• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.04a
• /
• pp.21-22
• /
• 1994

정밀화학공업에서 고부가 제품을 생산하기 위해 다양한 정제공정을 사용하고 있다. 특히 염료, 안료 제조공정에서 사용되는 다량의 염을 정제공정에서 효과적으로 분리시키는 것은 중요하다. Diafiltration을 이용한 탈염공정에는 주로 UF막이 분자량이 큰 물질의 탈염에 사용되었다. 그러나 NF막의 개발에 따라 분자량이 작은 의약품, 염료등의 정체에 분리막을 이용한 Diafiltration이 적극 사용되고 있다. 본 연구에서는 염료 중간체인 2-formylbenzene sulfonic acid, sodium salt(FBS)의 정체에 NF막의 적용가능성을 상업용 막을 이용하여 조사하였다.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.405-410
• /
• 2011

High-performance of an electric double layer capacitance (EDLC) electrode was prepared by the amino-fluorination of activated carbon by using $NF_3$ gas. The pore structure and surface chemistry were investigated based on the specific capacitance of EDLC. The amino-fluorination of activated carbon introduced functional groups of nitrogen and fluorine which are beneficial for the specific capacitance of EDLC without the change of pore structures. The E-NF100AC electrode, which has nitrogen and fluorine functional groups less than 1 at%, showed the highly improved specific capacitance of 528 (${\pm}9$) F/g at 2 mV/s showing 122% improved value when comparing with that of non-functionalized E-RAC electrodes. Whereas, the E-NF200AC electrode, which has nitrogen and fluorine functional groups over 1 at%, showed the decreased specific capacitance because of perfluorinated introduction. So, it is concluded that the proper contents of nitrogen and fluorine groups improved the specific capacitance of EDLC.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.4
• /
• pp.5-18
• /
• 1995

공작기계는 금속가공 공업에 있어서 가장 중요한 생산수단의 요소이며, 공작기계의 발달없이 인류의 생활수준을 향상시킨다는 것은 생각도 할 수 없는 일이다. 선진국에서는 제조된 기계의 약 10%가 공작기계이며, 기계공업 노동력의 악 10%가 공작기계 산업에 종사하고 있다. 공작기계는 금속재료를 절삭(Cutting) 또는 연삭(Grinding)하여 원하는 모양, 치수 표면정도의 제품을 얻는 것이고 기계본체와 공구의 두부분으로 되어있어 동력에 의해 기계를 운전하고 절삭공구로써 가공을 한다. 국제 규격의 ISO에서는 '한 운동원에 의해서 작동하고 물리적, 화학적 또는 기타의 방법으로 성형해서 공작물을 생산하는, 수작업은 하지 않는 기계'라고 정의 하고 있으며 미국에서는 금속가공기계를 두가지로 나누어 정형형을 Forming machine이라 하고 절삭형을 Cutting machine 이라 분류하며 이 둘을 합하여 공작기계(Machine Tool)라고 부르고 있다.

• Applied Chemistry for Engineering
• /
• v.22 no.4
• /
• pp.343-347
• /
• 2011

Due to the strong dependence on fossil fuels within the history of human progress, it leads to disaster of the whole world like flood, shortage of water and extinction of the species. In order to curb carbon dioxide emissions, many technologies are being developed. Among them, porous carbon materials have important advantages over other absorbent, such as high surface area, thermal and chemical resistance, low cost, various pore distribution and low energy requirement for their regeneration. Carbon capture and storage (CCS) has attracted the significant research efforts for reducing green house gas emission using several absorbent and process. Moreover, the absorbent are used for the separation of bio mass gas that contains methane which is considered a promising fuel as new green energy resource. In this review, we summarized the recent studies and trend about the porous carbon materials for CCS as well as separation from the biogas.

• Membrane Journal
• /
• v.3 no.2
• /
• pp.41-50
• /
• 1993

최근 산업의 고도화 및 다변화호 인한 고순도, 고품위의 제품이 요구됨에 따라 분리공정은 대단히 중요한 공정으로 인정되고 있어 화학공업, 식품공업, 약품공업 등의 공업분야뿐만 아니라 의료, 생화학 및 환경분야에 이르기까지 중요한 연구과제가 되고 있다. 분리공정은 열역학적 상평형 원리에 기인한 분리방법과 물질이동 즉, 이동속도 원리에 기인한 분리방법과 물질이도 즉, 이동속도 원리에 기인한 분리방법으로 구별할 수 있는데 이는 혼합물의 동적 성질, 특히 확산성이나 침투속도가 서로 다른 것을 이용한 것이다. 막을 이용한 분리공정은 막의형태, 조작원리 및 적용분야에 다라 정밀여과, 한외여과, 역삼투, 기체분리 및 투과증발 등으로 분류되며 이는 고분자막에 존재하는 Pore의 크기, 막의 균일성, 대칭성 및 막의 하전형태에 따라 구분한다.

