proposed.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.23 no.1
• /
• pp.89-104
• /
• 2021

Based on the TF-IDF weighted value that evaluates the importance of words that play a key role, the semantic network analysis(SNA) was conducted on the self-introduction letter of freshman at Korea National College of Agriculture and Fisheries(KNCAF) in 2020. The top three words calculated by TF-IDF weights were agriculture, mathematics, study (Q. 1), clubs, plants, friends (Q. 2), friends, clubs, opinions, (Q. 3), mushrooms, insects, and fathers (Q. 4). In the relationship between words, the words with high betweenness centrality are reason, high school, attending (Q. 1), garbage, high school, school (Q. 2), importance, misunderstanding, completion (Q.3), processing, feed, and farmhouse (Q. 4). The words with high degree centrality are high school, inquiry, grades (Q. 1), garbage, cleanup, class time (Q. 2), opinion, meetings, volunteer activities (Q.3), processing, space, and practice (Q. 4). The combination of words with high frequency of simultaneous appearances, that is, high correlation, appeared as 'certification - acquisition', 'problem - solution', 'science - life', and 'misunderstanding - concession'. In cluster analysis, the number of clusters obtained by the height of cluster dendrogram was 2(Q.1), 4(Q.2, 4) and 5(Q. 3). At this time, the cohesion in Cluster was high and the heterogeneity between Clusters was clearly shown.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.175-198
• /
• 2022

With the development of technology, the methods of digitally converting various forms of analog information have become common. As a result, the concept of recording, building, and reproducing data in a virtual space, such as digital heritage and digital reconstruction, has been actively used in the preservation and research of various cultural heritages. However, there are few existing research results that suggest optimal scanners for small and medium-sized relics. In addition, scanner prices are not cheap for researchers to use, so there are not many related studies. The 3D scanner specifications have a great influence on the quality of the 3D model. In particular, since the state of light reflected on the surface of the object varies depending on the type of light source used in the scanner, using a scanner suitable for the characteristics of the object is the way to increase the efficiency of the work. Therefore, this paper conducted a study on nine small and medium-sized buried cultural properties of various materials, including earthenware and porcelain, by period, to examine the differences in quality of the four types of 3D scanners. As a result of the study, optical scanners and small and medium-sized object scanners were the most suitable digital records of the small and medium-sized relics. Optical scanners are excellent in both mesh and texture but have the disadvantage of being very expensive and not portable. The handheld method had the advantage of excellent portability and speed. When considering the results compared to the price, the small and medium-sized object scanner was the best. It was the photo room measurement that was able to obtain the 3D model at the lowest cost. 3D scanning technology can be largely used to produce digital drawings of relics, restore and duplicate cultural properties, and build databases. This study is meaningful in that it contributed to the use of scanners most suitable for buried cultural properties by material and period for the active use of 3D scanning technology in cultural heritage.