• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.30 no.5
• /
• pp.493-500
• /
• 2012

The previous geoid model developed in early 2000s shows 14cm level of precision due to the problems on distribution, and quality of the land gravity and GPS/Leveling data. From 2007, the new land and airborne gravity data as well as GPS/Leveling data having high quality and regular distribution has been obtained. In 2011, a new gravimetric geoid model has been constructed with precision of 5.29cm which was improved about 27% comparing to the previous model. However, much more land gravity data has been collected at the control point, bench marks and triangulation points since 2010. Also, GPS/Leveling data having 10km spacing over whole country has been obtained through the project which is for the construction of new control points. In this study, new gravimetric geoid has been calculated based on the all available gravity data up to present. The geoid height shows the range from 18.05m to 32.70m over whole country and its precision is 5.76cm. The degree of fit and precision of hybrid geoid model are 3.60cm and 4.06cm, respectively. At the end, 3.35cm of the relative precision in 15km baseline has been calculated to confirm its practical usage. Especially, it has been founded that regional bias occurred at the Kangwon and coastal area due to problems on the leveling data. Also, some inland points show inconsistent large difference which needs to be verified by analyzing the unified control points results.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.28 no.5D
• /
• pp.741-747
• /
• 2008

Nowadays, the accuracy of the geoid model has been improved through development of the combination model which was composed of traditional gravimetric geoid and geometric geoid by the GPS/leveling data in USA and Japan. It is a state of the art method in geoid modeling field that what so called hybrid geoid. In this paper, as a basic study to develop Korean hybrid geoid model, we studied gravimetric geoid solutions using three gravity reduction methods (Helmert's condensation method, RTM method and Airy-isostatic method) and evaluated the usefulness of each method in context of precise geoid. The gravimetric geoid model were determined by restoring the gravity anomalies (included TC) and the indirect effects were made from various reduction methods on the EIGEN-CG03C reference field. The results are compared with respect to the geometric geoid undulation determined from 498 GPS/leveling after LSC fitting. The results showed that hybrid geoid with RTM (Residual terrain model) reduction method was most accurate method and the value of the difference compared to geometric geoid was $0.001{\pm}0.053m$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.1
• /
• pp.51-61
• /
• 2008

The determination of precise geoid model for the Jeju island is needed to minimize the effect of different vertical datums. This study describes the development of gravimetric geoid model referred to GRS80 reference surface for the area of Jeju island. We used ECM96 up to degree and order 360 as a reference model and added the terrain and the residual gravity effects to the reference model. After then 17 GPS/Levelling data were used to correct the difference between the GPS/Levelling-derived geoid heights and gravimetric geoid heights. The least square collocation was applied to derive the correction and the grid values. The final precise geoid model(Jeju_GEOID07) that consist of $0.75'{\times}1'$(about $1.4km{\times}1.5km)$ grid interval was obtained in the region of $33^{\circ}{\sim}33.8^{\circ}N$ and $125.8^{\circ}{\sim}127.2^{\circ}E$. Concerning this works, the precise geoid for the Korean peninsula should be determined by integrating the different geoid developed for the peninsula and Jeju island. It is also need to integrate the vertical datum using long-term tide and GPS observations.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.35-39
• /
• 2009

The equal distribution of the gravity as well as the topographic data is an essential factor in the precision geoid determination. In this study, the area where needs the supplementary gravity survey is assigned through a simulation to build the 5cm level geoid. Based on the current distribution of the gravity data which results in the 8cm level of the precision over all, we extract the area which shows the errors larger than 30 cm. Then, the area is assumed to be filled with gravity data with 2km interval which is turned out to be successfully improving the overall accuracy up to 5cm. Therefore, it is recommended that the supplementary gravity survey should be conducted in mountainous area such as eastern and mid-northern part of Kangwon-Do to achieve the 5cm accuracy on the geoid.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.81-89
• /
• 2011

