• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.399-399
• /
• 2016

현대 인류는 비약적인 경제성장으로 인하여 급격한 도시화와 산업화를 이루었다. 하지만 이러한 성장을 위해 수반되는 자원개발 및 생활환경조성으로 인한 토지개발이 진행되어 많은 양의 토양이 유실되고 있다. 토양유실을 관리하기 위해서는 모니터링을 통해 관리하는 방법과 모형을 통해 유실되는 토양의 양을 산정하여 관리방안을 제시하는 방법이 있다. 현재 전 세계적으로 사용되고 있는 범용토양유실량 산정공식(USLE)은 사용상의 편리성과 연간 토양유실량을 산정할 수 있는 이점이 있다. 뿐만 아니라 국내의 환경부에서는 USLE 공식을 적용한 '표토 침식 현황에 관한 고시'를 제정하여 유실되는 표토를 관리하고 있다. 하지만 USLE 공식을 구성하고 있는 인자 중 P factor는 경사도만을 고려하여 인자 값을 제시하고 있으며, 밭에 적용된 관리방법과 작물, 경운방법 등을 고려하지 않아 방법에 차이에 따른 발생되는 토양유실량에 차이가 발생하게 된다. 이러한 문제점을 고려하여 경작지의 경사도와 적용된 관리방안을 복합적으로 고려한 P factor 선정 체계가 필요한 시점이다. 따라서 본 연구에서는 실제 경작지 조사를 통해 경작지 별 관리방안과 경사도를 고려한 P factor를 제안하고자 한다. 관리방안과 경사도를 복합적으로 고려한 P factor를 제안하기 위해 선정된 유역은 강원도 양구군 해안면 유역과 자운리 유역, 안동시 임동면 반변천 상류 유역을 선정하여 위치하고 있는 밭에 대한 현장조사를 진행하였다. 조사항목은 경작지의 경사도, 재배작물, 관리방법, 경운방법 등을 조사하였으며, 이를 바탕으로 경사도와 관리방법을 복합적으로 고려한 P factor를 재산정 하였다. P factor를 재산정한 결과 대상 유역 내 밭에 적용된 관리방법과 경운방법, 재배작물의 차이로 인해 상이한 값이 산정되었다. 또한 기존 P factor와 재산정된 P factor를 사용하여 산정한 토양유실량의 차이가 약 17%정도 나타났다. 따라서 본 연구를 통해 재산정된 P factor는 토양유실에 직간접적으로 관여하는 조건들을 복합적으로 고려한 P factor로써 정확한 토양유실량을 산정하는데 기여할 것으로 판단되며, 본 연구를 바탕으로 전국단위 USLE P factor를 산정을 위한 추가적인 연구가 필요하다고 판단된다.

• Journal of Digital Convergence
• /
• v.19 no.10
• /
• pp.75-86
• /
• 2021

Recently, the domestic BIPV market is expected to revitalize with the introduction of the "zero-energy building certification system(2020~)", but it is somewhat stagnant due to the rigidity of definitions in the current domestic BIPV construction standards. Also, since there is delaying revision on definition and standardization of BIPV, the system is so weak that there are cases where it has been approved as BIPV simply by installing a structure on the wall and fixing the module roughly. The damage caused by this can be passed on to consumers, and it can only create a negative perception of BIPV and jeopardize the entire market. The BIPV definition was prepared through a Delphi survey of related experts about market stagnant cause, unreasonable regulation, etc, and a revised plan was derived accordingly.

• Journal of Digital Convergence
• /
• v.16 no.11
• /
• pp.201-209
• /
• 2018

This study seeks to examine the effect of customer orientation on customer loyalty and employee loyalty mediated by two dimensions of corporate social responsibility (CSR), discretionary and ethical dimensions. This study examined the effects of customer orientation on discretionary responsibility and ethical responsibility. Additionally, it examined the effect of discretionary responsibility and ethical responsibility on customer loyalty and organizational loyalty. In order to verify the hypothesis, we surveyed the employees of large companies and analyzed 239 valid data. First, customer orientation has a significant positive impact on discretionary responsibility. Second, customer orientation has a significant positive impact on ethical responsibility. Third, discretionary responsibility has a significant positive impact on customer loyalty. Fourth, discretionary responsibility has a significant positive impact on organizational loyalty. However, ethical responsibility does not predict customer loyalty and organizational loyalty. Theoretical and practical implications of the results of this study, limitations and directions for future research are discussed.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.2
• /
• pp.123-130
• /
• 2019

The purpose of this study is to confirm the strength characteristics of concrete according to the mixing ratio of recycled fine aggregates and to use it as basic data for the use of recycled fine aggregates in concrete. For this purpose, the target design compression strength was set at 27MPa. Considering practical use of recycled aggregate, the mixing ratio of recycled fine aggregate was set at 0, 30, 60, and 100%, and the unconfined concrete and hardened concrete were tested. The LCA method was used to evaluate the environmental impact of recycled fine aggregate concrete, and the effectiveness of recycled fine aggregate in the production of concrete was verified.

