• Journal of The Korean Association For Science Education
• /
• v.42 no.4
• /
• pp.417-428
• /
• 2022

This study analyzed the frequency and level of scientific practices presented in secondary science textbooks. A total of 1,378 student activities presented in 14 middle school science textbooks and 5 high school integrated science textbooks were analyzed, using the definition and level of scientific practice suggested in the NGSS. Findings show that most student activities focus on three practices. Compared to the textbooks for the previous science curriculum, the practice of 'obtaining, evaluating, and communicating information' was more emphasized, reflecting societal changes due to ICT development. However, the practice of 'asking a question', which can be an important element of student-led science learning, was still rarely found in textbooks, and 'developing and using models', 'using math and computational thinking' and 'arguing based on evidence' were not addressed much. The practices were mostly elementary school level except for the practice of 'constructing explanations'. Such repeated exposures to a few and low level of practices mean that many future citizens would be led to a naïve understanding of science. The findings imply that it is necessary to emphasize various practices tailored to the level of students. In the upcoming revision of the science curriculum, it is necessary to provide the definition of practices that are not currently specified and the expected level of each practice so that the curriculum can provide sufficient guidance for textbook writing. These efforts should be supported by benchmarking of overseas science curriculum and research that explore students' ability and teachers' understanding of scientific practices.

• Journal of The Korean Association For Science Education
• /
• v.43 no.1
• /
• pp.17-28
• /
• 2023

In line with the entry into the digital-based intelligent information society, the science curriculum emphasizes the cultivation of scientific competencies, and computer-based test (CBT) is drawing attention for assessment of competencies. CBT has advantages to develop items that have high fidelity, and to establish a feedback system by accumulating results into the database. However, it is necessary to solve the problems of improving validity of assessment results, lowering measurement efficiency, and increasing management factors. To examine students' responses to the introduction of the new assessment tools in the process of transitioning from paper-based test (PBT) to CBT, in this study, we analyzed the results of the PBT and the CBT conducted in 2021 National Assessment of Educational Achievement (NAEA). In particular, we sought to find the effects on student achievement when only the mode of assessment was changed without change of items, and the effect on student achievement when the items were composed including technology enhanced features that take advantage of CBT. This study is derived through the analysis of the results of 7,137 third-grade middle school students taking one among the three kinds of assessments, which were the PBT or two kinds of CBT. After the assessment, the percentage of correct answers and the item discriminations were collected for each group, and expert opinions on characteristics of response were collected through the expert council involving 8 science teachers with experience in NAEA. According to the results, there was no significant difference between students' achievement results in the PBT and the CBT-M, which means simple mode conversion type of CBT, so it could be explained that the mode effect did not appear. However, it was confirmed that the percentage of correct answers for the construct response items was somewhat high in the CBT, and this result was analyzed to be related to the convenience of the response. On the other hand, there were the items with a difference of more than 10%p from the correct answer rate of similar items, among the items to which technology enhanced functions were applied following the introduction of CBT. According to the analysis of response rate of options, these results could be explained that the students' level of understanding could be more closely grasped through the innovative items developed through the technology enhanced function. Based on the results, we discussed some guidance to be considered when introducing CBT and developing items through CBT, and presented implications.

• Journal of Korean Home Economics Education Association
• /
• v.34 no.4
• /
• pp.143-161
• /
• 2022

The aim of this study is to identify the learning performance of online classes using problem-based learning(PBL) for clothing and textiles majors in college with the increased use of online learning tools after the COVID-19 pandemic. In order to achieve this goal, the PBL was developed and applied to the 'Fashion Marketing and Merchandising' class conducted in real-time online at University in North Chungcheong Province, Korea for four weeks. After a four-week PBL class, a survey was conducted on 35 students in the 'Fashion Marketing and Merchandising' class and the 35 completed questionnaires were used for analysis. The measurement tools of this study were self-directed learning, cooperative learning ability, problem-solving ability, and learning achievement regarded as an important learning effect in PBL class. In addition, students' self-reflective essays were also analyzed to examine the educational effect of PBL applying online classes. As a result of this study, bivariate correlations among the four variables, students' self-directed learning, cooperative learning ability, problem-solving ability, and learning achievement were significantly positive. Furthermore, the results of multiple regression analysis showed that the three independent variables had significant effects on students' perceived learning achievement, in the order of cooperative learning ability, self-directed learning, and problem-solving ability. The students' self-reflective essays indicated that problem-based learning worksheet was helpful for identifying problems, and clarifying what they already and what they need to study more. Based on this study, it could be recommended that online class applying PBL could contribute to the improvement of student's learning performance.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.3
• /
• pp.17-32
• /
• 2023

