• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.2
• /
• pp.33-40
• /
• 2019

Many companies have tried to develop wind power generators with a larger capacity, smaller size and lighter weight. High temperature superconducting (HTS) generators are more suitable for wind power systems because they can reduce volume and weight compared with conventional generators. However, the HTS generator has problems such as huge vacuum vessel and the difficulty of repairing the HTS field coils. These problems can be overcome through the modularization of the HTS field coil. The HTS module coil require a current leads (CLs) for deliver DC current, which causes a large heat transfer load. Therefore, CLs should be designed optimally for reducing the conduction and Joule heat loads. This paper deals with a structural design and thermal analysis of a module coil for a 750 kW-class HTS generator. The conduction and radiation heat loads of the module coils were analysed using a 3D finite element method program. As a result, the total thermal load was less than the cooling capacity of the cryo-cooler. The design results can be effectively utilized to develop a superconducting generator for wind power generation systems.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.672-682
• /
• 2020

The Korea Nowadays, which is research on digital twin technology for efficient operation in various industrial/manufacturing sites, is being actively conducted, and gradual depletion of fossil fuels and environmental pollution issues require new renewable/eco-friendly power generation methods, such as wave power plants. In wave power generation, however, which generates electricity from the energy of waves, it is very important to understand and predict the amount of power generation and operational efficiency factors, such as breakdown, because these are closely related by wave energy with high variability. Therefore, it is necessary to derive a meaningful correlation between highly volatile data, such as wave height data and sensor data in an oscillating water column (OWC) chamber. Secondly, the methodological study, which can predict the desired information, should be conducted by learning the prediction situation with the extracted data based on the derived correlation. This study designed a workflow-based training model using a machine learning framework to predict the pressure of the OWC. In addition, the validity of the pressure prediction analysis was verified through a verification and evaluation dataset using an IoT sensor data to enable smart operation and maintenance with the digital twin of the wave generation system.

• Journal of Information Technology and Architecture
• /
• v.11 no.1
• /
• pp.1-10
• /
• 2014

From 2004 to 2013, the annual investment for the ICT sector in Korea amounted to about 3.2 trillion won. Depending on whether the government policy allowed for budget increases and/or decreases, this impacted the investment in the ICT sector. In particular, the fixed costs of operation and maintenance lead to a reduced chance for a new potential demands in IT programs. Even though a situation may exist that there are insufficient funds available, there is a need for building a sustainable long-term IT investment management system. The purpose of this study is to conduct basic research for the arrangement of preparation to meet IT needs required in the public sector. For this, this paper introduces the concept of IT Investment Management based on prudent forecasting. After both foreign and domestic relevant cases are reviewed, implications will be derived from the aforementioned cases. Through this process, the direction of IT Investment Management based on forecasting for the IT projects decision making will be suggested. These research results could be used for helping to develop better policies and a more efficient management of the public sector IT budget.

• Journal of Advanced Navigation Technology
• /
• v.24 no.4
• /
• pp.273-279
• /
• 2020

In the Korea's SBAS(KASS), reference site is an important infrastructure facility for the collecting and monitoring GPS/GEO signals. The SBAS reference station has an clear requirements than other regular monitoring stations. It requires constant maintenance during the system operation. The development for KRS site should be prepared for site survey, site construction, antenna geodetic survey, equipment installation and operation. Site survey is initially performed as an important step to predict site availability and system performance. The operation center must provide the reference site, equipment room, and appurtenant to satisfy the site requirements. The position of antennas is very important information, and accuracy must be secured through the geodetic survey. Measurement collected at the from precise antenna are provided to the KASS processing station. The position of antenna should be maintained through continuous position checks and updates during the operation. When the development of the KRS site is completed, it performs tasks for installing and operating the KRS equipment. In this paper, we presented the procedures and some results for the development of the 7 KRS sites.

