• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.363-368
• /
• 2001

Because of rapid damping of light and electromagnetic wave, acoustic wave has been widely used for underwater communication. However, the propagation of the acoustic wave is highly dependent on the environment such as water properties(temperature, pressure, salinity), bottom and surface conditions, etc.. This paper deals with the surface reflection effect on the wave propagation in the underwater anechoic basin in KRISO. Both theortical and experimental approaches are performed and the results are compared.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.1
• /
• pp.1-7
• /
• 1998

SAR data can be achieved independently of weather conditions or sun illumination which is main limitation of electro-optical sensor to get image. The information from imagery can be more enlarged using Shh data be-cause SAR data offers different information from electro-optical sensor. SAR data contains various distortions caused by the radar specification and geometric properties of data acquisition. These distortions should be removed to get the information with acceptable accuracy. In this study, we aimed to correct the radiometric distortion in Shh image caused by the geometric property of the object. For this purpose, we simulated the SAR image by modelling of the power of return beam which is variable according to the geometric configuration between SAR antenna and ground object. Dividing the SAR image by the simulation image, then, we can get the radiometrically corrected image. As a result of this study, we could minimize the effect of radiometric distortion in achieving some qualitative information from SAR image for the related field, such as Geospatial Information System.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.06a
• /
• pp.119-120
• /
• 2007

센서 네트워크는 온도, 습도, 무게, 화학물질 밀도 등과 같이 공간적 시간적 상관관계가 있는 데이터를 실시간으로 수집하는 응용에 적용될 수 있다. 본 논문에서는 1차원과 2차원의 센서 네트워크에서 센서 노드의 작동 확률을 고려한 경우에 데이터 왜곡을 모델링하는 수식을 제시하고 데이터 왜곡을 최소화할 수 있는 최적의 노드 개수에 대한 새로운 계산 결과를 제시한다 계산 결과는 최적의 노드 개수는 패킷의 hop 지연과 관련이 있다는 것을 보여주었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04b
• /
• pp.487-489
• /
• 2001

제본된 책이나 고문서를 디자타이즈할 때 책을 바르게 펴지 못하거나 지정된 위치나 방위로 위치시키지 못해서 문제가 발생한다. 특히 힘을 가할 수 없는 고문서의 경우에는 바르게 펼수가 없기 때문에 깊이 차이에 의한 문서의 왜곡이 발생한다. 본 연구에서는 Structured Light을 이용하여 깊이 차에 의한 문자의 왜곡을 복원하는 방안을 제안한다. 또한 입력시 책의 위치와 방위에 대한 제한을 완화시킬 수 있도록 책의 위치와 방위 변화에 적을 알 수 있는 방안을 제안한다,

• The Journal of the Acoustical Society of Korea
• /
• v.29 no.4
• /
• pp.286-293
• /
• 2010

There are two major conventional quantization algorithms: resolution-constrained quantization (RCQ) and entropy-constrained quantization (ECQ). Although RCQ works well for fixed transmission-rate, it produces the distortion outliers since the cell sizes are different. Compared with RCQ, ECQ has the constraints on the cell size but it produces the rate outliers. We propose the cell-size constrained vector quantization (CCVQ) that improves the generalized Lloyd algorithm (GLA). The CCVQ algorithm is able to make a soft-decision between RCQ and ECQ by using the flexible penalty measure according to the cell size. Although the proposed method increases the small amount of overall mean-distortion, it can reduce the distortion outliers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.673-676
• /
• 2015

Digital Pre-Distortion (DPD) is a linearization technique for nonlinear power amplifiers (PAs) by implementing inverse function of the PA at baseband digital stage. To obtain proper DPD parameters, a feedback path is required to convert the PA output to a baseband signal, and a memory is also needed to store the feedback signals. DPD parameters are usually found by an adaptive algorithm from the feedback samples. However, for the adaptive algorithm to converge to a reliable solution, long feedback samples are required, which increases convergence time and hardware complexity. In this paper, we propose a DPD technique that requires relatively short feedback samples. From the observation that the convergence time of the adaptive algorithm highly depends on the initial condition, this paper iteratively utilizes the feedback samples while keeping and using the converged DPD parameters at the former iteration as the initial condition at the current iteration. Computer simulation results show that the proposed method performs better than the conventional technique while the former requires much shorter feedback samples than the latter.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1684-1690
• /
• 2018