In recent years, the need for social ventures that aim to grow while solving social problems through the efficiency and effectiveness of commercial organizations in the market has increased, while there is a limit to how much the government and the public can do to solve social problems. Against this background, the number of social venture startups is increasing in the domestic startup ecosystem, and interest in impact investors, which are investors in social ventures, is also increasing. Therefore, this research utilized judgment analysis technology to objectively analyze the validity and weight of judgment information based on the cognitive process and decision-making environment in the investment decision-making of impact investors. We proceeded with the research by constructing three classifications; first, investment priorities at the initial investment stage for financial benefit and return on investment as an investor, second, the political skills of the entrepreneurs (teams) for the social impact and ripple power, and social venture coexistence and solidarity, third, the social mission of a social venture that meets the purpose of an impact investment fund. As a result of this research, first of all, the investment decision-making priorities of impact investors are the expertise of the entrepreneur (team), the potential rate of return when the entrepreneur (team) succeeds, and the social mission of the entrepreneur (team). Second, impact investors do not have a uniform understanding of the investment decision-making factors, and the factors that determine investment decisions are different, and there are differences in the degree of the weighting. Third, among the various investment decision-making factors of impact investment, "entrepreneur's (team's) networking ability", "entrepreneur's (team's) social insight", "entrepreneur's (team's) interpersonal influence" was relatively lower than the other four factors. The practical contribution through this research is to help social ventures understand the investment determinant factors of impact investors in the process of financing, and impact investors can be expected to improve the quality of investment decision-making by referring to the judgment cases and analysis of impact investors. The academic contribution is that it empirically investigated the investment priorities and weighting differences of impact investors.

• Journal of Intelligence and Information Systems
• /
• v.27 no.3
• /
• pp.57-73
• /
• 2021