• The KIPS Transactions:PartD
• /
• v.10D no.7
• /
• pp.1149-1154
• /
• 2003

Due to various requirements for the user access control to large databases in the hospitals and the banks, database security has been emphasized. There are many security models for database systems using wide variety of policy-based access control methods. However, they are not functionally enough to meet the requirements for the complicated and various types of access control. In this paper, we propose a database security system that can individually control user access to data groups of various sites and is suitable for the situation where the user's access privilege to arbitrary data is changed frequently. Data group(s) in different sixes d is defined by the table name(s), attribute(s) and/or record key(s), and the access privilege is defined by security levels, roles and polices. The proposed system operates in two phases. The first phase is composed of a modified MAC (Mandatory Access Control) model and RBAC (Role-Based Access Control) model. A user can access any data that has lower or equal security levels, and that is accessible by the roles to which the user is assigned. All types of access mode are controlled in this phase. In the second phase, a modified DAC(Discretionary Access Control) model is applied to re-control the 'read' mode by filtering out the non-accessible data from the result obtained at the first phase. For this purpose, we also defined the user group s that can be characterized by security levels, roles or any partition of users. The policies represented in the form of Block(s, d, r) were also defined and used to control access to any data or data group(s) that is not permitted in 'read ' mode. With this proposed security system, more complicated 'read' access to various data sizes for individual users can be flexibly controlled, while other access mode can be controlled as usual. An implementation example for a database system that manages specimen and clinical information is presented.

• The KIPS Transactions:PartD
• /
• v.11D no.3
• /
• pp.671-682
• /
• 2004

As new and diverse information technologies are being introduced and software complexity is increased, software development cost and efforts are also sharply increased. Component-Based Development (CBD) technology is appealing as a new way to reduce the cost and effort by increasing reusability and maintainability. Component in CBD has variability infernally which enables customization of the component within the specific domain. A component user can easily set up internally variability parts though Required interface which is provided by the component. Enterprise JavaBeans (EJB) is utilized as a commercial standard to implement Java-based components. However, EJB constructs are limited in directly implementing Required interfaces of coarse-grained components［8］. In this paper, we define Required interface and propose interface-storage technique, class-storage technique, interface-generation technique, and Plug -in technique for implementing required interface of component. Interface-storage technique stores variable value in Required interface and class-storage technique take the Bean containg variability as Required interface without modification of component model. Interface-generation technique generates new Bean which takes the role of Required interface for component variability and Plug-in technique sets up component variability that component user plugged-in variable part externally The proposed four techniques conform to the semantics of CBD component interface and enable the implementation of high quality components.

• Journal of the Korean Society for Railway
• /
• v.20 no.4
• /
• pp.458-465
• /
• 2017

The railway signaling system, which controls the course of trains and the distance between trains, is a safety critical system of the railway system because derailment or collision of trains can occur if unsafe failure is generated by any fault. The international standards of reliability, availability, maintainability, and safety of railway applications require that the safety of functions be guaranteed in safety critical systems; system reliability and safety are quantitatively estimated and demonstrated by the failure rates of devices. The development of technology has accelerated the development of railway signaling systems. Existing devices, which have already been verified as to their safety, are applied with special user requirements to reflect the new operation scenario. It is found that the reliability and safety of the devices are different depending on individual application. Therefore, the reliability of the railway signaling system must be considered while complying with the international standards; this requires that the initial failure rate be estimated and demonstrated using fault data gathered over several years. This paper shows a method for demonstrating the initial estimated failure rate and suggests a fault data collection method and an overall process that is based on probability.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.4
• /
• pp.79-86
• /
• 2016

About 75% of software security incidents are caused by software vulnerability. In addition, the after-market repairing cost of the software is higher by more than 30 times than that in the design stage. In this background, the secure coding has been proposed as one of the ways to solve this kind of maintenance problems. Various institutions have addressed the weakness patterns of the standard software. A new Korean programming language Saesark has been proposed to resolve the security weakness on the language level. However, the previous study on Saesark can not resolve the security weakness caused by the API. This paper proposes a way to resolve the security weakness due to the API. It adopts a static analyzer inspecting dangerous methods. It classifies the dangerous methods of the API into two groups: the methods of using tainted data and those accepting in-flowing tainted data. It analyses the security weakness in four steps: searching for the dangerous methods, configuring a call graph, navigating a path between the method for in-flowing tainted data and that uses tainted data on the call graph, and reporting the security weakness detected. To measure the effectiveness of this method, two experiments have been performed on the new version of Saesark adopting the static analysis. The first experiment is the comparison of it with the previous version of Saesark according to the Java Secure Coding Guide. The second experiment is the comparison of the improved Saesark with FindBugs, a Java program vulnerability analysis tool. According to the result, the improved Saesark is 15% more safe than the previous version of Saesark and the F-measure of it 68%, which shows the improvement of 9% point compared to 59%, that of FindBugs.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.99-106
• /
• 2002

