• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.348-352
• /
• 2016

This paper addresses the efficient improvement of the Switched Reluctance Motor(SRM) by the proper voltage excitation. In the case of loads with large operational motor-speed differences such as washing machine, an SRM system driven by a constant DC-link voltage is not useful for improving the efficiency. To reduce the effect of the excess DC-link voltage, AC-DC control converter that uses a silicon controlled rectifier instead of diode rectifier is employed in the SRM driver system. AC-DC control converter supplies a proper link voltage for low-speed operation. The experimental results demonstrated that the efficiency of the system was improved at low speeds.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.363-365
• /
• 2006

소비자의 요구와 기술력의 발달로 PDP시장은 42인치와 60인치등 대형PDP가 주류를 이루고 있으며 대형화에 따라서 PDP전원의 소모전력 또한 $400W{\sim}600W$ 까지 증가 하고 있다. 기존 소용량 PDP전원으로 사용되던 Flyback의 경우 소모 전력이 증가함에 따라 대형PDP에 적용하기에는 소자 내압 및 시스템 효율 측면에서 다소 무리가 있다. 따라서 대형PDP의 전원을 위해서 새로운 2 Switch 3 Diode를 채용한 고효율 DCR (Diode Clamping Rectifier) Flyback Converter를 제안하였으며 이를 42인치 PDP에 적용하여 회로의 타당성 및 우수성을 검증하였다.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.43 no.4 s.310
• /
• pp.53-59
• /
• 2006

This paper describes the new design technique of full wave rectifier (FWR) for precise measurement instrument and the chip implementation of this FWR circuit with measurement results. Conventional circuits have some problems of complex design and limited output range( $VDD/2{\sim}VLIIV1IT+$). Proposed FWR circuit was simply designed with two 2x1 MUXs, one high speed comparator, and one differential difference amplifier(DDA). One rail-to-rail differential difference amplifier(DDA) performs the DC level shifting to VSS and 2X amplification simultaneously, and enables the full range ($Vss{\sim}VDD$) operation. The proposed FWR circuits shows more than 50% reduction of chip area and power consumption compared to conventional one. Proposed circuit was implemented with 0.35um 1-poly 2-metal CMOS process. Core size is $150um{\times}450um$ and power dissipation is 840uW with 3.3V single supply.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.4
• /
• pp.2055-2061
• /
• 2013

Recently, an understanding of new sources of liquid hydrocarbons such as bio-ethanol is economically very important. Successful design of distillation columns in a separation process depend on the availability of accurate vapor-liquid equilibrium data. For the binary system of Ethanol/3-methyl-l-butanol mixture, isothermal Vapor-liquid equilibrium data were measured at temperature of 50, 55, 60, 65, 70, 75 and $80^{\circ}C$. An empirical relation to predict Vapor-liquid equilibrium data was obtained from the above measured data. The predicted values are compared with the measured ones to be in a good agreement within accuracy of ${\pm}0.0005$, ${\pm}0.0022$.

• Proceedings of the KIPE Conference
• /
• 2008.06a
• /
• pp.209-212
• /
• 2008

본 논문에서는 연료전지자동차의 저전압 배터리 충 방전을 위한 새로운 3상 양방향 DC-DC 컨버터를 제안한다. 12V 저전압측의 높은 전류정격 때문에 기존의 풀브리지 방식으로는 적절한 스위치의 선정이 어렵지만 제안한 3상의 전류분배로 스위치의 선정과 변압기의 제작이 용이하다. 그리고 제안한 변압기 결선으로 턴비가 작아져 누설인덕턴스가 작아진다. 또한 비대칭 PWM에 의한 모든 스위치의 ZVS 턴온과 저전압 측에서는 동기정류 방식을 적용하여 효율을 상승시켰다. 제안하는 컨버터의 동작원리를 기술하고 3.5kW 시작품을 제작하여 실험을 통해 본 방식의 타당성을 검증한다.