Maintenance and prevention of failure through anomaly detection of ICT infrastructure is becoming important. System monitoring data is multidimensional time series data. When we deal with multidimensional time series data, we have difficulty in considering both characteristics of multidimensional data and characteristics of time series data. When dealing with multidimensional data, correlation between variables should be considered. Existing methods such as probability and linear base, distance base, etc. are degraded due to limitations called the curse of dimensions. In addition, time series data is preprocessed by applying sliding window technique and time series decomposition for self-correlation analysis. These techniques are the cause of increasing the dimension of data, so it is necessary to supplement them. The anomaly detection field is an old research field, and statistical methods and regression analysis were used in the early days. Currently, there are active studies to apply machine learning and artificial neural network technology to this field. Statistically based methods are difficult to apply when data is non-homogeneous, and do not detect local outliers well. The regression analysis method compares the predictive value and the actual value after learning the regression formula based on the parametric statistics and it detects abnormality. Anomaly detection using regression analysis has the disadvantage that the performance is lowered when the model is not solid and the noise or outliers of the data are included. There is a restriction that learning data with noise or outliers should be used. The autoencoder using artificial neural networks is learned to output as similar as possible to input data. It has many advantages compared to existing probability and linear model, cluster analysis, and map learning. It can be applied to data that does not satisfy probability distribution or linear assumption. In addition, it is possible to learn non-mapping without label data for teaching. However, there is a limitation of local outlier identification of multidimensional data in anomaly detection, and there is a problem that the dimension of data is greatly increased due to the characteristics of time series data. In this study, we propose a CMAE (Conditional Multimodal Autoencoder) that enhances the performance of anomaly detection by considering local outliers and time series characteristics. First, we applied Multimodal Autoencoder (MAE) to improve the limitations of local outlier identification of multidimensional data. Multimodals are commonly used to learn different types of inputs, such as voice and image. The different modal shares the bottleneck effect of Autoencoder and it learns correlation. In addition, CAE (Conditional Autoencoder) was used to learn the characteristics of time series data effectively without increasing the dimension of data. In general, conditional input mainly uses category variables, but in this study, time was used as a condition to learn periodicity. The CMAE model proposed in this paper was verified by comparing with the Unimodal Autoencoder (UAE) and Multi-modal Autoencoder (MAE). The restoration performance of Autoencoder for 41 variables was confirmed in the proposed model and the comparison model. The restoration performance is different by variables, and the restoration is normally well operated because the loss value is small for Memory, Disk, and Network modals in all three Autoencoder models. The process modal did not show a significant difference in all three models, and the CPU modal showed excellent performance in CMAE. ROC curve was prepared for the evaluation of anomaly detection performance in the proposed model and the comparison model, and AUC, accuracy, precision, recall, and F1-score were compared. In all indicators, the performance was shown in the order of CMAE, MAE, and AE. Especially, the reproduction rate was 0.9828 for CMAE, which can be confirmed to detect almost most of the abnormalities. The accuracy of the model was also improved and 87.12%, and the F1-score was 0.8883, which is considered to be suitable for anomaly detection. In practical aspect, the proposed model has an additional advantage in addition to performance improvement. The use of techniques such as time series decomposition and sliding windows has the disadvantage of managing unnecessary procedures; and their dimensional increase can cause a decrease in the computational speed in inference.The proposed model has characteristics that are easy to apply to practical tasks such as inference speed and model management.

• Journal of Korean Home Economics Education Association
• /
• v.25 no.1
• /
• pp.95-118
• /
• 2013

The purpose of this study was to analyze the contents of housing related to characters, objectives, and contents of FCS curricular from the 1st to 2009 revised curriculum of secondary school. The data were downloaded from the NCIC homepage(http://www.ncic.re.kr/2012. 04. 08) from the 1st(1955. 08) to 2009 revised curriculum(2012. 03) of secondary school. After examining the characters and objectives of each curriculum, contents of housing was analyzed by units and context elements of middle and high school separately. The titles of the subject, the objectives, the instructions, the leaning spheres, weekly hours, grade and gender of candidates, the emphasis of the instruction, etc. have been changed through the curriculum revision. The 6th curriculum was the main period to open to both genders, the $7^{th}$ was the period to combine with technology, the 2007 version was to change the structure of contents of home economics, and the 2009 version switched technology home economics from mandatory to optional in high school. The character of the courses was presented at the 1st curriculum, but it was left out from the $2^{nd}$ to $5^{th}$ curriculum. From the $6^{th}$ curriculum, the characters were separately given to middle and high school. The character of housing area started to appear only in high school home economics from the $7^{th}$ curriculum. The course objectives were described in all curriculum of both middle and high school. This applies to housing area as well. The course objectives have been modified in order to reflect value changes due to social issues. During each curriculum, contents of housing continued to change in context, course load, and candidates. Reflection of housing trends and social needs were the main causes of the change. 2009 version emphasizes on eco-life and sense of community.

