• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.9
• /
• pp.1913-1920
• /
• 2009

An intelligent accurate sun tracking controller for solar lighting system was developed. This controller can detect the faulty sensor and correct the error signal based on Principle Component Analysis theory. A fuzzy controller was developed to control the tracker by using the collected sensor signal for precise position control. Also a multiple range searching sensor module for sun tracking was designed. To show the validity of the developed system, some experiments in the field were illustrated.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.894-897
• /
• 2004

In this paper, we address a position control scheme for a stage system, which is levitated and driven by electric magnetic actuators. This consists of a levitating object (called platen) with 4 permanent magnetic linear synchronous motors in parallel. Each motor generates vertical force for suspension against gravity and propulsion force horizontally as well. This stage can generate six degrees of freedom motion by the vertical and horizontal forces. Dynamic equations of the stage system are derived based on Newton-Euler method and its special Jacobian matrix describing a relation between the Joint velocity and platen velocity is done. There are proposed two control schemes for positioning, which are Cartesian space controller and Joint space controller. The control performance of the Cartesian space controller is better than the Joint space controller in task space trajectory while the Joint space controller is simpler than the Cartesian space controller in controller realization.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.221-225
• /
• 2001

Recently, high accuracy and high precision are required in various industrial fields that are composed of semiconductor manufacturing apparatus and ultra precision positioning apparatus and information system and so on. The positioning technology is a very important one among them. This technology has been rapidly developed, its field needs for positioning accuracy to high as submicron. It is expected that accuracy with 10 nm in precision working and accuracy with 1 nm in ultra precision working are reached at the beginning of 2000s. Recently, to accomplish this positioning technology, many researches are concerned about it and make efforts it. This paper contain design technology of ultra precision 2-axis(X-Y Delta) stage for materialize to positioning accuracy with submicron, where, Delta stage is design as optimum against load and disturbance. And computer simulation is performed for stability and dynamic characteristic of Delta stage.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.196-202
• /
• 2000

In the precision point synthesis of mechanisms, it is usually required to solve a system of polynomial equations. With the aid of efficient algorithms such as elimination, it is possible to obtain all the solutions of the equations in the complex domain. But among these solutions only real values can be used fur real mechanisms, while imaginary ones are liable to be discarded. In this article, a method is presented, which leads the imaginary solutions to real domain permitting slight alteration of prescribed positions and eventually increases the number of feasible mechanisms satisfying the desired motion approximately. Two synthesis problems of planar 4-bar path generation and spatial 7-bar motion generation are given to verify the proposed method.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.10
• /
• pp.50-57
• /
• 1997

A fast tool servo (FTS) for diamond turning improves machining accuracy by quickly compensating relative position errors between the cutter and the workpiece. Therefore, the FTS needs to have large band-width with good tracking performance. Serious hysteresis nonlinearity of PZT actuators used in the FTS, however, deteriorates fast tracking performance. Several types of feedforward hysteresis compensators and feedback controllers are tested to improve tracking performance. Through simulations and experiments, control structure which yields the smallest tracking error is selected. The maximum peak to peak error in tracking a sinusoidal waveform is reduced by one fifth compared to that of a regular PID controller.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.1
• /
• pp.19-26
• /
• 2007

This paper presents a precision position control of induction motor using disturbance observer to reduce disturbance effects. It shows that proposed algorithm is strong in induction motor precision control for disturbance change. This system with disturbance observer using deadbeat control, which has high benefit, is good for quick disturbance compensation. To show this effectiveness the whole process is simulated by simulink, and also experimented by DSP6416 with TCP-IP network board.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.11
• /
• pp.9-15
• /
• 1999

A piezoelectric actuator is widely used in precision positioning applications due to its excellent positioning resolution. However, the piezoelectric actuator lacks in repeatability because of its inherently high hysteresis characteristic between voltage and displacement. In this paper, a controller is proposed to compensate the hysteresis nonlinearity. The controller is composed of a PID and a neural network part in parallel manner. The output of the PID controller is used to teach the neural network controller by the unsupervised learning method. In addition, the PID controller stabilizes the piezoelectric actuator in the beginning of the learning process, when the neural network controller is not learned. However, after the learning process the piezoelectric actuator is mainly controlled by the neural netwok controller. In this paper, the excellent tracking performance of the proposed controller was verified by experiments and was compared with the classical PID controller.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.873-875
• /
• 2008

In sensor network, the elimination of NLOS information is a necessity to improve the accuracy of the localization. For this reason, we proposed an algorithm iteratively eliminating the NLOS information to enhance the accuracy of the localization of a tag location, and simulated the proposed algorithm to confirm the performance. The proposed algorithm can estimate the location of the error distance within 3.5m when it has 10 LOS coordinates with LOS information. In addition, it can enhance the accuracy according to decreasing NLOS coordinates.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.565-567
• /
• 2018

The rover acquires its own position information using satellites signals provided by several satellites(at least four or more). For the present, GNSS systems are widely used in various fields. However, there are many factors that cause accuracy errors in positioning between rovers and GNSS satellites. Due to satellite time error, orbit error, ionospheric & convective refraction, multipath, etc., rover can't acquire precise position. Differential GPS(DGPS) and Real-Time Kinematic(RTK) have been developed as compensation techniques to reduce such errors. In this paper, we intend to develop a terminal with RTK technique to acquire precise position information of mobile station.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.17-18
• /
• 2012