The previous land gravity data in Korea showed locally biased irregular distribution. Especially, this problem was more serious in the mountainous area where the data density was significantly low. The same problem appeared in GPS/Levelling data thus the precision of the geoid could not be improved. From 2008, new gravity and GPS/Levelling data has been collected by the unified control point and survey on the benchmark project which were funded by the national geographic information institute. The newly obtained data has much better distribution and precision so that it could be used for update precision of geoid model. In this study, the new precision geoid has been calculated based old and new gravity data and this model showed 5.29cm of precision compared to 927 points of GPS/Levelling data. And the degree of fit and precision of hybrid geoid has been calculated 2.99cm and 3.67cm. The new gravimetric geoid has been updated about 27% over whole country. And it showed 42% of precision update due to collection of new gravity data on the Kangwon/Kyeongsang area which showed quite low distribution. In 2010, about 4,000 points of gravity and 300 points of GPS/Levelling data has been obtained by unified control and survey on benchmark project. We expect that new data will contribute to updating geoid precision and veri tying precision more objectively.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.16 no.2
• /
• pp.213-223
• /
• 1998

This paper deals with the geoid modelling in and around Korean peninsula referred to Bessel ellipsoid. Several useful data were used to compute precise geoidal heights referred to GRS80 by remove and restore technique and FFT technique was used to evaluate Stokes' integral. All grid point elevations extracted from GTOPO 30 and Bessel coordinates of all grid point were computed through coordinates transformation by applying three transformation parameters. Finally, geoidal heights referred to Bessel ellipsoid were calculated by geometric method. As the results of this study, a precise gravimetric geoid model referred to GRS80 (KOGGDM33) and geoid model referred to Bessel ellipsoid(KOBGDM33) in and around Korean peninsula were developed. KOBGDM33 shows the gradual distribution of geoidal heights from -91.8 m in Yongampo to -39.0 m in the straits of Korea.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.4
• /
• pp.351-357
• /
• 2011

In this study, we have intended to analyze the possibility of using the precise geoid model and to find the best geoid model for working by the airborne LiDAR system. So we have calculated the geoid height from the precise geoid models (KGEOID08, EGM2008, EIGEN-CG03C) and have analyzed results by comparing the geometric geoid height from surveying and geoid heights from geoid models. As a result, the KGEOID08 that had 0.152m of RMSE was assessed the best geoid model for making DEM(DTM) by airborne LiDAR system. Also we have found the needed arrangement and numbers of reference point when the KGEOID08 was used for conversion into orthometric height of LiDAR data.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.5
• /
• pp.519-527
• /
• 2008

The basic elements in precise geoid determination are the gravity and topographic data with reliable quality and distribution. In this study, the effect of the gravity and topographic data on the precision of the geoid are analyzed through simulations in which the quality and distribution of the data are artificially controlled. It was found that the distribution of the topographic data has more effect on the precision of geoid than the quality of the it. This leads to the conclusion that the SRTM (Shuttle Radar Topography Mission) DTM (Digital Terrain Model) with resolution of 90m is qualified as a topographic data in geoid determination. In the experiments with gravity data, on the other hand, the aliasing effect caused by the low data density caused large errors in geoid. It was found that the more gravity data especially in north-eastern mountainous area is needed for precise geoid determination in Korea.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.2
• /
• pp.159-167
• /
• 2009

To obtain the gravity data with consistent quality and good distribution over Korea, to overcome the difficulties in constructing precision geoid from biased distribution of ground data, to resolve the discrepancy between the ground and ocean gravity data, an airborne gravity survey was conducted from Dec. 2008 to Jan. 2009. The data was measured at the average flying height of 3,000m and the data with cross-over error of 2.21mGal is obtained. The geoid constructed using this airborne gravity data shows the range of 9.34 $\sim$ 33.88m. Comparing the geoid with respect to the GPS/levelling data, a precision of 0.145m is obtained. After fitting, the degree of fit to GPS/levelling data was calculated about 5cm. It was found that there exists large biases in the area of south-western and northern part of the peninsular which is considered to be the effect of distorted vertical datum in Korea. Thus, more investigation on vertical datum would be needed in near future.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.20 no.4
• /
• pp.383-388
• /
• 2002

This study suggests a data processing method for precise geoid height calculation through sea gravity data of mid-Yellow Sea provided by Haeyang 2000 and satellite altimetry data and the EGM96 geopotential model from GSFC/DMA in USA. Also it compared sea gravity data with satellite altimetry gravity data. As a result, precise geoidal undulation of the mid-Yellow Sea presented from calculating and integrating EGM96 geopotential model in degree and order 167 and a relative geoid by integral radius of 27km respectively It has a mean value of 18.339m, varying from 13.564m to 22.785m. the comparison between sea gravity data and satellite altimetry data shows that the former is more precise than the latter, which showed an anomaly of 0.56m0Gal and RMSE of 4.195m.