• Asia Marketing Journal
• /
• v.14 no.1
• /
• pp.25-51
• /
• 2012

Researches about the relationship between SST(Self Service Technology) and TRI(Technology Readiness Index) have been carried out after TRI was developed by Parasuraman and his colleagues(2000). We hypothesize Consumer Readiness can also influence consumer's motivation, attitude, and intent to use SST. Currently, there has been no research on this subject. In this study, we investigated the relationship between TR, Consumer Readiness and SST Core Attitudinal Model which Dabholkar & Bagozzi(1994) proposed. The researchers also investigated moderating effects of consumer traits and situational factors to verify the acceptance of such forms of service delivery by all kinds of consumers and under different situational contexts. Self consciousness, the need for interaction with an employee, and the technology anxiety were used as consumer trait variables. Perceived waiting time and perceived crowding were used as situational variables. 380 questionnaires were distributed to a sample group of people in their 20's and 30's, and the data were analyzed with structural equation model using AMOS 18.0 program. All of Cronbach's alpha values representing reliabilities were satisfactory. The values of Composite Reliability(CR) and Average Variance Extracted(AVE) also showed the above criteria, thus providing evidence of convergent validity. To confirm discriminant validity among the constructs, confirmatory factor analysis and correlations among all the variables were examined. The results were satisfactory. The results of this study are summarized as follows. 1. Optimism and innovativeness of TR partially influenced the motivation to use SST. People who tend to be optimistic use SST because of ease of use and fun. The innovative however, usually use SST due to its performance. However, consumer readiness of role clarity, ability and self-efficacy influence all the components of motivation to use SST, ease of use, performance and fun. The relative effect of consumer readiness on the motivation to use SST was much stronger and more significant than that of TR. No other previous studies have examined the effects of Consumer Readiness on SST usage motivation, attitude and intention. It is academically meaningful that the researchers verified that Consumer Readiness is the important precedent construct influencing the self service technology core Attitudinal Model. Our findings suggest that marketers should consider fun and ease of use attributes to promote the use of self service technology. In addition, the SST usage frequency will rise rapidly when role clarity, ability, and self-efficacy which anybody can easily handle SST is assured. If the SST usage rate is increased, waiting times for customers could be decreased. Shorter waiting time could lead to higher customer satisfaction. It may also result in making a long-term profit owing to the reduced number of employees. Thus, presentation of using SST by employees or videos showing how to use it will promote the usage attitude and intent. 2. In SST core attitudinal model, performance and fun factors among SST usage motivation affected attitudes of using SST. The attitude of using SST highly influenced intent to use SST. This result is consistent with previous researches that dealt with the relationship between motivation, attitude and intention. Expectation of using SST could result in good performance just like the effect of ordering menu to service employees and to have fun since fun during its use could promote more SST usage rate. 3. In the relationship among motivation, attitude and intent in SST core attitudinal model, the moderating effect of consumer traits(self-consciousness, need for interaction with service employees and technology anxiety) and situational factors(perceived crowding and perceived waiting time) were tested. The results also supported the hypothesized moderating effects except perceived crowding. The highly self-conscious tended to form attitudes to use SST because of its fun compared to those who were less self-conscious because of its performance. People who had a high need for interaction with service employees tended to use SST for its performance. This result indicates that if ordering results are assured, SST is easily accessible to even consumers who have a high need for interaction with a service employee. When SST is easy to use, attitudes strengthen intent among people who had a high level of anxiety of technology. People who had low technology anxiety formed attitudes to use SST because of its performance. Service firms must ensure their self service technology is designed to be easy to use for those who have a high level of technology anxiety. Shorter perceived waiting times strengthened the attitude to use self service technology because of its fun. If the fun aspect is assured, people willing to use self service technology even perceive waiting time to be shorter than it actually is. Greater perceived waiting times form higher level of intent to use self service technology than those of shorter perceived waiting times. This implies that people view self service technology as a faster alternative to ordering service employees. The fun aspect of self service technology will attract a higher rate of usage for self service technology. 4. It has been proven that ease of use, performance and fun aspects are very important factors in motivation to form attitudes and intent to use self service technology regardless of the amount of perceived waiting time, self-consciousness, need for interaction with service employees, and technology anxiety. Service firms must consider these motivation aspects(ease of use, performance and fun)strongly in their promotion to use self service technology. Ease of use, assuring absolute performance compared to interaction with service employees', and adding a fun aspect will positively strengthen consumers' attitudes and intent to use self service technology. Summarizing the moderating effects, fun is the most valuable factor triggering SST usage attitude and intention. Therefore, designing self service technology to be fun will be the key to its success. This study focused on the touch screen self service technology in fast food restaurant. Although it has its limits due to the fact that it is hard to generalize the results to any other self service technology, the conceptual framework of this study can be applied to future research of any other service site.