• Prospectives of Industrial Chemistry
• /
• v.23 no.6
• /
• pp.14-24
• /
• 2020

최근 우수한 발광 특성을 갖는 양자점을 고해상도 디스플레이의 발광 소재로 도입하고자 하는 노력이 활발하다. 양자점을 활용한 디스플레이의 실현을 위해서는 콜로이드 상태인 다색의 양자점을 고해상도로 패터닝하는 기술의 확립이 필요하다. 본 연구에서는 ethane-1,2-diyl bis(4-azido-2,3,5,6-tetrafluorobenzoate)를 양자점용 가교제로 활용하여 용액공정을 기반으로 형성된 양자점 박막을 고해상도로 패터닝한 기술을 소개하고자 한다. 위 양자점용 가교제의 양 말단에는 아지드 그룹을 포함한 작용기가 존재한다. 아지드 기는 자외선에 의해 광 활성화되어 양자점 표면의 알킬 리간드와 가교 결합을 형성함으로써, 양자점 박막에 화학적 내구성을 부여한다. 본 기술을 기반으로, 적색, 녹색, 청색의 카드뮴 기반 양자점을 고해상도로 패터닝하고 정밀하게 배열하여 인치 당 화소 수 1400 이상의 픽셀 형성에 성공하였다. 또한 가교 반응 후에도 성능 저하가 없는 양자점 박막 및 자발광 양자점 다이오드를 개발하였다.

• Applied Chemistry for Engineering
• /
• v.22 no.1
• /
• pp.26-30
• /
• 2011

In order to improve the energy conversion efficiency of dye-sensitized solar cell (DSSC), the photoelectrode was manufactured by using $TiO_2$ and $WO_3$ on combination effects of two conduction bands. The smash procedure of $TiO_2$ and $WO_3$ was carried out by using a paint shaker to enlarge the contact area of semiconductor with dye and electrolyte. The energy conversion efficiency of prepared DSSC was improved about two times from current-voltage curve based on effects of $WO_3$ and smash. The mechanism was suggested that the conduction band of $WO_3$ worked for prohibiting the trapping effects of electrons in conduction band of $TiO_2$. This result is attributed to the prevention of electron recombination between electron in conduction band of $TiO_2$ with dye and electrolyte. Impedance results indicate the improved electron transport at interface of $TiO_2$/dye/electrolyte.

• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.313-315
• /
• 2019

A new synthetic method for N-hydroxysuccinimide (NHS), which is widely used in fine chemical and cosmetic industries, was developed. In a conventional synthesis, NHS is obtained by reacting $NH_2OH$ with succinic anhydride in a yield of about 70% using strong acid as a catalyst, which has an advantage of obtaining NHS relatively easily. However, it is expensive because of using a high cost succinic anhydride. In order to overcome this issue, we developed a new synthetic method for NHS with a moderate yield of 80% using a low cost succinic acid instead of succinic anhydride, alongside a stable Lewis acid catalyst, Zn acetate. As a result of the economic evaluation, it was confirmed that the cost reduction effect was about 15%.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.16-21
• /
• 1999

Recently, the rheology on the fluidity of materials has been progressed remarkably. Viscosity measurement for precision-accuracy has needed very important to measure the rheological properties of materials in the field of chemistry-fiber, paint, printing-ink, plastics, rubber, foodstuff-industry, etc. And many methods of measurement have been developed lately. So in this experimental study, small capacity torque transducer with type of strain gage, different method against other existing viscometers, measured viscosity about a liquid that has flowing characteristics of newtonian liquid. Using the assumed computational equation of viscosity, it has same value of viscosity in each different radius of rotating cylinder. In the result, this equipment will be used in the viscosity measurement of a liquid taking flowing characteristics of newtonian liquid.

• Applied Chemistry for Engineering
• /
• v.22 no.2
• /
• pp.133-137
• /
• 2011

In this study, illite was size-reduced using a wet-ball-milling treatment to improve its dispersion. Changes in illite particle size, size distribution, and dispersion characteristics after varying the treatment period were investigated. And the dispersion and dispersion stability of illite solution after 2 h wet ball milling treatment with different pH conditions were also evaluated. The illite particle size significantly decreased as the treatment time increased and the size reduction effect of wet ball milling deteriorated above 2 h treatment time. In addition, illite particle size was more evenly distributed as the treatment time increased. X-ray diffraction (XRD) analysis showed that no crystal structural changes of illite were induced, but the characteristic peak of illite the weaker due to the size reduction and exfoliation, as the treatment time increased. Zeta potential analysis showed that the illite dispersion improved, as the treatment time increased. The illite wet-ball-mill treated at pH 2 had the lowest dispersion stability. Illite dispersion and dispersion stability increased as pH increased, due to the increase in surface ionization. Hence, the results showed that as the treatment time increased, the illite particle size decreased, and dispersion and dispersion stability improved due to the increase in surface energy and repulsion force between particles.