• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.453-453
• /
• 2022

4대강 유역에 설치되어 운영되고 있는 보의 개방을 통해 하천의 수질 개선 및 자연성 회복을 추진하고자 하는 정부정책에 따라 2017년부터 낙동강 유역 내 일부 보의 수문을 개방하고 모니터링을 진행 중에 있다. 그러나 보 건설 이후, 하천 주변의 농업형태 및 농업용수 취수 조건이 변화하였고, 보 개방에 따른 하천 주변 지역 지하수위 변화로 인한 농업용수 부족 현상이 발생하였다. 정부에서는 보 주변의 농업 현황 조사, 지하수 현황 조사 및 용수 공급 지원 등을 추진하고 있으나, 하천 주변의 농민들은 보 개방으로 인해 발생할 수 있는 농업용수부족 및 이에 따른 농업피해에 대한 우려를 나타내고 있다. 특히 지하수의 지열을 사용하여 겨울철 시설재배 농작물의 보온을 하는 '수막재배' 방법을 활용하는 농가의 경우 지하수위 저하에 따른 난방비 증가 및 농작물 냉해 피해가 발생함에 따라 보 개방에 대한 반대 입장을 고수하고 있다. 하천 주변에 분포하는 지하수는 하천의 영향을 받으며, 지표수와 지하수는 기저유출 등을 통해 상호영향을 받는 물 순환의 구성요소이므로, 보 개방으로 인한 하천수위 변화에 따른 주변지역 지하수위의 변화 패턴에 대한 체계적인 조사와 분석이 필수적이다. 따라서 본 연구에서는 낙동강 보 개방 모니터링을 위한 관측정 설치의 필요성을 조사/분석하고 최적의 관측지점에 설치하여 지속적으로 모니터링을 수행하고자 한다. 이를 통해 보 개방에 따른 주변지역 지하수 영향에 대한 조사 및 분석이 보 개방 모니터링 전후로 수행되어, 보 개방에 따른 지하수 환경 내 영향 분석, 농업형태에 따른 지하수 활용 영향 및 지하수 장애 발생 시 임시대책/항구대책 제시 등을 추진할 수 있어야 한다. 이에 따라 정부와 Kwater는 보 개방에 따른 현장조사 및 분석을 통한 지하수 관측정을 설치하고 지속적인 모니터링을 추진하고 있다. 2019년 현재, 낙동강 유역에는 총 194개소의 지하수 관측정이 있으며, 향후 수막재배를 많이 활용하고 있는 시설재배 농업단지 등을 보 개방에 따른 지하수 이용장애 민원 우려지역을 중심으로 지하수 관측정을 추가로 설치하여 보 개방에 따른 지하수 영향 분석 및 이에 대한 용수공급 대책 마련 등을 위한 기초자료 활용될 것으로 기대한다.

• 지역과문화
• /
• v.6 no.1
• /
• pp.57-80
• /
• 2019

In this study, we will investigate Nujung culutre of Seobuk-jung in Hamra, which is representative Nujung in the modern period Iksan region, and examine how to use it as local contents. Hamra, where Seobyeog-jeong is located, was an economic center in the Joseon Dynasty. Under the historical and economic background, Seobyeong-jeong was erected by Lee, Chip-chon in 1926. The study of Seobyeong-jeong and Nujung culture erected by the Landloard family of Honam in modern times can be used as an important data for understanding the Nujung culture of modern Iksan Proviance.

• Journal of the Korean Society of Radiology
• /
• v.82 no.4
• /
• pp.982-987
• /
• 2021

The coronary sinus (CS) is the venous drainage system of the heart. CS ostium atresia is a rarely seen cardiac malformation. Congenital atresia of the CS is usually found together with persistent left superior vena cava (LSVC) and other cardiac malformations. However, isolated congenital atresia of the CS is very rare. We present a rare case of isolated congenital atresia of the CS connecting the left atrium and coronary veins without persistent LSVC in a 58-year-old female.

• Polymer(Korea)
• /
• v.32 no.2
• /
• pp.103-108
• /
• 2008

Osmotic pellet, which consisted of water-swellable seed layer, drug layer, and porous membrane layer, has been widely utilized in oral drug delivery system. In this work, we describe the preparation of osmotic pellet with nifedipine as model drug and a mixture of cellulose acetate (CA) and Eudragit RS as membrane layer, and then examined the drug release behavior on the variation of the thickness change of membrane layer (CA and Eudragit RS) and release media. Furthermore, we examined the nifedipine release behavior using sodium alginate as a potential membrane candidate. Osmotic pellet was obtained in the quantitative yield by fluidized bed coater. Osmotic pellet exhibited the round morphology and the size ranging $1500{\sim}1700{\mu}m$ in SEM. The nifedipine release decreased as the thickness of membrane layer (CA and Eudragit RS) increased. In addition, it observed that there is difference of release amount in between intestinal juice (pH 6.8) and gastric juice (pH 1.2). In the case of osmotic pellet coated with sodium alginate, nifedipine release behavior depended on the crosslinking of sodium alginate layer. In conclusion, we found that various membrane layers could control the release amount of nifedipine.

• The Journal of Engineering Geology
• /
• v.29 no.4
• /
• pp.509-529
• /
• 2019

This study performs to evaluate the role of filter material at alluvial well for intake of riverbank filtration and the applicability and improvement effect of dual filter well. To achieve this objective, dual filter intake well and single filter intake well were installed with different filter conditions at riverbank free surface aquifer in soil layer then we evaluated filter material condition, permeability, optimum yield and well efficiency according to yield in drawdown test. As a results, we assumed forming dual filter layer minimizes sudden speed changes at boundary between aquifer and filter layer by cushioning of groundwater flow. This suppresses warm current then intake groundwater efficiently, therefore it seems decreasing peripheral groundwater level changes in spite of higher intake water amount than single filter intake well. Furthermore, we confirmed by test, installing dual filter improves permeability, optimum yield and well efficiency. The result will be used by combining with former study to set up standard of design/construction of dual filter intake well at alluvial aquifer layer. Furthermore, we expect this result will be used to prove application effect of dual filter intake well compared to single filter one and radial collector well which are mainly applied on riverbank filtration.