• The Journal of Engineering Geology
• /
• v.28 no.4
• /
• pp.583-592
• /
• 2018

Recently, concern has arisen regarding the lowering of groundwater levels in the hinterland caused by the development of high-capacity radial collector wells in riverbank filtration areas. In this study, groundwater levels are estimated using Modflow software in relation to the water volume pumped by the radial collector well in Anseongcheon Stream. Using the water volume data, an artificial neural network (ANN) model is developed to determine the amount of water that can be withdrawn while minimizing the reduction of groundwater level. We estimate that increasing the pumping rate of the horizontal well HW-6, which is drilled parallel to the stream direction, is necessary to minimize the reduction of groundwater levels in wells OW-7 and OB-11. We also note that the number of input data and the classification of training and test data affect the results of the ANN model. This type of approach, which supplements ANN modeling with observed data, should contribute to the future groundwater management of hinterland areas.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.180-191
• /
• 2020

This study analyzes factors that affect average daily travel time budgets, using the Time Use Survey data from 1999 to 2014 in Seoul. We first developed multivariate regression models for travel time from each year, considering demographic and socio-economic variables as well as non-home activity time. The model results showed that household and personal characteristics and non-home activities significantly affect travel time, and their effects are different over time. In addition, we developed seemingly unrelated regression (SUR) models for time allocation for non-home activity and travel, considering their correlations, and explanatory variables were compared over time. Overall, demographic and socio-economic variables significantly affect travel time as well as non-home activity time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.5
• /
• pp.623-629
• /
• 2020

In this paper, a multiple transmission communication system employing ranging based transmission timing adjustment capability is proposed. In addition, a decision feedback equalizer with the use of combinations of soft decision and hard decision adequate to the proposed multiple transmission communication system is also proposed. The proposed ranging based transmission timing adjustment capability makes the received signals from the multiple transmission points centered on the different symbol timing boundaries. The decision making method for the inputs to the proposed decision feedback equalizer is adaptively selected between soft decision and hard decision as per channel conditions like SNR. The performance of the proposed method had been analyzed through the simulation under the fading channel environments and compared with the previous methods. The simulation results showed performance improvement of the proposed method over the existing ones without noticeable increments in complexities.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.5
• /
• pp.169-174
• /
• 2022

This study is to verify the feasibility of SiC single crystal growth using recycled SiC powder. The fundamental physical properties such as particle size, shape, composition and impurities of the recycled powder were analyzed, and the sublimation behavior occurring inside the reactor were predicted using the basic data. As a result of comprehensive judgment, the physical properties of the recycled powder were suitable for single crystal growth, and single crystal growth experiments were conducted using this. 100 mm 4H-SiC single crystal ingot with a height of 25 mm was grown without polytype inclusion. In the case of micro-pipe density was 0.02 ea/cm² and resistivity characteristics was 0.015~0.020 ohm·cm², commercial level quality was obtained, but additional analysis related to dislocation density and stacking faults is required for device application.

• Journal of Korea Foundry Society
• /
• v.42 no.3
• /
• pp.153-160
• /
• 2022

The effect of thickness on the microstructure and the mechanical properties of centrifugal cast 625 was investigated. Centrifugal cast 625 with various thickness of 10, 17 and 50mm showed partially columnar grained structure 8, 12.3 and 18.5mm respectively from the outer surface. Secondary dendrite arm spacing in the columnar grains slightly increased with increasing casting thickness. Tensile strength of the columnar region was similar regardless of casting thickness. Solidification behavior of the columnar grained region is similar to that of directional solidification, thus solidification rate in the centrifugal cast tube was extrapolated from the secondary dendrite arm spacing data of the directionally solidified material. The equiax grained region formed interior of the thick castings. The tensile strength of the equiaxed region showed the average value of the columnar region which is presumably originated from the grain structure rather than secondary dendrite arm spacing.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.12
• /
• pp.101-110
• /
• 2017

According to the Statistics Korea in 2016, 56.9% of companies do not fairly pay compensation for employee invention, despite the increasing proportion of the inventions in corporations. One reason is that the objective calculation method for employee and patent's contribution and the clear standard of fair compensation have not been established. Therefore, this study proposes a new calculation method using DCF (Discounted cash flow) and AHP (Analytical hiearchy process) methodology to calculate the fair amount of employee invention compensation, and verified it through real case examples. As a result, 2.3 times higher amount of compensation was calculated than the previous approach. This study is meaningful that it provided objective compensation criteria that could more protect the inventor in the situation which the clear criteria for the calculation of fair compensation are not established. This methodology is expected to be applicable for SMEs as employee invention compensation.