A new digital pre-distortion (DPD) technique for closely spaced dual-band signals is proposed. In the system under consideration, dual-band signals are amplified by a single broadband power amplifier (PA) at a transmitter. The PA output is distorted by cross-modulation between the two bands as well as their own inter-modulation distortion. Especially, if the two bands are placed in close proximity to each other, their spectral regrowths due to in-band intermodulation overlap with each other, which degrades DPD performance. To solve this problem, we propose a new DPD technique where the dual-band PA characteristics are estimated first, and then the DPD parameters are obtained from the estimated PA characteristics. By finding the DPD parameters through two steps, pre-distortion can perform well for the closely-spaced dual band signals. The proposed technique is verified through computer simulation. Simulation result shows that the proposed method performs better than the conventional method for closely-spaced dual band signals.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.3
• /
• pp.7-15
• /
• 1998

In this paper a calibration method is proposed for calibrating distorted image from lens and various factors. The similar origin image can be generated by the proposed method that calculate a calibration coefficient by modeling third transformation between standard image and distorted image and then apply the coefficient to distorted image The coefficient is effective until camera position is changed or lens is exchanged. This research consists of processes to calculate calibration coefficient and to set similar real image by the coefficient. Proposed method especially is applied to a system to obtain a real image from a distorted image causing effects of special system environment and camera lens The advantage of this method is verified by experiment using distorted images from a CCD camera that will attach atomic pile.

• Journal of Korean Society for Geospatial Information Science
• /
• v.19 no.4
• /
• pp.55-63
• /
• 2011

Having a wide angle of view, a fisheye lens is useful for obtaining images of the inside wall of a tunnel. A circular fisheye tunnel image can be transformed into a familiar rectangular image by applying the concept of cylindrical projection. This projection transformation causes several types of distortions in the projected image. This paper discusses the distortion on the boundary lines between smoothly curved wall and flat ground. We analyzed the cause of this boundary distortion, developed transformation model, and derived a correction formular. A distortion correction software programmed in Visual C++ applied to projected image. Consequently, boundary-corrected image could be obtained. Research into other distortions of projected image will helpful in obtaining tunnel image that resembles real tunnel from fisheye tunnel image.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2004.11a
• /
• pp.829-832
• /
• 2004

실제영상으로 가상환경을 구축해서 사용자가 가상환경을 돌아다님으로써 보다 큰 몰입감과 현실감을 제공하는 영상기반 가상현실 기술은 최근 들어 웹 기반 가상현실시스템을 구축하기 위해서 많이 사용된다. 이 기술은 가상환경 구축에 있어 항해를 쉽게 하기 위한 한 방법으로 넓은 시각 영역(field of view)을 얻을 수 있는 wide-angle 렌즈를 흔히 사용한다. 어안렌즈(fish-eye lens)는 전형적인 넓은 시각 영역을 가진 렌즈로서, 매우 큰 radial distortion 을 가진다. 왜곡을 없앤 영상을 얻기 위해 본 논문에서는 구면기하(spherical geometry) 및 사영기하(projective geometry)를 사용하여 어안영상을 보정하는 non-metric기법을 제안한다. 제안한 이 방법은, 기존의 방법들 보다는 쉽고 빠른 속도로 왜곡을 보정할 수 있으므로 어안영상의 왜곡을 보정하는 하드웨어를 효율적으로 구현할 수 있다. 그리고 spheroid 를 이용해 좀 더 왜곡을 정확히 보정방법과 별도의 서보 모터 없이 pan/title 를 가능케 하는 시점이동에 따른 왜곡 보정 방법을 제시한다.