• Journal of Aerospace System Engineering
• /
• v.17 no.4
• /
• pp.28-33
• /
• 2023

In this study, computational fluid dynamics was used to analyze the flow bias generated as air supplied by a fan passes through ducts, piping, and a coal separation screen. The flow bias of the air flow is mostly caused by the spatial characteristics of the fan volute and duct, and the internal baffle and the coal separation screen at the outlet cause strong pressure losses that dampen the flow bias. ANSYS CFX was used for computational fluid dynamics, and since the baffle and the coal separation screen are shaped like perforated plates with many small holes uniformly distributed, actual modeling for analysis was not possible. Therefore, the Porous Loss Model was applied. The evaluation of the flow bias was analyzed based on the velocity distribution of the Porous Loss Model at the outlet surface of the coal separation screen obtained from the computational fluid dynamics results.

• Journal of the Semiconductor & Display Technology
• /
• v.17 no.3
• /
• pp.21-26
• /
• 2018

In this paper, the switching characteristics of the active clamp type flyback converter, which is deemed suitable for the miniaturization of the external power supply for home appliance, were analyzed and the process of reducing the switching loss was explained. The active clamp type flyback converter operating in the DCM has confirmed that the surge voltage of the main switch does not occur and the turn-off / on loss of the switch do not occur in principle. Also, in the case of the switch for synchronous rectifier, it was showed that the switch current showed half-wave rectified sinusoidal characteristic, and the switching loss was reduced. The switching characteristics of the experimental results gathered from 120 W class prototype were compared with the theoretical waveform in the steady-state and it was confirmed that the power conversion efficiency of the active clamp type flyback converter was maintained high due to the reduction of the switching loss.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.5
• /
• pp.481-486
• /
• 2018

DC motors are classified as DC motors with brush structure and BLDC motors without brush structure. Representing the speed control of the BLDC motor is the PI control. The speed control using the PI controller has a disadvantage that the response characteristic to reach the steady state is slow. Therefore in this paper, a voltage controlled speed controller using a Fuzzy Logic Controller (FLC), which has a short steady response time and usefulness of nonlinear control. The validity and usefulness of the proposed fuzzy speed controller are verified by simulation through Simulink of MATLAB program. Experiments were performed on the PI controller and the proposed fuzzy speed controller in three cases with reference speeds of 500rpm, 800rpm, and 1500rpm. Experimental results show that the proposed fuzzy controller has more 30% improved steady state speed response than PI controller.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.1
• /
• pp.53-57
• /
• 2010

This study proposes the algorithm which drives the powerless without battery. The exiting wire or RF type dosimeter, which is the computation of the real time with battery on the dose radiation exposure, In the Wired dosimeter, it is trouble to need the maintenance and management by periods. Besides, the case of the RF typed dosimeter with battery, it is requested to size bigger and to replace battery frequently and so on. Especially RF typed dosimeter has trouble to need for the embody with large power consumption on the contactless typed dosimeter. As the method for the low power, the study designed to be down the operating clock of the MPC, to improve the efficiency of the rectifier, to eliminate the external memory and the DC-DC converter for the simplification of the circuit We convince our research contributes not only to understand the simplified circuit and miniaturization, but also to help the design and application technology of the powerless dosimeter.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.63-70
• /
• 2013

This paper describes a high PSRR low-dropout(LDO) linear regulator for wide frequency range without output-capacitor. Owing to both of the cascode compensation technique and the current buffer compensation technique in nested Miller compensation loop, the proposed LDO not only maintaines high stability but also achieves high PSRR over wide frequency range with reasonable on-chip capacitances. Since the external capacitor is removed by the proposed compensation techniques, the cost for pad is eliminated. The designed LDO works under the input voltage range from 2.5V to 4.5V and provides up to 10mA load current with the output voltage of 1.8V. The LDO was implemented with 0.18um CMOS technology and the area is 300um X 120 um. The measured power supply rejection ratio(PSRR) is -76dB and -43dB at DC and 1MHz, respectively. The operating current is 25uA.