• 자동차안전학회지
• /
• 제9권2호
• /
• pp.20-25
• /
• 2017

KNCAP is a program to evaluate the automobile safety, providing consumer vehicle safety assessment results. The safety evaluation tests are Frontal Impact, Offset Frontal Crash, Side Crash, Side Pole Crash, Rear Impact. This is the study of the offset frontal impact safety evaluation. Currently, IIHS is performing a small overlap test. NHTSA plans to implement the oblique moving deformable barrier test. Euro-NCAP plans to implement a mobile frontal impact test. Simulation is used to compare occupant behavior and injury. We have investigated whether the introduction of the test at KNCAP is necessary. The dummy model used in the simulation was the 50th percentile male Hybrid III dummy.

• 자동차안전학회지
• /
• 제15권1호
• /
• pp.55-62
• /
• 2023

In this study, a chest deflection is predicted by introducing a deep learning technique with the results of the frontal impact of the USNCAP conducted for 110 car models from MY2018 to MY2020. The 120 data are divided into training data and test data, and the training data is divided into training data and validation data to determine the hyperparameters. In this process, the deceleration data of each vehicle is averaged in units of 10 ms from crash pulses measured up to 100 ms. The performance of the deep learning model is measured by the indices of the mean squared error and the mean absolute error on the test data. A DNN (Deep Neural Network) model can give different predictions for the same hyperparameter values at every run. Considering this, the mean and standard deviation of the MSE (Mean Squared Error) and the MAE (Mean Absolute Error) are calculated. In addition, the deep learning model performance according to the inclusion of CVW (Curb Vehicle Weight) is also reviewed.

• 자동차안전학회지
• /
• 제15권4호
• /
• pp.95-101
• /
• 2023

As the popularization of autonomous vehicles is anticipated, it is expected that the variety of passenger postures will diversify. However, the current vehicle safety system is expected to be inadequate for accommodating these diverse passenger postures, particularly in reclined positions where severe injuries have been reported in frontal collisions. Therefore, it is necessary to investigate the biomechanical responses and tolerances of occupants in reclined postures. In this study, the behavior and injuries of a Hybrid-III dummy model in a reclined position are analyzed through frontal collision sled simulations equipped with the semi-rigid seat provided by the previous study, three-point safety belt with pretensioner and load limiter, and airbag models. The results are evaluated by comparing thouse reponses with post-mortem human surrogate (PMHS) data, and the findings are expected to be applicable to the basic design of a new restraint system suitable for various postures in autonomous vehicles.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2015년도 춘계학술대회
• /
• pp.11-12
• /
• 2015

두 선박이 정면에서 마주치며 선박간 상호 통항하거나 상대선을 추월할 경우 각 선박의 선체형상과 선속에 의한 유체력 상호작용에 따른 선박간 간섭력이 발생한다. 선박간 간섭력의 주요한 평가 요소인 횡력과 회두 모멘트의 측정을 통해 두 선박이 근접하였을 때의 위험도와 충돌을 예측할 수 있다. 선행된 간섭력에 관한 연구는 대부분 경험에 의하거나 이론적인 측면에서 관련 연구가 진행되어왔으며, 학계에서 통상적으로 널리 알려진 뉴턴의 연구(1960)에서는 깊은 수심에서 두 선박을 평행하게 항주시켰을 때 선박간 최대 흡인력은 두 선박이 정횡으로 나란하게 위치되는 지점에서 발생하고, 이때의 간섭력은 선속의 제곱에 비례한다고 추정하였다. 현대의 조선기술이 발전함에 따라 선박의 크기는 점점 대형화되고 선박의 운항 효율성 증진을 위한 다양한 선형이 개발되어 실선에 적용되고 있다. 이런 경향에 따라 과거에 비해 현대 선박 운항환경에서의 선박간 간섭은 선박의 크기 및 선형에 의한 영향이 클 것으로 판단된다. 본 연구에서는 선박의 종류별로 대표 선종을 선정하여 두 선박이 정면에서 마주치며 통과하는 운항조건에서의 선속 증가에 따른 선박 상호간 간섭력의 변화를 통상적으로 사용되는 선박조종시뮬레이터를 이용하여 실험 및 분석하여 상관관계를 도출하였다. 선박 유형에 따른 시뮬레이션 실험 결과 최대 횡력은 주로 선미 부근에서 발생하였고 최대 회두모멘트는 선수가 근접할 때 발생하였으며, 선속이 증가할수록 선박 상호간 근접거리가 좁혀졌고 선형별로 각기 다른 선속에서 선미 충돌이 발생하였다. 이 실험연구는 선형에 따른 선박 상호간 근접 시의 횡거리와 통과속력에 대한 기준 설정의 연구 근간을 마련하였고 선박간 교항시 안전운항을 위한 지침이 될 것으로 판단된다.