Researches on integration of design and construction information from earlier era focused on the conceptual data models. Development and prevalent use of commercial database management system led many researchers to design database schemas for enlightening of relationship between non-graphic data items. Although these researches became the foundation fur the proceeding researches. they did not utilize the graphic data providable from CAD system which is already widely used. 4D CAD concept suggests a way of integrating graphic data with schedule data. Although this integration provided a new possibility for integration, there exists a limitation in data dependency on a specific application. This research suggests a new approach on integration for design and construction information, 'Product Model Centered Integration Methodology'. This methodology achieves integration by preliminary research on existing methodology using 4D CAD concept. and by development and application of new integration methodology, 'Product Model Centered Integration Methodology'. 'Design Component' can be converted into digital format by object based CAD system. 'Unified Object-based Graphic Modeling' shows how to model graphic product model using CAD system. Possibility of reusing design information in latter stage depends on the ways of creating CAD model, so modeling guidelines and specifications are suggested. Then prototype system for integration management, and exchange are presented, using 'Product Frameworker', and 'Product Database' which also supports multiple-viewpoints. 'Product Data Model' is designed, and main data workflows are represented using 'Activity Diagram', one of UML diagrams. These can be used for writing programming codes and developing prototype in order to automatically create activity items in actual schedule management system. Through validation processes, 'Product Model Centered Integration Methodology' is suggested as the new approach for integration of design and construction information.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.2
• /
• pp.120-135
• /
• 2021

Changdeokgung Rear Garden is an important place to show the essence of the garden culture of the Joseon Dynasty. In the garden landscape experience, the restoration of the road completes the system of connecting the main spaces. Therefore, the restoration of the road requires accurate understanding of its creation, extinction, and maintenance. The purpose of this study was to detail the changes in the path that occurred in the Changdeokgung Palace Rear Garden from the late Joseon Dynasty to the modern and contemporary period by analyzing literature and drawing materials. For a time-series analysis, "Donggwoldo" and "Donggwoldohyeong" produced in the Joseon Dynasty, along with "Changdeokgung Plan Drawing" produced in modern and contemporary times, and aerial photographs were used. Drawings and photographs of different coordinate systems were transformed into one coordinate system in the geographic information system ArcGIS to compare changes in the movements of different periods. The results of the study are as follows. First, a total of 37 sections have been used since Japanese colonial era, of which 13 have been maintained, 14 have disappeared, and 10 have been newly established. Among the extinction sections, the road north of Neungheojeong Pavilion is considered to be an urgent place to connect the space to the garden and restore it to enjoy the scenery. In the new section, it seems necessary to establish a new alternative road or shorten the section for the connecting section between Daebodan and Okryucheon. Second, it was revealed that the biggest and most frequent changes to the road system in the garden were Japanese colonial era and renovations in the 1970s. It is worth noting the changes in the road since the 1970s, rather than Japanese colonial era, where it was difficult to manage the gardens independently. The access road to Okryucheon remained in its original shape until the 1990s, but it was renovated to its current shape due to misperception of the original shape. A project is needed to find out the cause of the change in this period and restore the damaged original shape. The biggest achievement of this study is that it revealed the changes in the garden path of Changdeokgung Palace in modern and contemporary times. The biggest achievement of this study is that it revealed the changes in the road of Changdeokgung Palace Rear Gardens in modern and contemporary times. However, there is a limitation that it has not been able to clearly present the location and shape that should be restored because it has not found data on landscaping plans or maintenance. In order to restore the road using the data revealed in this study, it seems necessary to consider realistic problems such as current space utilization, viewing system, disaster prevention and maintenance.