• The Journal of Engineering Geology
• /
• v.26 no.3
• /
• pp.331-337
• /
• 2016

Radial collector wells (RCWs) have been managed by Korea Rural Community Corporation (KRC) since 1983, installing 98 wells for agriculture in rural area over the country. Among them, 20 wells were installed upstream of 5 subsurface dams and the remaining were installed regardless of the subsurface dam. Most of RCWs have been developed in 1980s and 1990s, and 83 wells have been passed more than 20 years after construction. The number of horizontal arms for RCWs varies from 9 to 28, with length and diameter being 10~30 m and 65 mm, respectively. The central caisson with an inner diameter of 3.5 m was commonly constructed to a depth of 10 m. The maximum pumping rates in RCWs, which are located at distances of 10 to 1,200 m from the river, are 2,000~10,000 m³/day. RCW has a fundamental problem that reduced pumping capacity and degraded well efficiency, due to the physical and chemical clogging. From the feasibility test for improving RCW performance, specific capacity increased to 67% after rehabilitation. TV logging for RCW horizontal arm shows that near the caisson is more severe clogging. From the results of this study, KRC has established the guidebook for monitoring and improving well efficiency through physical/chemical treatment, well logging, and hydraulic tests and managed RCWs periodically with its rehabilitation methods.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.6
• /
• pp.383-388
• /
• 2019

High purity SiC fine powder with metal impurity contents of less than 1 ppm was synthesized by improved carbothermal reduction process, and the synthesized powder was used for SiC single crystal growth in RF heating PVT device at temperature above 2,100℃. In-situ x-ray image analyzer was used to observe the sublimation of the powder and single crystal growth behavior during the growth process. SiC powder was used as a source of single crystal growth, exhausted from the outside of the graphite crucible at the growth temperature and left graphite residues. During the growth, the flow of raw materials was concentrated in the middle and influenced the growth behavior of SiC single crystals. This is due to the difference in temperature distribution inside the crucible due to the fine powder. After the single crystal growth was completed, the single crystal ingot was cut into a 1 mm thick single crystal substrate and finely polished using a diamond abrasive slurry. A dark yellow 4H-SiC was observed overall of single crystal substrate, and the polycrystals generated in the outer part may be caused by the incorporation of impurities such as the bubble layer mixed in the process of attaching the seed crystal to the seed holder.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.14 no.4
• /
• pp.359-364
• /
• 1985

Being used the three kinds of aqueous solution of tobacco extracts as a new experimental material, experiment and theoretical analysis are performed. Measurements are made with a apparatus designed and constructed by the author.The average diameter of the ice crystals is 0.04-0.1cm between 0.2 and $0.6^{\circ}C$ of the subcooling temperature of the solution. The growth rate of ice crystals in direction of axies A, $V_a$ is in proportion to the subcooling temperature, viz; $v_a=0.058{\Delta}t_b,\;where\;{\Delta}t_b<0.1^{\circ}C$ The growth rate of ice crystal have to be considered not only the mass diffusion and the heat transfer of rate controlling but also the process in ice crystallization. The growth rate of ice crystal is found to be independent on the concentration of the solution and a diameter of ice crystal.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.2
• /
• pp.97-106
• /
• 2009

It is known that the natural amethyst is changed to citrine after heat treatment. However, when all amethyst samples from Zambia were heat-treated in the temperature range of $350{\sim}380^{\circ}C$ for 1 hour, the result was that five out of eight samples were changed to citrine and all the rest of samples became rock crystal quartz. These differences in the color appearance seem to be influenced by the original colors contained in the amethyst before the heat treatment. The amethyst containing yellow color changed to citrine and the amethyst without containing yellow color changed to rock crystal quartz after the heat treatment. The results compared after the instrumental analysis on the difference of color change, it showed the differences of peak intensity in 3,400 $cm^{-1}$ and the existence and non-existence of peak at the range of 5,200${\sim}$5,400 $cm^{-1}$ in FTIR. It revealed the difference in the quantity of Cr which is a trace element in the WD-XRF analysis. The identical result in the FTIR spectra before and after the heat treatment reveals that the heat treatment did not cause any change in the main composing elements or crystal structure.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.6
• /
• pp.722-727
• /
• 2007

Life Cycle Assessment(LCA) is a tool that quantifies the inputs and outputs, md evaluates the potential environmental impacts during the entire life cycle of a product, material and/or service. Inputs and outputs encompass the consumption of natural resources and emission of pollutants to the environment. One of the deficiencies of the conventional LCA methodology is that it does not consider time explicitly. In addition, there are problems associated with the temporal boundary in the normalization step of LCA. The objective of this study is to propose a new life cycle assessment method that considers time in LCA as called 'Time Load LCA'. Basically Time Load LCA is a method that divides environmental load in each life cycle stage by time duration in each life cycle stage. Time consideration in the proposed method indicated that the new LCA method not only renders new perspective on the environmental impacts of a product system but also rectifies inconsistency in temporal dimension of the normalization step. Basic premise of the time load LCA method is that same amount of load over a shorter time period would affect more seriously on the environment than over a longer time period. therefore, load per time is necessary for the assessment of an impact of the inventory parameters on the environment.