• 한국자동차공학회논문집
• /
• 제4권2호
• /
• pp.189-197
• /
• 1996

In this study, the crashworthiness analysis was carried out for the hat type section side rails which had an important role of absorbing the impact energy during frontal crash. In case of a tapered hat type section model, numerical simulation models and test models were designed with varing design variables; welding pitch, taper angle, initiator shape, initiator location. The effect of variation of the design variables was investigated by quasi-static and dynamic test and numerical simulation.

• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.155-160
• /
• 2003

For the weight reduction of vehicle body up to 20∼30% compared to the conventional monocoque steel body·.in-white, most automotive manufacturers have attempted to develop the aluminum intensive body-in-white using an aluminum space frame. In this paper, the crush tests and simulations for the aluminum extrusions filled with the structural from are performed to evaluate the collapse characteristics of that light weighted material. From these studies. the effectiveness of structural for is evaluated in improving automotive crashworthiness. In order to improve the improve energy absorption capability of the aluminum space frame body, safety design modifications are performed and analyzed based on the suggested collapse initiator concepts and on the application of the aluminum extrusions filled with structural foam. The effectiveness of these design concepts on the frontal and side impact characteristics of the aluminum intensive vehicle structure is investigated and summarized.

• 한국자동차공학회논문집
• /
• 제15권5호
• /
• pp.72-77
• /
• 2007

Since 2000, sports utility vehicles(SUVs) occupy about 40% of domestic vehicle sales. As sports utility vehicle sales are increased the probability of crash accident between SUVs and passenger vehicles increases. Generally, SUVs are heavier than passenger vehicles and their drive height and front end stillness are higher than passenger vehicles. Because of these characteristics SUVs cause more severe injury and fatal injury in SUV to passenger vehicle head-on impact. To evaluate SUV's aggessivity to passenger vehicle, we carried out SUV to passenger vehicle head-on crash test. And finally the way how to reduce incompatibility between SUVs and passenger vehicles is suggested.

• 한국자동차공학회논문집
• /
• 제11권5호
• /
• pp.134-139
• /
• 2003

The car crash accidents in low speed occurs most frequently. Damage on a conventional bumper after the car accident causes the bumper to get fixed most of time. This study shows how a gas tube bumper reduces a damageability and increase repairability after the car accidents. The 15 km/h 40% offset front and rear crash test recommended by RCAR (Research council for automobile repairs) standard was performed and evaluated damages on the gas tube bumper by the pendulum impact tester. In this study, the gas tube bumper reduces damageability and increases repairability after car crash accidents. In addition, car frame design to apply the gas tube bumper may consider to be changed.

• 한국산학기술학회논문지
• /
• 제12권4호
• /
• pp.1552-1558
• /
• 2011

본 논문에서는 알루미늄 폼을 사용한 자동차 범퍼 빔을 설계하고 충돌해석을 수행하였다. 해석모델은 B형 단면 구조를 갖는 실제 크기의 범퍼 빔이다. 저속 정면충돌 시 알루미늄 범퍼 빔의 변형량 및 내부 에너지 거동을 예측할 수 있는 ANSYS AUTODYN을 이용하였다. 7075-T6 알루미늄 합금을 사용하여 철강 재질의 빔보다 55 %의 중량 감소를 얻을 수 있었으며 알루미늄 폼을 사용한 범퍼 빔의 변형량은 철강 빔과 비슷하지만 충돌에너지의 감소가 더 큰 것을 확인할 수 있었다. 또한, 알루미늄 폼의 완충보다는 50 % 충진 시 충돌에너지 흡수가 더 좋았다.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.90-97
• /
• 2009

One of the most important factors that affect a person's risk of injury in a motor vehicle crash is the age of the person. This study investigates the characteristics of crash injuries among young, middle-aged and older drivers and occupants. Based on the comprehensive claim data from automobile insurance from 2000 to 2007, this study examines in great detail the drivers and occupants injury body regions and severity by age in car-to-car frontal crashes. It has been shown that elderly drivers and occupants suffer more injuries at a chest region compared to the middle-aged group. This research calls attention to the need for design to make vehicles more protective for older drivers in car-to car frontal crashes.